MY210X unlock sucess with Smti

[landri]

i have used the tp bellow without the 2 resistors.

i have also connected only RX , TX , and GND

1000% with SMTI BOX

[landri]

brther u must have the smti box to do it

[zullu2004]

Found Phone, Phone Info:
- Phone Type: my210X
- Phone FW: LA5,OG: 120407 1501
- Phone HT : 2A 10 05
- Phone IMEI: 3524880133xxxxx
- Product Code: 252934970

- MCP NOR Flash ID: 00 01 2A 7E 2A 24 2A 00
- Chip(0): Spansion S29NS032J 32Mbit

Get Code from server ...Success!

- Net code: 40344832-49

yes, phone unlock
1.simple cable with no resistence
2.conect to phone rx, tx,gnd
3.power on the phone, then conect cable to box (baterry full)
4.detect phone, read code
5.enter manualy the net code

phone unlock

[.:==di@bila==:.]

Originally Posted by zullu2004

Found Phone, Phone Info:
- Phone Type: my210X
- Phone FW: LA5,OG: 120407 1501
- Phone HT : 2A 10 05
- Phone IMEI: 3524880133xxxxx
- Product Code: 252934970

- MCP NOR Flash ID: 00 01 2A 7E 2A 24 2A 00
- Chip(0): Spansion S29NS032J 32Mbit

Get Code from server ...Success!

- Net code: 40344832-49

yes, phone unlock
1.simple cable with no resistence
2.conect to phone rx, tx,gnd
3.power on the phone, then conect cable to box (baterry full)
4.detect phone, read code
5.enter manualy the net code

phone unlock

Must connecty cable to phone and Power on before connecting cable to box?

I tied this many time but never worked for me maybe GND section is wrong soldered.

[pyjaman]

Originally Posted by zullu2004

Found Phone, Phone Info:
- Phone Type: my210X
- Phone FW: LA5,OG: 120407 1501
- Phone HT : 2A 10 05
- Phone IMEI: 3524880133xxxxx
- Product Code: 252934970

- MCP NOR Flash ID: 00 01 2A 7E 2A 24 2A 00
- Chip(0): Spansion S29NS032J 32Mbit

Get Code from server ...Success!

- Net code: 40344832-49

yes, phone unlock
1.simple cable with no resistence
2.conect to phone rx, tx,gnd
3.power on the phone, then conect cable to box (baterry full)
4.detect phone, read code
5.enter manualy the net code

phone unlock

Found Phone, Phone Info:
- Phone Type: my210X
- Phone FW: LA5,OG: 120407 1501
- Phone HT : 2A 10 05
- Phone IMEI: 3524880xxxxxx
- Product Code: 252934970

- MCP NOR Flash ID: 00 01 2A 7E 2A 24 2A 00
- Chip(0): Spansion S29NS032J 32Mbit

Get Code from server ...Success!

- Net code: 38643573-15


work for me too thx Bro

[nabildeco@yahoo]

for me ... didn't work ...where did u made ur ground ???????? and about rx and tx ... is it 5th and 4th for smti ???????????????

[pyjaman]

hi
tx is the 4 th ( brown)
rx is 5 th ( grey )
gnd is 1st ( orange )

i soldered gnd near connector.

[DZStorm]

@nabildeco@yahoo

Universal RJ45 Cabel For SMTi

SMTi RJ45 -1 4.8v
SMTi RJ45 -2 TDO
SMTi RJ45 -3 TDI
SMTi RJ45 -4 TX
SMTi RJ45 -5 RX
SMTi RJ45 -6 TMS
SMTi RJ45 -7 TCK
SMTi RJ45 -8 GND
----------------------------
Ground is ground , same basic for all electric & electronic devices , & Gnd on pinout not mean to be only there as shown
on shem . but some people sometimes try to solder in diffrent zone because soldering deficult a little & that's normal if gnd related with big area of board it need more temperature , try to scratch a little gnd zone then solder .
I think that's ennough as lesson about GND , So try to be arround

[snsoftkiller]

Originally Posted by DZStorm

@nabildeco@yahoo

Universal RJ45 Cabel For SMTi

SMTi RJ45 -1 4.8v
SMTi RJ45 -2 TDO
SMTi RJ45 -3 TDI
SMTi RJ45 -4 TX
SMTi RJ45 -5 RX
SMTi RJ45 -6 TMS
SMTi RJ45 -7 TCK
SMTi RJ45 -8 GND
----------------------------
Ground is ground , same basic for all electric & electronic devices , & Gnd on pinout not mean to be only there as shown
on shem . but some people sometimes try to solder in diffrent zone because soldering deficult a little & that's normal if gnd related with big area of board it need more temperature , try to scratch a little gnd zone then solder .
I think that's ennough as lesson about GND , So try to be arround

Is it same cable than SCDR cable pinouts ?

[DZStorm]

@SNSOFTKILLER

Yes !! both Same !

[.:==di@bila==:.]

Give us correct GND location instead of asking if we SMFTI user dont know where its located.
I cut my SMTI cable and solder this to phone but still cant connect to Box.

So what had really gone wrong?

[negm--]

JOB "READ CODE":

Found Phone, Phone Info:
- Phone Type: my210X
- Phone FW: LC5,OB: 180407 1733
- Phone HT : 80 1C 05
- Phone IMEI: 352488012927852
- Product Code: 252918158

- MCP NOR Flash ID: 00 01 2A 7E 2A 24 2A 00
- Chip(0): Spansion S29NS032J 32Mbit

Get Code from server ...Unsupported!

[ras]

Originally Posted by SNSOFTKILLER

Is it same cable than SCDR cable pinouts ?

Hello,
The easy way out, if u have extra cable from 501c 0r 501x, i mean the rj45,
cut off one end and and follow the schematic properly, all will be ok. tested it and worked 10000% OK
.

[bifout]

i tried this and i have this probleme when i puch "detect phone" it's gave me the info

when i try to make read code it says remove battery and when i do that it gives me that error

POWER ON PHONE ...Fail!

- ERROR: READING PHONE DATA!

i tried this many time

i think that doing unlock whitout the two resistors cause this kind of problem

[negm--]

Found Phone, Phone Info:
- Phone Type: my210X
- Phone FW: LC5,OB: 180407 1733
- Phone HT : 80 1C 05
- Phone IMEI: 352488012939428
- Product Code: 252918158
- MCP NOR Flash ID: 00 01 2A 7E 2A 24 2A 00
- Chip(0): Spansion S29NS032J 32Mbit
Get Code from server ...Success!
- Net code: 40800869-25

TOOLS:-
Universal RJ45 Cabel For SMTi

SMTi RJ45 -1 4.8v
SMTi RJ45 -2 TDO
SMTi RJ45 -3 TDI
SMTi RJ45 -4 TX
SMTi RJ45 -5 RX
SMTi RJ45 -6 TMS
SMTi RJ45 -7 TCK
SMTi RJ45 -8 GND

ONLY

Must connecty cable to phone and Power on before connecting cable to box

HOW TO connect cable TO THE PHONE

connect RX TX AND ANY GND
IF YOU NEED TX - RX GO TO SUPPORT INFO TP AND ANY GND
unlock whitout the two resistors IAM MAKE IT

THX
gsminfo
DZStorm