Repair ALL A70 here - Page 5 - GSM-Forum

yargich · 07-26-2006, 11:32

@BB-gsm good work man testet 100%

BB-gsm · 07-26-2006, 11:46

Quote:

Originally Posted by Mapamann

Hi...

i get the following error while i try to flash a A70 with the files from the first post:

Open file "D:\Dokumente und Einstellungen\Mapamann\Desktop\A70_4MB_221D_FF.bin " for write in Flash.
FullFlash file info:
FlashID: 0001/221D
SIEMENS A70 Sw32 lg91
RealLgPack: lg91
Start...
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Warning: HASH data error!
SIEMENS A70 lg98 Sw32
Soft FlashID: 0001/221D
FlashID: 0001/227E-221D-2200
Flash Size: 4Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 64Kb
Start EEPROM segments at addres 0xBC0000
FSN: D2E94BC2 -> PhoneID: C24BE9D2
OTP IMEI: 356468003321147
HASH: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
ClearFlashSeg at 0x810000 does not answer!

what can i do??

You are NOT using Joker v0343,

Try it!

Regards,
B

Mapamann · 07-26-2006, 12:06

Quote:

Originally Posted by BB-gsm

You are NOT using Joker v0343,

Try it!

Regards,
B

Sure...its Joker v0343 I'm using...

Tr0nAd0r · 07-26-2006, 14:46

@BB-gsm you have flashes of A71 (850/1900) phones??

BB-gsm · 07-26-2006, 14:58

Quote:

Originally Posted by Mapamann

Sure...its Joker v0343 I'm using...

Strange I cant see Baudrate, well it should be hardware problem, Flash IC must be resoldered or changed probably ...

Quote:

Originally Posted by Tr0nAd0r

@BB-gsm you have flashes of A71 (850/1900) phones??

No, Sorry I get non-europe band phones very rarely !

Regards,
B

.::Mystic::. · 07-27-2006, 06:40

Quote:

Originally Posted by Tr0nAd0r

@BB-gsm you have flashes of A71 (850/1900) phones??

i have them.
check my website

Tr0nAd0r · 07-27-2006, 23:18

Quote:

Originally Posted by .::Mystic::.

i have them.
check my website

Thanks

.

sundance77 · 07-28-2006, 07:38

Hello everybody,

I have a STRANGE SITUATION. Don't ask why!
I must block a A70 cellphone on a network ( it happend to me

) ). So i make a testpoint and put some flash ( soft) on the phone. After that the phone is unbarred ( that's the problem). How could I lock back the phone on my network. I used flash:A70lg4Sw32_80-40_FF.bin, Joker JokerV0341.exe and a cable USB F30032P465A1. The SST v6.50 doesn't recognise A70.

Please help. It's another software that I can use, or the cable is not right, or ......???

Thanx

GSMSERVE · 07-28-2006, 10:18

really goooooooooooooooood work.
thanks man

KelvinShadow · 08-02-2006, 15:26

@BB-gsm..

I have a Siemens A-70, got it but not power on..

Used service mode:
-----------------------------------------------------------
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 241 (A70)
A70 lg98 Sw13 25.05.05 16:29:10
IMEI: 356471002147125
DisplayID: 52, Hyundai D0986EF
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0C): Keys miss in BCORE (CleanBCORE)
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(1A): Block 76 is accessible
Code(1C): Block 5123 is not found
Battery Voltage very low! 3690 mV!
SecurityMode: Customer
----------------------------------------------------------
I used Joker 0.3.4.3, en your repair flash file, still the same..

After flash it says, 'use freeze' But using freeze it says 'no ping'.

Can you help me out..

Thanks in advance!

Kelvin

**GSM MIND** · 08-03-2006, 07:07

wow great work i didnt get phone after reading this post but hope that it well work for me when i got phone i must post the result

REGARDS

GSM MIND

TheRascal · 08-03-2006, 07:22

Quote:

Originally Posted by KelvinShadow

@BB-gsm..

I have a Siemens A-70, got it but not power on..

Used service mode:
-----------------------------------------------------------
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 241 (A70)
A70 lg98 Sw13 25.05.05 16:29:10
IMEI: 356471002147125
DisplayID: 52, Hyundai D0986EF
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0C): Keys miss in BCORE (CleanBCORE)
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(1A): Block 76 is accessible
Code(1C): Block 5123 is not found
Battery Voltage very low! 3690 mV!
SecurityMode: Customer
----------------------------------------------------------
I used Joker 0.3.4.3, en your repair flash file, still the same..

After flash it says, 'use freeze' But using freeze it says 'no ping'.

Can you help me out..

Thanks in advance!

Kelvin

Try "Freeze" by full charged battery

KelvinShadow · 08-03-2006, 11:39

Quote:

Originally Posted by TheRascal

Try "Freeze" by full charged battery

--------------------------------------------------------------

Freeze...
No Ping mobile
Get IMEI...
No Ping mobile
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6

---------------------------------------------------------------

---------------------------------------------------------------
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
MobileMode: Service
HWID: 241 (A70)
A70 lg98 Sw13 25.05.05 16:29:10
IMEI: 356471002147125
DisplayID: 52, Hyundai D0986EF
FSN: 5BB90C94
SW FlashID: 0001/220C
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0C): Keys miss in BCORE (CleanBCORE)
Code(13): Complete access to BFB
Code(15): Complete condition
Code(1A): Block 76 is accessible
Code(1C): Block 5123 is not found
Battery Voltage 4197 mV.
SecurityMode: Factory
---------------------------------------------------------------
Using 'Service Mode' display phone shows "Service Mode"

---------------------------------------------------------------
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 241 (A70)
A70 lg98 Sw13 25.05.05 16:29:10
IMEI: 356471002147125
DisplayID: 52, Hyundai D0986EF
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4124 mV.
SecurityMode: Customer
Get IMEI...
IMEI: 356471002147125
Freeze...
Use IMEI: 356471002147125
Freeze: IMEI Freeze Failed or OTP IMEI is already written!
Freeze BCORE data - Ok.
---------------------------------------------------------------

Did this, but still the same not powering on..

Any other solutions? Please...

BB-gsm · 08-03-2006, 21:41

@ KelvinShadow

All you have to do is to writee the proper flashfile and after flashing press Recalc all keys !

Is it so difficult ?!

Regards,
B

KelvinShadow · 08-04-2006, 11:59

Quote:

Originally Posted by BB-gsm

@ KelvinShadow

All you have to do is to writee the proper flashfile and after flashing press Recalc all keys !

Is it so difficult ?!

Regards,
B

Yeah, it was hard to do cause it wouldn't work..

But thanks, for your advice!

Got it back working!

Thanks a lot!

Regards,

Kelvin

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Repair ALL SX1 here	BB-gsm	E-Gold Based Phones	110	03-26-2022 15:25
Repair all alcatel here!!!	libra202	Alcatel TCL Hardware Repair	72	02-20-2016 18:28
Repair ALL A65 here ... ;-)	BB-gsm	E-Gold Based Phones	298	07-04-2011 21:06
Repair all A75 here	.::Mystic::.	E-Gold Based Phones	15	01-12-2008 15:10
Repair all CF62 here	.::Mystic::.	E-Gold Based Phones	34	12-01-2007 06:02

07-26-2006, 11:32	#61 (permalink)
yargich No Life Poster Join Date: May 2003 Location: King of Nokia Age: 47 Posts: 581 Member: 28531 Status: Offline Thanks Meter: 90	@BB-gsm good work man testet 100%

07-26-2006, 14:46	#64 (permalink)
Tr0nAd0r No Life Poster Join Date: May 2004 Location: Colombia Age: 35 Posts: 889 Member: 64398 Status: Offline Thanks Meter: 153	@BB-gsm you have flashes of A71 (850/1900) phones??

07-28-2006, 07:38	#68 (permalink)
sundance77 Junior Member Join Date: Jun 2006 Posts: 1 Member: 299650 Status: Offline Thanks Meter: 0	Hello everybody, I have a STRANGE SITUATION. Don't ask why! I must block a A70 cellphone on a network ( it happend to me ) ). So i make a testpoint and put some flash ( soft) on the phone. After that the phone is unbarred ( that's the problem). How could I lock back the phone on my network. I used flash:A70lg4Sw32_80-40_FF.bin, Joker JokerV0341.exe and a cable USB F30032P465A1. The SST v6.50 doesn't recognise A70. Please help. It's another software that I can use, or the cable is not right, or ......??? Thanx

07-28-2006, 10:18	#69 (permalink)
GSMSERVE No Life Poster Join Date: Sep 2004 Location: Setif ALGERIA Age: 44 Posts: 817 Member: 80990 Status: Offline Sonork: 100.1583974 Thanks Meter: 312	really goooooooooooooooood work. thanks man

08-02-2006, 15:26	#70 (permalink)
KelvinShadow Freak Poster Join Date: Sep 2005 Posts: 257 Member: 178726 Status: Offline Thanks Meter: 69	@BB-gsm.. I have a Siemens A-70, got it but not power on.. Used service mode: ----------------------------------------------------------- Loading ServiceBoot... Sending ServiceBoot Ok. HWID: 241 (A70) A70 lg98 Sw13 25.05.05 16:29:10 IMEI: 356471002147125 DisplayID: 52, Hyundai D0986EF Code(05): OTP closed Code(09): BootKEY is written in EEPROM Code(0C): Keys miss in BCORE (CleanBCORE) Code(10): Minimal access to BFB Code(15): Complete condition Code(1A): Block 76 is accessible Code(1C): Block 5123 is not found Battery Voltage very low! 3690 mV! SecurityMode: Customer ---------------------------------------------------------- I used Joker 0.3.4.3, en your repair flash file, still the same.. After flash it says, 'use freeze' But using freeze it says 'no ping'. Can you help me out.. Thanks in advance! Kelvin

08-03-2006, 07:07	#71 (permalink)
GSM MIND Product Manager Join Date: Feb 2003 Location: Your Exclusive Source Posts: 2,881 Member: 20645 Status: Offline Sonork: 100.1579175 Thanks Meter: 635	wow great work i didnt get phone after reading this post but hope that it well work for me when i got phone i must post the result REGARDS GSM MIND

08-03-2006, 21:41	#74 (permalink)
BB-gsm No Life Poster Join Date: Jul 2004 Location: GEORGIA,Tbilisi Posts: 3,393 Member: 75765 Status: Offline Thanks Meter: 722	@ KelvinShadow All you have to do is to writee the proper flashfile and after flashing press Recalc all keys ! Is it so difficult ?! Regards, B