help with e65

[lusomaco]

i have try unlock e65 and nothing

JAF version 1.98.57
Detected PKEY: 9000FF7C
Card life counter: 97.64%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Programas\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Programas\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Programas\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Programas\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
Failed! Aborting! IMEI
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 2.0615.30
13-09-07
RM-208
(c) Nokia.
HW version: 0810
PCI version:
RFIC version:  17141715
DSP version: A06w14PB_07w32
Retu version: 15
Tahvo version: 22
Production serial number: SCN712868
Product code: 0563403
Module code:
Basic production code: 0560030
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 358631xxxxxxxxx
IMEI spare to net: 3A 85 36 01 01 07 14 08
IMEI SV to net: 33 85 36 01 01 07 14 28 F5

LOCK STATUS:

CONFIG KEY: 0100000000000000
PROVIDER KEY: 2680600000000000
Provider: TMN;Portugal
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 26806F
Block 2:
Lock 1: CLOSED -> Lock Data: 26806F

Searching for saved ini...
Checking for file C:\Programas\ODEON\JAF\JAF_RM-208.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0563403

FILES SET FOR FLASHING:
MCU Flash file: C:\Programas\Nokia\Phoenix\Products\RM-208\rm208_m128_h20_ka_prod_106331801_c00_combined. bin
PPM Flash file: C:\Programas\Nokia\Phoenix\Products\RM-208\rm208_m128_h20_ka_prod_106331801_v01_variant.b in
CNT Flash file: C:\Programas\Nokia\Phoenix\Products\RM-208\rm208_cp_2.0.fpsx
APE Variant file: NONE
Languages in ppm: English,French,German,Italian,Spanish,Portuguese
Done!
Backup simlock data first...
Setting local mode...
Reading IMEI...
Backup already done, skiping...
Detecting phone...
Reading simlock...

LOCK STATUS:

CONFIG KEY: 0100000000000000
PROVIDER KEY: 2680600000000000
Provider: TMN;Portugal
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 26806F
Block 2:
Lock 1: CLOSED -> Lock Data: 26806F

Reading phone...Type: RM-208, Ver: 2.0615.30
Reading imei...
Imei: 3586310xxxxxxxx
Reading HW ID...0810
Found general data...
Waiting for TP confirmation...................................... ...........Sending code...
Communication lost... repower the phone and try again!




some tips?
thanks

[hawks007]

just keep trying and use easy tp

good luck

[humb11luis]

It´s a trick...


Communication lost... repower the phone and try again!

Normally just change the GND to near the RAP or directly to conection cable board.

and you i´ll see that error dosen`t show again.

and if haven´t help then change the wire and plug on TP cable.

[radez]

Remove capasitor/s near TPs BR As I remember clock touches to ground removing capasitors makes unlocking much easier

[humb11luis]

i don´t advise unless you don´t have problem in removing and put it again.

just try and try ...

and sometimes is better to close Jaf program and start again all that you are doing.
is my best advise....