E2120, E2120i, E2120B - 100% restart solution!!!

[EMAMIBEL]

thank you for tem z3x box

[romeo_1]

very good work nice solution. thank you very very much sir very good

[saeedullah_khan]

(1)repair eepum
(2)write full flash
(3)repair imei
(4)unlock
set is 100% proper work
this is my experience.if u have any experience please shere this tread.

[CHEZRACHID]

Originally Posted by saeedullah_khan

(1)repair eepum
(2)write full flash
(3)repair imei
(4)unlock
set is 100% proper work
this is my experience.if u have any experience please shere this tread.

i've donne all this before without succes. There is no solution brother, just listen to masters opinions: change PCB = bye new phone,

[OHIIM]

i have try 10 pic and it works by this solution..... open the phone remove imei cover and hot or heat the board and try flash it it will work for u 100%.

[pinku kumar]

USE UFS HWK

USE SAMSUNG V2.0.7

SELECT E2120i & SELECT THREE FILE BIN+TFS+CSC

USE THIS FILE: E2120iDDJE1+E2120iDDJE1_CSC

AFTER THEN WRITE FLASH,FLASHING COMPLITE YOUR PHONE 100% OK


IS IT FAKE POST IF YES, THAN WHAT ARE DOING Z3X TEAM .WE KNOW THAT Z3X=ALL SOLUTION OF SAMSUNG

[xerraco]

If SW wont work then thats a Solution, yes 100% fix your problem.

[saleem5001]

thats wrong method pcb changing not solution

[singletch]

Whats The Use Of Changing PCB

Then How Long The New Pcb Works

Need Some Solution

I think Its Not Correct Solution

[IBMOBILES]

hi , i would like to say that this can easily repair by nspro box as we repairing mostly 10 to 15 phones daily by file uploaded by Dr. Nabil , just full flash selecting only bin file and problem solved

Please check here

[benny Haraba]

I posted this solution 2momths ago check threads by beny Haraba to go straight to the solution first erase and then full flash without erase the problem not solved ok

[benny Haraba]

REPAIRED RESTARTING E2120

YOU MUST FIRST ERASE AND FULL FLASH HERE ARE THE LOGS


Selected model: E2120
Selected com port: COM13
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Timeout connect phone
Send loaders - fail
Elapsed time: 42 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Selected model: E2120
Selected com port: COM13
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Timeout connect phone
Send loaders - fail
Elapsed time: 41 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Selected model: E2120
Selected com port: COM13
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Start TFS format... OK
Start NOR flash
Timeout sum flash
Send NOR - fail
Elapsed time: 590 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Selected model: E2120
Selected com port: COM13
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Erase - ok
Elapsed time: 113 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Selected model: E2120
Selected com port: COM13
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Start TFS format... OK
Start NOR flash
NOR flash - ok
Start Flash TFS
Download - ok
Elapsed time: 703 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------

[compue]

Originally Posted by blang

E2120, E2120i, E2120B - 100% restart solution!!!

change pcb and phone will work 100%.
other solution not exist.

If someone have other solution you can post only in this tread!!!

Keep z3x section clear and easy for searching if someone need real solutiion and real help. not waste time.

if i will see 1more post in z3x section about this problem - tread poster will be blocked from z3x section forever.

mr blang. really very sorry to say that ur thinking is negative, everything is possible so i and more like me think solution is there but we can't go there or we are not able to find at this time solution of these wonderful sets created by samsung company and these sets defeted nokia 3110 blinkink problem, and they are creating records after software blinking case. be positive and i yet think solution may be.

[K-ONE CELL]

tnks u frymuach for to sll.......................

[annaii_com]

lot of thanks zx3 solution.