read not complet with mc tool ??? - GSM-Forum

humayun · 03-11-2008, 12:56

Hi too all members i have some problem with my MCTOOL this toool is working soo excelent but if i read flash file any fone so it stop is reading 1% 20% 40% not read to complet i send u screen shop than***

mc1.JPG

humayun · 03-11-2008, 14:02

here is another mobile log

we have try to read another modle

Quote:

> Cyberflex Access e-gate 32K
> Box S/N :----------
> Box Port detected on COM-9
> Box Version : V1.0 - Dec 02 2007
> Current Box settings:
> RX: 9 TX: 6 GND: 1,14 VCC: 0
> Ready to use...

[ 05:53:25 ] [--- Operation Started ---]
[ 05:53:25 ] Detecting power pins...
[ 05:53:28 ] Detected GND : 1,14
[ 05:53:30 ] Searching for pinout...
[ 05:53:33 ] Pinout detected OK!
[ 05:53:33 ] RX : 6 TX : 9
[ 05:53:33 ] Writing settings to Box...
[ 05:53:36 ] Settings has been written OK!
[ 05:53:36 ] [--- Operation Successful! ---]

[ 05:53:53 ] [--- Operation Started ---]
[ 05:53:54 ] Press and keep power ON button...
[ 05:53:55 ] Phone detected : MTK CPU
[ 05:53:55 ] Preparing phone for boot...
[ 05:53:58 ] Release power ON button now!
[ 05:53:58 ] CPU Platform : 8A02-6228
[ 05:54:00 ] Loading bootloader...
[ 05:54:07 ] Bootloader loaded OK!
[ 05:54:07 ] Getting flash chip details...
[ 05:54:09 ] Flash chip ID : 00AD00F1 [0080001D]
[ 05:54:09 ] Chip Name : HYNIX
[ 05:54:09 ] Flash chip size : [ 0x04000000 - 64MB ]
[ 05:54:09 ] Chip block (0x00) : 4000 * 1000
[ 05:54:09 ] Setting parameters...
[ 05:54:10 ] Initializing phone`s RAM...
[ 05:54:12 ] RAM initialize OK!
[ 05:54:13 ] Decryption info : 04200000-64
[ 05:54:13 ] Reading flash memory...
[ 05:54:14 ] RomCode offset : 0x00020000 .....
stoped 2%

kwamena · 05-30-2008, 02:54

please were you able to solve your problem? i have the same problem and support does not respond to my problem.
MC-TOOL support where are you, i have never been able to read flash ever since i bought mc-tool. please help

Andra · 05-30-2008, 08:39

it's cos prolific not support read at 9120000

if mctool can change baudrate to 48 or less may can read from phone

nasermmx · 06-02-2008, 20:47

sir your phone is short /see your short indiketer red light blinking

03-11-2008, 12:56	#1 (permalink)
humayun Freak Poster Join Date: Aug 2005 Location: PAKISTAN HYDERABAD Age: 40 Posts: 186 Member: 173592 Status: Offline Thanks Meter: 30	read not complet with mc tool ??? Hi too all members i have some problem with my MCTOOL this toool is working soo excelent but if i read flash file any fone so it stop is reading 1% 20% 40% not read to complet i send u screen shop than*** mc1.JPG

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I have a problem with MC TOOL	mmateiri	MC-Tool	7	11-05-2008 11:28
spreadrum cpu not supported in mc tool	gs cell	MC-Tool	3	10-02-2008 16:41
Another New problem with MC-tool Box	lagunahuang	MC-Tool	1	10-02-2008 09:12
can i use pad finder with mc tool box...	digitized	PadFinder box	1	06-21-2008 10:51
i808 can not flash with mc tool ???	humayun	MC-Tool	3	03-30-2008 12:20

05-30-2008, 02:54	#3 (permalink)
kwamena Freak Poster Join Date: Nov 2005 Location: Ghana Age: 40 Posts: 205 Member: 196459 Status: Offline Thanks Meter: 8	please were you able to solve your problem? i have the same problem and support does not respond to my problem. MC-TOOL support where are you, i have never been able to read flash ever since i bought mc-tool. please help

05-30-2008, 08:39	#4 (permalink)
Andra No Life Poster Join Date: Feb 2005 Location: AD Posts: 4,665 Member: 976728 Status: Offline Sonork: 1589709 Thanks Meter: 4,775	it's cos prolific not support read at 9120000 if mctool can change baudrate to 48 or less may can read from phone

06-02-2008, 20:47	#5 (permalink)
nasermmx Freak Poster Join Date: Feb 2008 Posts: 358 Member: 700012 Status: Offline Thanks Meter: 23	sir your phone is short /see your short indiketer red light blinking