Reactivate a Dead GD87 - GSM-Forum

knoccout · 09-25-2003, 09:53

yesterday i flashed my phone.. the display said "missing sectors"
and winmodo said "waiting for erase response..." 2 min went by and i went nervous cuz nuthin changed.. i thought it wouldnt had erased anything so i stopped the process.. then i saw my phone erasing sumthing and then missing sectors again.. i disconnected and put out the battery.. now itz all dead.. cant turn power on again..

i read all 9 pages of the pana forums but no solution.. does anyone know how i can make my phone work again ?!

PLEEEZE HELP !!!

Syed · 09-25-2003, 10:46

Change Flash IC or try to reprogram it on Labtool..(that is if u can find an adaptor for NEC flash used).

WBR
Syed

knoccout · 09-25-2003, 11:36

can i buy a new flash ic sumwhere..
sumone on anotha forum told me bout this procedure:
do u think this could work ?!

solution for phone with BGA or no BGA chip

you need :

- 1 dead phone and 1 worked phone
- hot air station and soldering station
- PC with cable with external power
- software use WinMoDo with main and language pack
- microscope (optional, but recomended)

Steps :

- desolder from bad phone flash chip
- desolder from good phone flash chip
- solder in BAD phone works flash chip
- connect good phone with cable to PC
- run WinMoDo with GANG mode
- starting upload
- when you see in LCD : Flash loader - disconnect cable from phone
- in display you see Flash loader and phone frezee
- phone in FLASHING MODE !!!!
- YOU NEED DESOLDERING FLASH CHIP FROM WORKED,
POWERED AND FREEZED in flash mode PHONE !!!!!!!!
CAREFULY !!!!!!!!!!!!!
- DESOLDERING GOOD FLASH CHIP from BAD phone (phone still avaible in flash mode)
- SOLDER BAD FLASH CHIP in BAD PHONE
- PHONE STILL in FLASH MODE
- connect phone with cable to computer
- press OK
- you see uploading process - erasing 7-10 minute and flashing
- :-)) smile

P.S. use Winmodo with option writing BOOT, MAIN and LP flash

WARNING !!!!

if you lost original flash chip , you lost eeprom area !!!!!!!!!!!!
and when you solder another flash chip, repeat repair procedure
and power on phone - phone no powered !!!

KATOUE · 09-25-2003, 15:50

- desolder from bad phone flash chip
- desolder from good phone flash chip

You will get 2 dead phones

Do not try this at home .

This procedures not for an amateurs.

knoccout · 09-25-2003, 16:10

so pleeze tell me anotha one...

gawish · 09-27-2003, 06:01

what'is going on

Mobile Lab · 09-27-2003, 12:58

No solution for Dead Gd87 during flashing .
change flash chip and lots other things .but phone still dead..
no solutions Yet .

Thanks n Regards

Crew · 09-27-2003, 13:00

hehe
solution exist

WBR
Crew

Mobile Lab · 09-27-2003, 13:13

@Crew
solution exist ????
but what and where ?

Thanks n Regards

PootaGsm · 09-27-2003, 15:48

lol @crew
Crew is the guy which have all solutions even he can alive any human .. he has its own solutions

Mobile Lab · 09-27-2003, 16:22

lolz @ PootaGsm

and all Crew solution just work for Crew not for else..

Thanks n Regards

garfieldpan · 09-29-2003, 14:54

wotever happens never ever disconnect the phone to the computer!!!!!

kazzup · 10-01-2003, 01:13

i had the same problem. i inserted my spare battery which was fully charged, started winmodo and it reflashed the phone. if still doesn't work goto kingmobilephone.co.uk they can help you

good luck

09-25-2003, 09:53	#1 (permalink)
knoccout Junior Member Join Date: Sep 2003 Posts: 11 Member: 40105 Status: Offline Thanks Meter: 0	Reactivate a Dead GD87 yesterday i flashed my phone.. the display said "missing sectors" and winmodo said "waiting for erase response..." 2 min went by and i went nervous cuz nuthin changed.. i thought it wouldnt had erased anything so i stopped the process.. then i saw my phone erasing sumthing and then missing sectors again.. i disconnected and put out the battery.. now itz all dead.. cant turn power on again.. i read all 9 pages of the pana forums but no solution.. does anyone know how i can make my phone work again ?! PLEEEZE HELP !!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A thought about dead GD87s...	TriMesh	Panasonic	4	12-15-2003 02:56
Sent Dead GD87 to panasonic	jammi	Panasonic	6	09-13-2003 11:30
Dead GD87	SiRoYa	Panasonic	14	09-01-2003 10:02
Dead GD87 GU87.	abcchoier	Panasonic	4	06-11-2003 22:38
dead gd87 after winmodo	Chawkiz_gsm	Panasonic	1	03-31-2003 15:50

09-25-2003, 10:46	#2 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	Change Flash IC or try to reprogram it on Labtool..(that is if u can find an adaptor for NEC flash used). WBR Syed

09-25-2003, 11:36	#3 (permalink)
knoccout Junior Member Join Date: Sep 2003 Posts: 11 Member: 40105 Status: Offline Thanks Meter: 0	can i buy a new flash ic sumwhere.. sumone on anotha forum told me bout this procedure: do u think this could work ?! solution for phone with BGA or no BGA chip you need : - 1 dead phone and 1 worked phone - hot air station and soldering station - PC with cable with external power - software use WinMoDo with main and language pack - microscope (optional, but recomended) Steps : - desolder from bad phone flash chip - desolder from good phone flash chip - solder in BAD phone works flash chip - connect good phone with cable to PC - run WinMoDo with GANG mode - starting upload - when you see in LCD : Flash loader - disconnect cable from phone - in display you see Flash loader and phone frezee - phone in FLASHING MODE !!!! - YOU NEED DESOLDERING FLASH CHIP FROM WORKED, POWERED AND FREEZED in flash mode PHONE !!!!!!!! CAREFULY !!!!!!!!!!!!! - DESOLDERING GOOD FLASH CHIP from BAD phone (phone still avaible in flash mode) - SOLDER BAD FLASH CHIP in BAD PHONE - PHONE STILL in FLASH MODE - connect phone with cable to computer - press OK - you see uploading process - erasing 7-10 minute and flashing - :-)) smile P.S. use Winmodo with option writing BOOT, MAIN and LP flash WARNING !!!! if you lost original flash chip , you lost eeprom area !!!!!!!!!!!! and when you solder another flash chip, repeat repair procedure and power on phone - phone no powered !!!

09-25-2003, 15:50	#4 (permalink)
KATOUE No Life Poster Join Date: Feb 2002 Location: UK Posts: 948 Member: 9732 Status: Offline Thanks Meter: 27	- desolder from bad phone flash chip - desolder from good phone flash chip You will get 2 dead phones Do not try this at home . This procedures not for an amateurs.

09-25-2003, 16:10	#5 (permalink)
knoccout Junior Member Join Date: Sep 2003 Posts: 11 Member: 40105 Status: Offline Thanks Meter: 0	so pleeze tell me anotha one...

09-27-2003, 06:01	#6 (permalink)
gawish Junior Member Join Date: Feb 2001 Location: P&G Posts: 19 Member: 3239 Status: Offline Thanks Meter: 0	what'is going on

09-27-2003, 12:58	#7 (permalink)
Mobile Lab No Life Poster Join Date: Nov 2002 Location: D U B A I Age: 45 Posts: 1,929 Member: 17651 Status: Offline Sonork: 100.81230 Thanks Meter: 318	No solution for Dead Gd87 during flashing . change flash chip and lots other things .but phone still dead.. no solutions Yet . Thanks n Regards

09-27-2003, 13:00	#8 (permalink)
Crew No Life Poster Join Date: May 2000 Location: Russia Moscow Age: 59 Posts: 2,109 Member: 1408 Status: Offline Thanks Meter: 39	hehe solution exist WBR Crew

09-27-2003, 13:13	#9 (permalink)
Mobile Lab No Life Poster Join Date: Nov 2002 Location: D U B A I Age: 45 Posts: 1,929 Member: 17651 Status: Offline Sonork: 100.81230 Thanks Meter: 318	@Crew solution exist ???? but what and where ? Thanks n Regards

09-27-2003, 15:48	#10 (permalink)
PootaGsm Freak Poster Join Date: Aug 2003 Posts: 148 Member: 38071 Status: Offline Thanks Meter: 0	lol @crew Crew is the guy which have all solutions even he can alive any human .. he has its own solutions

09-27-2003, 16:22	#11 (permalink)
Mobile Lab No Life Poster Join Date: Nov 2002 Location: D U B A I Age: 45 Posts: 1,929 Member: 17651 Status: Offline Sonork: 100.81230 Thanks Meter: 318	lolz @ PootaGsm and all Crew solution just work for Crew not for else.. Thanks n Regards

09-29-2003, 14:54	#12 (permalink)
garfieldpan Junior Member Join Date: Jun 2003 Posts: 14 Member: 32321 Status: Offline Thanks Meter: 0	wotever happens never ever disconnect the phone to the computer!!!!!

10-01-2003, 01:13	#13 (permalink)
kazzup Junior Member Join Date: Jul 2003 Location: west yorkshire, uk Posts: 2 Member: 35229 Status: Offline Thanks Meter: 0	i had the same problem. i inserted my spare battery which was fully charged, started winmodo and it reflashed the phone. if still doesn't work goto kingmobilephone.co.uk they can help you good luck