ALWAYS getting this error: ERROR: 11160001 ERROR: 30020061 - GSM-Forum

Sigma · 10-01-2007, 21:42

uid was MUCH more easyer to use !!!
i cannot unlock 1!! handset with this.
tried 6131,6280,6288,6300.

and im not a newbie, done so far muchmuch with uid.

what is this error???
ERROR: 11160001
ERROR: 30020061

MobileserviceNL · 10-01-2007, 21:57

1. Use stabilezed 5V power (or make modification on the box) see sticky posts
2. Watch where to put the GND crodidle ..very important

goodluck

The_Gorr · 10-01-2007, 22:22

i think first u have to give us more infos about how u tried to unlock these phones, and if u used charger or not

if u explain, we can understund ur problem and give u the solution

br

<= The_Gorr =>

Sigma · 10-01-2007, 22:35

phone turns off.
but tp is 100% shure good.

The_Gorr · 10-01-2007, 22:39

what about charger, u tryed unlock with or without it !!
if phone turn off this mean u need more power, so try using original charger like explained in the sticky, or try with full charger batterie, it will work 100%

br

<= The_Gorr =>

Quote:

Originally Posted by Dj_SiGma

phone turns off.
but tp is 100% shure good.

shaaker · 10-01-2007, 22:51

100% GND problem

br

**BB5box.org** · 10-01-2007, 23:01

Not enough power from your PC/Notebook USB port (most likely you are using an Notebook). Power supply box with STABILIZED 5v.
Put GND near CPU or Flash, and NOT on battery pin or at vibra!
Check this details as example:
http://www.bb5box.org/6280.jpg

Trooperx17 · 10-01-2007, 23:06

I've same problem but only with 1 or 2 6280..
and I Use the right GND... even with charger or not..

Sigma · 10-01-2007, 23:08

yeah. but my case is a little different then others.
because this is not my first bb5 box, and i dont know why doesnt it work??
same method, isnt it??
im using the same LAPTOP as with dejan or UID box...
and they worked perfect...

**BB5box.org** · 10-01-2007, 23:10

Quote:

Originally Posted by Dj_SiGma

yeah. but my case is a little different then others.
because this is not my first bb5 box, and i dont know why doesnt it work??
same method, isnt it??
im using the same LAPTOP as with dejan or UID box...
and they worked perfect...

Just do as I said and all will work well. There is some differences in required power supply (e.g. our box have more chips, smartcard, 8 leds, ...) Is so hard?

Sigma · 10-01-2007, 23:16

oh. of course im giving it +5v.
i installed that Lm.. regulator stuff inside. (not the same, but 5.0v, 850ma one)
no killed phones, so it works perfect.

this is another one:
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.

p.s: only 1!! 6131 is ok till now.... so i dont get it.

Trooperx17 · 10-01-2007, 23:24

this is bad tp.. man...

**BB5box.org** · 10-01-2007, 23:25

Can you be more clear? What phone give you that?

Sigma · 10-01-2007, 23:31

6280,6300,6234.............

Sigma · 10-01-2007, 23:50

i am not shure this regulator is good.

i should mesure 5.0V on the left side- left side of the 2 diodes???

(my acp-12 is 7.5V !!!, interresting. its original nokia....)

10-01-2007, 21:42	#1 (permalink)
Sigma No Life Poster Join Date: Sep 2003 Age: 38 Posts: 882 Member: 38980 Status: Offline Sonork: 100.84054 Thanks Meter: 124	ALWAYS getting this error: ERROR: 11160001 ERROR: 30020061 uid was MUCH more easyer to use !!! i cannot unlock 1!! handset with this. tried 6131,6280,6288,6300. and im not a newbie, done so far muchmuch with uid. what is this error??? ERROR: 11160001 ERROR: 30020061

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hello, i always get this error in optiflash	ashvin	Trident/AGERE Platform	0	06-20-2006 17:39
i always get this error when flashing a nokia 6630,WHY???	SicilianBoy	Universalbox	7	06-19-2006 03:01
ALWAYS GET THIS PROBLEM AFTER REPAIRING !!!	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	05-10-2001 19:25

10-01-2007, 21:57	#2 (permalink)
MobileserviceNL Freak Poster Join Date: Nov 2005 Posts: 163 Member: 200188 Status: Offline Thanks Meter: 1	1. Use stabilezed 5V power (or make modification on the box) see sticky posts 2. Watch where to put the GND crodidle ..very important goodluck

10-01-2007, 22:22	#3 (permalink)
The_Gorr No Life Poster Join Date: May 2005 Location: Tunisia Age: 46 Posts: 14,198 Member: 145648 Status: Offline Sonork: 100.100487 The_Gorr Thanks Meter: 23,034	i think first u have to give us more infos about how u tried to unlock these phones, and if u used charger or not if u explain, we can understund ur problem and give u the solution br <= The_Gorr =>

10-01-2007, 22:35	#4 (permalink)
Sigma No Life Poster Join Date: Sep 2003 Age: 38 Posts: 882 Member: 38980 Status: Offline Sonork: 100.84054 Thanks Meter: 124	phone turns off. but tp is 100% shure good.

10-01-2007, 22:51	#6 (permalink)
shaaker No Life Poster Join Date: Mar 2003 Location: One step before you ;) Age: 42 Posts: 1,599 Member: 23695 Status: Offline Sonork: 100.64383 Thanks Meter: 12	100% GND problem br

10-01-2007, 23:01	#7 (permalink)
BB5box.org Product Manager Join Date: Sep 2007 Posts: 886 Member: 588059 Status: Offline Thanks Meter: 47	Not enough power from your PC/Notebook USB port (most likely you are using an Notebook). Power supply box with STABILIZED 5v. Put GND near CPU or Flash, and NOT on battery pin or at vibra! Check this details as example: http://www.bb5box.org/6280.jpg

10-01-2007, 23:06	#8 (permalink)
Trooperx17 No Life Poster Join Date: Dec 2005 Posts: 660 Member: 213638 Status: Offline Thanks Meter: 77	I've same problem but only with 1 or 2 6280.. and I Use the right GND... even with charger or not..

10-01-2007, 23:08	#9 (permalink)
Sigma No Life Poster Join Date: Sep 2003 Age: 38 Posts: 882 Member: 38980 Status: Offline Sonork: 100.84054 Thanks Meter: 124	yeah. but my case is a little different then others. because this is not my first bb5 box, and i dont know why doesnt it work?? same method, isnt it?? im using the same LAPTOP as with dejan or UID box... and they worked perfect...

10-01-2007, 23:16	#11 (permalink)
Sigma No Life Poster Join Date: Sep 2003 Age: 38 Posts: 882 Member: 38980 Status: Offline Sonork: 100.84054 Thanks Meter: 124	oh. of course im giving it +5v. i installed that Lm.. regulator stuff inside. (not the same, but 5.0v, 850ma one) no killed phones, so it works perfect. this is another one: Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 08 Unlock fail. Please try again. p.s: only 1!! 6131 is ok till now.... so i dont get it.

10-01-2007, 23:24	#12 (permalink)
Trooperx17 No Life Poster Join Date: Dec 2005 Posts: 660 Member: 213638 Status: Offline Thanks Meter: 77	this is bad tp.. man...

10-01-2007, 23:25	#13 (permalink)
BB5box.org Product Manager Join Date: Sep 2007 Posts: 886 Member: 588059 Status: Offline Thanks Meter: 47	Can you be more clear? What phone give you that?

10-01-2007, 23:31	#14 (permalink)
Sigma No Life Poster Join Date: Sep 2003 Age: 38 Posts: 882 Member: 38980 Status: Offline Sonork: 100.84054 Thanks Meter: 124	6280,6300,6234.............

10-01-2007, 23:50	#15 (permalink)
Sigma No Life Poster Join Date: Sep 2003 Age: 38 Posts: 882 Member: 38980 Status: Offline Sonork: 100.84054 Thanks Meter: 124	i am not shure this regulator is good. i should mesure 5.0V on the left side- left side of the 2 diodes??? (my acp-12 is 7.5V !!!, interresting. its original nokia....)