Bootcore version on handset 0A52 - GSM-Forum

snipergsm · 01-27-2007, 19:35

v3r (R4515)
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0A52
ERROR: Not supported Model/Bootloader!

leemobile · 01-27-2007, 20:40

you will need to use testpoint on that bootloader im afraid

or buy one of the magic testpoints (or make one)

snipergsm · 01-28-2007, 19:33

good worck my friend great thankx

Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0300
Sending RAMDLD to handset
RAMDLD started ok in handset
Read Flash chip type and ID
Flash chip ID detected: 0x0020880E
Direct unlock method selected
Started unlocking sequence
Power down handset
Unlocking sequence completed ok

nnaeem11 · 01-29-2007, 08:21

these models and bootloaders are supported b GOT and at the end there is very clear notification of that we can't unlock bootloader A0.52 so its not the problem from software.

http:///vbb/showthread.php?t=366192

and always check the sticky threads of every BOX n service u have so u can know what update is available for ur BOX.

NAEEM FAROOQUI.

01-27-2007, 19:35	#1 (permalink)
snipergsm Registered User Join Date: Jun 2004 Age: 46 Posts: 715 Member: 68983 Status: Offline Thanks Meter: 55	Bootcore version on handset 0A52 v3r (R4515) Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0A52 ERROR: Not supported Model/Bootloader!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to know about original firmware version of handset if handset flashed by other	somratjisan	Infinity-Box	1	10-01-2009 14:09
bootcore version is different from firmware version	phoneteam	DreamBox	3	04-06-2008 13:46
>>>> V3X R25221LD_U bootcore version 0683 flashfile needed <<<<<	keaelite	Ultima Box Light	14	11-06-2007 15:47
Critical Error DE AD on V3r 0A52??	macrotech	Smart-Clip	13	05-03-2007 00:01

01-27-2007, 20:40	#2 (permalink)
leemobile Freak Poster Join Date: Jan 2003 Location: inside apple products Posts: 246 Member: 20366 Status: Offline Thanks Meter: 10	you will need to use testpoint on that bootloader im afraid or buy one of the magic testpoints (or make one)

01-28-2007, 19:33	#3 (permalink)
snipergsm Registered User Join Date: Jun 2004 Age: 46 Posts: 715 Member: 68983 Status: Offline Thanks Meter: 55	good worck my friend great thankx Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0300 Sending RAMDLD to handset RAMDLD started ok in handset Read Flash chip type and ID Flash chip ID detected: 0x0020880E Direct unlock method selected Started unlocking sequence Power down handset Unlocking sequence completed ok

01-29-2007, 08:21	#4 (permalink)
nnaeem11 No Life Poster Join Date: May 2005 Location: MIND MAKING COMPANY Age: 44 Posts: 1,686 Member: 144640 Status: Offline Sonork: nnaeem11 Thanks Meter: 238	these models and bootloaders are supported b GOT and at the end there is very clear notification of that we can't unlock bootloader A0.52 so its not the problem from software. http:///vbb/showthread.php?t=366192 and always check the sticky threads of every BOX n service u have so u can know what update is available for ur BOX. NAEEM FAROOQUI.