*** Important ! Microbox EASY hardware Correction !! You need to make it !!! ***

[sauravgoyal06]

sir after open the box warranty is valid or not

[FU_Too]

Originally Posted by kasper17

this is my pcb i check this 2 pins and they are not connected . What is this black element over them ??? Must I connect these two pins ,because i dont know what function has this black element???

They are Jumper sockets miy microbox has same.

@ Julvir
Would it be suitable to just put jumper (bent wire) in appropiate place as it seems my board had already provisioned for this or is it essential that it ibe soldered?

[gsm9l]

Originally Posted by sauravgoyal06

sir after open the box warranty is valid or not

Answer is here if you think you're not able to do this jumper right ask your reseller to do it for you. http://forum.gsmhosting.com/vbb/7943667-post29.html

WBR,
gsm9l

[khurram6230]

For what problem we should make this jumper please explain sir

[gsm9l]

Originally Posted by khurram6230

For what problem we should make this jumper please explain sir

It was said many times it improves communication.

WBR,
gsm9l

[mahdy4]

Originally Posted by bebiloku

done .but for what this ,i have many years with my box ,never have problem with it?

i need to know to <<<<<<<<<>>>>>>>>>>>>

[mahdy4]

Originally Posted by julvir

Warranty is managed by our direct resellers ..

we actualy not give 6 month or 1 year , we give warranty and not look at what time was sold the box , as u can see we have very very rare HW problem and box get never faulty , maybe 0,1% to 0,2% of box only

so , i dont think will be a problem

BR

but why?
my box work fin without any problems
can you till us .
why?

[gsm9l]

It will improve box communications no matter you can't see bites how they are "jumping" there and how fast but they will "jump" more stable from box to cellphone.

WBR,
gsm9l

[saeed mumi]

very easy ,but why to do this

[gsm9l]

This answer is one post upper. Should I repeat this over and over again for everyone who is asking?

WBR,
gsm9l

[IMET.BD]

Originally Posted by NKhan_Gsm

I have bought My Microbox 2 year ago Should I make this modification too?



WBR

i bougt micro-box when its born.but have comunication problem.sometime box disconnect when try rj-45 port.

after this messege i open my box and soldered.now box work perfect.

[IMET.BD]

Originally Posted by khurram6230

For what problem we should make this jumper please explain sir

when u use usb operation u always fine

but when use rj-45 port its have some problem in comunication.so soldered it for beter result

[gsm9l]

All info is in this thread - CLOSED.

WBR,
gsm9l