Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1100 - GSM-Forum

ghacks · 07-16-2016, 21:42

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore.
7. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Write CERT
Selected model: GT-I9500
Software version: 26.0

Checking certificate file... OK
KEY ID: 0833
Waiting ADB device... OK
Reading phone info...
Model: GT-I9500
Android version: 4.3
Product code: Not Active
Phone version: I9500XXUBMG9
PDA version: I9500UBUEMK1
CSC version: I9500JDIEMK1
CSC country code: JAMAICA
CSC sales code: JDI
HW version: REV__
Phone S/N: RV1D708QQFR
Modem board: XMM6360
RF cal date: Unknown
IMEI: 004999010640000
Checking Super user right... true
Reading nv data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.26.0

AhmetSuat · 07-17-2016, 11:56

Selected model: I9506
Selected port: COM3 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9506
Android version: 4.3
Product code: GT-I9506ZKASIN
Phone version: I9506XXUBMK7
PDA version: I9506XXUBNA2
CSC version: I9506OLBBNA1
IMEI: 358************
Phone S/N: RF1DB0W3ECK
Checking Super user right... true
Backuping MMCBLK... OK
Writing data to phone... OK
Rebooting phone... OK
Waiting phone... OK
Reading phone info...
Model: GT-I9506
Android version: 4.3
Product code: Not Active
Phone version: I9506XXUBMK7
PDA version: I9506XXUBNA2
CSC version: I9506OLBBNA1
IMEI: 448************
Phone S/N: RF1DB0W3ECK
Bypass MSL... OK
Repairing... OK
Reseting... OK
Repair done
Done with Samsung Tool v.18.8

ibrahimtr · 07-17-2016, 18:50

GT-S5830D UNLOCK DONE

Operation: Read Codes
Selected model: GT-S5830D
Selected port: COM41 SAMSUNG Android USB Diagnostic Serial Port (WDM)
Software version: 26.0

Checking phone at COM41
Reading phone info... OK
Model: GT-S5830D
Country code: Ä³³ª´Ù / TLS
Cal date: 2011-09-15
Factory SW: S5830DTLKI4_TLSKI4
Unique number: 23570000252628
Memory phone: KAT007012B(S5830)
Phone S/N: R21C960JTM
PDA/CSC version: S5830DTLKI4/S5830DTLSKI4
Phone version: S5830DTLKI4
Phone HW: REV1.0
Cal date: 2012.09.24
Reading IMEI... OK
IMEI: 35907XXXXXXXXXX
Reseting MSL... OK
Bypass MSL... OK
Reading codes... OK
Freeze code: 06291863
NET lock: 25092408
Sub lock: 00000000
SP lock: 25092408
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.26.0

nadirghazi · 07-18-2016, 05:43

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore.
7. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Write CERT
Selected model: SM-G928A
Software version: 26.0

Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G928A
Android version: 5.1.1
Product code: SM4G928AZDAATT
Phone version: G928AUCU1AOGG
PDA version: G928AUCU1AOGG
CSC version: G928AATT1AOGG
CSC country code: USA
CSC sales code: ATT
HW version: REV0.1
Phone S/N: R38G80V1LLF
Modem board: SHANNON333
RF cal date: 20150828
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 48 A6 DD 4E 54 05 00 00 00 00 00 00 00 00 00 00
Initialization AT RIL...
AT RIL stopped, restarting...
Checking for compatible phone and cert
Phone KEY ID: 0784
Checking certificate file... OK
KEY ID: 0784
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Write CERT done

Done with Samsung Tool PRO v.26.0

nadirghazi · 07-18-2016, 05:59

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore.
7. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Write CERT
Selected model: SM-N920A
Software version: 26.0

Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-N920A
Android version: 5.1.1
Product code: SM2N920AZKAATT
Phone version: N920AUCU2APB2
PDA version: N920AUCU2APB2
CSC version: N920AATT2APB2
CSC country code: USA
CSC sales code: ATT
HW version: REV1.0
Phone S/N: RF8H30AJK1J
Modem board: SHANNON333
RF cal date: 20160303
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 68 F0 BB ED D6 07 00 00 00 00 00 00 00 00 00 00
Initialization AT RIL...
AT RIL stopped, restarting...
Checking for compatible phone and cert
Phone KEY ID: 0448
Checking certificate file... OK
KEY ID: 0448
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Write CERT done

Done with Samsung Tool PRO v.26.0

Tanha0321 · 07-18-2016, 11:07

Code:

Operation: Patch Certificate
Selected model: GT-N7100
Software version: 25.9

Waiting ADB device... OK
Reading phone info...
Model: GT-N7100
Android version: 4.3
Product code: Not Active
Phone version: N7100BUUEMK2
PDA version: N7100XXUEMK9
CSC version: N7100VFGEMK5
CSC country code: Germany
CSC sales code: VD2
HW version: Unknown
Phone S/N: 00000000000
Modem board: XMM6262
RF cal date: Unknown
IMEI: 356012354203874
Checking Super user right... true
Reading modem... OK
Patching modem... OK
Writing modem... OK
Reading kernel... OK
Patching kernel... OK
Writing kernel... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.25.9

ibrahimtr · 07-18-2016, 12:16

B1130B READ CODES DONE

Selected model: E1130B
Selected com port: COM11
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone SW: E1130BAFJA1
Phone CSC: E1130BFTMJA2
Phone BT ADDR: 101D-C0-C9877D
Phone IMEI: 3581XXXXXXXXX
Deactivated MSL - TRUE
[FREZEE]: 71631020
[NET Lock]: 08159260
[Subset Lock]: 00000000
[SP Lock]: 00000000
[CP Lock]: 00000000
[Sim Lock]: 00000000
[Phone Lock]: 00000000
Read info - ok
Elapsed time: 127 second, sw ver: 3.5.0040
------------------------------------------------------------

abdulhaq_majroh · 07-19-2016, 05:30

Operation: Unlock
Selected model: SM-J500FN
Selected port: COM78 SAMSUNG Mobile USB Serial Port
Software version: 25.9

Reading phone info...
Reading IMEI... OK
IMEI: 358990079267183
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.25.9

A4L · 07-19-2016, 16:33

Success with z3x. The "other" tool failed on this one.

Operation: Read CERT
Selected model: SM-G930W8
Software version: 26.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G930W8
Android version: 6.0.1
Product code: SM-G930WZSARWC
Phone version: G930W8VLU1APD3
PDA version: G930W8VLU1APD3
CSC version: G930W8OYA1APD3
CSC country code: Canada
CSC sales code: RWC
HW version: REV0.2
Phone S/N: R58xxxxxxxxx
Modem board: SHANNON335
RF cal date: 20160612
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 5A 21 33 DB E5 E4 96 9D FC 99 5A 7B 56 66 FB 87
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Certificate file saved to C:\Program Files\Z3X\Samsung\SamsungTool\backup\Cert\SM-G930W8_R58xxxxxxxxxx_356xxxxxxxxxxxxxx_19-7-2016_10-29-9.cert

Operation: Read Codes
Selected model: SM-G930W8
Software version: 26.0

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G930W8
Android version: 6.0.1
Product code: SM-G930WZSARWC
Phone version: G930W8VLU1APD3
PDA version: G930W8VLU1APD3
CSC version: G930W8OYA1APD3
CSC country code: Canada
CSC sales code: RWC
HW version: REV0.2
Phone S/N: R5xxxxxxxxxxx
Modem board: SHANNON335
RF cal date: 20160612
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 5A 21 33 DB E5 E4 96 9D FC 99 5A 7B 56 66 FB 87
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:13)
Freeze code: 52952505
NET lock: 70864163
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Tanha0321 · 07-19-2016, 16:44

Code:

Operation: Write CERT
Selected model: SM-J700H/DS
Software version: 26.0

Checking certificate file... OK
KEY ID: 0901
Waiting ADB device... OK
Reading phone info...
Model: SM-J700H
Android version: 5.1.1
Product code: 
Phone version: J700HXXU2APB7
PDA version: J700HXXU2APB7
CSC version: J700HOJV2APB7
CSC country code: PAKISTAN
CSC sales code: PAK
HW version: 
Phone S/N: 
Modem board: SHANNON310
RF cal date: 
IMEI: 
Checking Super user right... true
Reading nv data... OK
Checking NV data... OK OK
Rebooting phone... OK
Write CERT done

Done with Samsung Tool PRO v.26.0

grmcrkrs · 07-19-2016, 19:11

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose USB (or 'DM/DUN over HSIC').
4. Reboot phone.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SGH-I527
Selected port: COM18 SAMSUNG Mobile USB Serial Port
Software version: 26.0

Reading phone info...
Reading IMEI... OK
IMEI: 357742051739817
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.26.0

aslam870 · 07-19-2016, 19:37

Telcel always is complicated, but this model was very easy with Z3X.

Here is the log:

Operation: Unlock
Selected model: SM-G531H
Software version: 26.0

Searching Samsung modem... detected COM30
Reading phone info... OK
Model: SM-G531H
Version: G531HUBU0AOF2/G531HTCE0AOF2/G531HUBU0AOF2/G531HUBU0AOF2
Product code: SM-G531HZWATCE
Phone S/N: R51G90BKN0R
Imei: 352552071XXXXXX
Unique number: C5K13909F30E482
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.26.0

Best regards.......................aslam870

aslam870 · 07-19-2016, 20:55

Operation: Reset FRP/React/EE
Selected model: SM-G360T1
Software version: 26.0

Searching Samsung USB Flash Interface... detected COM7
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.26.0

Best regards..................aslam870

cellcare prasad · 07-20-2016, 08:16

SAMSUNG S7 EDGE FRP WITH OUT RISK WITH Z3X

bro
prasad

..::ALLDARZ::.. · 07-20-2016, 08:38

Samsung G900P Domestic Unlock Done by Z3x

Code:

  UNLOCK INSTRUCTIONS:
    Direct Unlock:   
  1. Phone must be powered on.
  2. Type *#0808# and select 'DM+MODEM+ADB'.
  3. Type *#9090# and choose 'DM/DUN over HSIC'.
  4. Reboot phone.
     Or use 'Activate Diag' function from 'Repair' tab.
  5. Connect USB cable, install drivers if needed.
  6. Select Samsung diagnostic port in port settings.
  7. Press 'Unlock' button.
    
    Domestic Unlock:
  1. Power on the phone.
  2. Enable 'USB debugging' in 'Settings'-'Developer options',
     tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  5. Select device in ADB settings.
  6. Press 'Unlock Domestic' button. 

Operation: Unlock SPRNT
Selected model: SM-G900P
Selected port: 
Software version: 25.9

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G900P
Android version: 5.0
Product code: Not Active
Phone version: G900PVPU3BOK4
PDA version: G900PVPU3BOK4
CSC version: G900PSPT3BOK4
CSC country code: USA
CSC sales code: SPR
HW version: G900P.04
Phone S/N: 00000000000
Modem board: MSM8974PRO
RF cal date: 2014.06.16
IMEI: 
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.9

07-17-2016, 11:56	#16487 (permalink)
AhmetSuat Freak Poster Join Date: Oct 2015 Posts: 371 Member: 2478777 Status: Offline Sonork: 1669951 Thanks Meter: 103	gt-i9506 imei repair Selected model: I9506 Selected port: COM3 Z3X BOX Serial Port Selected port speed: 115200 Searching ADB device... OK Reading phone info... Model: GT-I9506 Android version: 4.3 Product code: GT-I9506ZKASIN Phone version: I9506XXUBMK7 PDA version: I9506XXUBNA2 CSC version: I9506OLBBNA1 IMEI: 358********** Phone S/N: RF1DB0W3ECK Checking Super user right... true Backuping MMCBLK... OK Writing data to phone... OK Rebooting phone... OK Waiting phone... OK Reading phone info... Model: GT-I9506 Android version: 4.3 Product code: Not Active Phone version: I9506XXUBMK7 PDA version: I9506XXUBNA2 CSC version: I9506OLBBNA1 IMEI: 448********** Phone S/N: RF1DB0W3ECK Bypass MSL... OK Repairing... OK Reseting... OK Repair done Done with Samsung Tool v.18.8

07-19-2016, 16:33	#16494 (permalink)
A4L No Life Poster Join Date: Aug 2013 Location: Somewhere on earth Posts: 629 Member: 2014742 Status: Offline Thanks Meter: 167	Samsung S7 G930W8 Read Cert + Unlock Success with z3x. The "other" tool failed on this one. Operation: Read CERT Selected model: SM-G930W8 Software version: 26.0 Waiting ADB device... OK Reading phone info... Model: SM-G930W8 Android version: 6.0.1 Product code: SM-G930WZSARWC Phone version: G930W8VLU1APD3 PDA version: G930W8VLU1APD3 CSC version: G930W8OYA1APD3 CSC country code: Canada CSC sales code: RWC HW version: REV0.2 Phone S/N: R58xxxxxxxxx Modem board: SHANNON335 RF cal date: 20160612 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 5A 21 33 DB E5 E4 96 9D FC 99 5A 7B 56 66 FB 87 Reading nv data... OK Checking NV data... OK Calculating... OK Certificate file saved to C:\Program Files\Z3X\Samsung\SamsungTool\backup\Cert\SM-G930W8_R58xxxxxxxxxx_356xxxxxxxxxxxxxx_19-7-2016_10-29-9.cert Operation: Read Codes Selected model: SM-G930W8 Software version: 26.0 Checking hash file... OK Waiting ADB device... OK Reading phone info... Model: SM-G930W8 Android version: 6.0.1 Product code: SM-G930WZSARWC Phone version: G930W8VLU1APD3 PDA version: G930W8VLU1APD3 CSC version: G930W8OYA1APD3 CSC country code: Canada CSC sales code: RWC HW version: REV0.2 Phone S/N: R5xxxxxxxxxxx Modem board: SHANNON335 RF cal date: 20160612 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 5A 21 33 DB E5 E4 96 9D FC 99 5A 7B 56 66 FB 87 Reading nv data... OK Checking NV data... OK Calculating... OK Please wait, calculating codes... OK (time - 00:00:13) Freeze code: 52952505 NET lock: 70864163 Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625#

07-19-2016, 19:37	#16497 (permalink)
aslam870 Freak Poster Join Date: Nov 2006 Location: in the Royal Palm Land.... Age: 49 Posts: 476 Member: 383033 Status: Offline Sonork: 100.1580642 Thanks Meter: 441	Samsung G531H TELCEL Mexico Direct Unlock Done without Root Telcel always is complicated, but this model was very easy with Z3X. Here is the log: Operation: Unlock Selected model: SM-G531H Software version: 26.0 Searching Samsung modem... detected COM30 Reading phone info... OK Model: SM-G531H Version: G531HUBU0AOF2/G531HTCE0AOF2/G531HUBU0AOF2/G531HUBU0AOF2 Product code: SM-G531HZWATCE Phone S/N: R51G90BKN0R Imei: 352552071XXXXXX Unique number: C5K13909F30E482 Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.26.0 Best regards.......................aslam870

07-20-2016, 08:16	#16499 (permalink)
cellcare prasad No Life Poster Join Date: Oct 2007 Location: VIZAG,A.P, INDIA Posts: 2,044 Member: 602547 Status: Offline Sonork: 100.1621466 Thanks Meter: 930	Samsung s7 edge frp with out risk with z3x SAMSUNG S7 EDGE FRP WITH OUT RISK WITH Z3X bro prasad

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29

07-16-2016, 21:42	#16486 (permalink)
ghacks No Life Poster Join Date: Dec 2009 Location: *** Taste Good Age: 39 Posts: 4,066 Member: 1196914 Status: Offline** Sonork: 100.1667938 Thanks Meter: 1,645	BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read EFS' button to read backup or 'Write EFS' to restore. 6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore. 7. Press 'Write NV DATA' if you need to restore NV backup. Operation: Write CERT Selected model: GT-I9500 Software version: 26.0 Checking certificate file... OK KEY ID: 0833 Waiting ADB device... OK Reading phone info... Model: GT-I9500 Android version: 4.3 Product code: Not Active Phone version: I9500XXUBMG9 PDA version: I9500UBUEMK1 CSC version: I9500JDIEMK1 CSC country code: JAMAICA CSC sales code: JDI HW version: REV__ Phone S/N: RV1D708QQFR Modem board: XMM6360 RF cal date: Unknown IMEI: 004999010640000 Checking Super user right... true Reading nv data... OK Checking magic... OK Running zTool, please wait... OK Detected new type of security version 0 Calculating... OK Writing nv data... OK Rebooting phone... OK Write CERT done Done with Samsung Tool PRO v.26.0

07-17-2016, 18:50	#16488 (permalink)
ibrahimtr Freak Poster Join Date: Oct 2014 Location: algeria Age: 35 Posts: 161 Member: 2266626 Status: Offline Thanks Meter: 40	*GT-S5830D UNLOCK DONE* Operation: Read Codes Selected model: GT-S5830D Selected port: COM41 SAMSUNG Android USB Diagnostic Serial Port (WDM) Software version: 26.0 Checking phone at COM41 Reading phone info... OK Model: GT-S5830D Country code: Ä³³ª´Ù / TLS Cal date: 2011-09-15 Factory SW: S5830DTLKI4_TLSKI4 Unique number: 23570000252628 Memory phone: KAT007012B(S5830) Phone S/N: R21C960JTM PDA/CSC version: S5830DTLKI4/S5830DTLSKI4 Phone version: S5830DTLKI4 Phone HW: REV1.0 Cal date: 2012.09.24 Reading IMEI... OK IMEI: 35907XXXXXXXXXX Reseting MSL... OK Bypass MSL... OK Reading codes... OK Freeze code: 06291863 NET lock: 25092408 Sub lock: 00000000 SP lock: 25092408 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.26.0

07-18-2016, 05:43	#16489 (permalink)
nadirghazi No Life Poster Join Date: May 2008 Location: NC, USA Age: 36 Posts: 1,978 Member: 779665 Status: Offline Sonork: 100.1581784 Thanks Meter: 492	BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read EFS' button to read backup or 'Write EFS' to restore. 6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore. 7. Press 'Write NV DATA' if you need to restore NV backup. Operation: Write CERT Selected model: SM-G928A Software version: 26.0 Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G928A Android version: 5.1.1 Product code: SM4G928AZDAATT Phone version: G928AUCU1AOGG PDA version: G928AUCU1AOGG CSC version: G928AATT1AOGG CSC country code: USA CSC sales code: ATT HW version: REV0.1 Phone S/N: R38G80V1LLF Modem board: SHANNON333 RF cal date: 20150828 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 48 A6 DD 4E 54 05 00 00 00 00 00 00 00 00 00 00 Initialization AT RIL... AT RIL stopped, restarting... Checking for compatible phone and cert Phone KEY ID: 0784 Checking certificate file... OK KEY ID: 0784 Reading nv data... OK Checking NV data... OK Calculating... OK Writing nv data... OK Rebooting phone... OK Write CERT done Done with Samsung Tool PRO v.26.0

07-18-2016, 05:59	#16490 (permalink)
nadirghazi No Life Poster Join Date: May 2008 Location: NC, USA Age: 36 Posts: 1,978 Member: 779665 Status: Offline Sonork: 100.1581784 Thanks Meter: 492	BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read EFS' button to read backup or 'Write EFS' to restore. 6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore. 7. Press 'Write NV DATA' if you need to restore NV backup. Operation: Write CERT Selected model: SM-N920A Software version: 26.0 Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-N920A Android version: 5.1.1 Product code: SM2N920AZKAATT Phone version: N920AUCU2APB2 PDA version: N920AUCU2APB2 CSC version: N920AATT2APB2 CSC country code: USA CSC sales code: ATT HW version: REV1.0 Phone S/N: RF8H30AJK1J Modem board: SHANNON333 RF cal date: 20160303 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 68 F0 BB ED D6 07 00 00 00 00 00 00 00 00 00 00 Initialization AT RIL... AT RIL stopped, restarting... Checking for compatible phone and cert Phone KEY ID: 0448 Checking certificate file... OK KEY ID: 0448 Reading nv data... OK Checking NV data... OK Calculating... OK Writing nv data... OK Rebooting phone... OK Write CERT done Done with Samsung Tool PRO v.26.0

07-18-2016, 12:16	#16492 (permalink)
ibrahimtr Freak Poster Join Date: Oct 2014 Location: algeria Age: 35 Posts: 161 Member: 2266626 Status: Offline Thanks Meter: 40	*B1130B READ CODES DONE* Selected model: E1130B Selected com port: COM11 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone SW: E1130BAFJA1 Phone CSC: E1130BFTMJA2 Phone BT ADDR: 101D-C0-C9877D Phone IMEI: 3581XXXXXXXXX Deactivated MSL - TRUE [FREZEE]: 71631020 [NET Lock]: 08159260 [Subset Lock]: 00000000 [SP Lock]: 00000000 [CP Lock]: 00000000 [Sim Lock]: 00000000 [Phone Lock]: 00000000 Read info - ok Elapsed time: 127 second, sw ver: 3.5.0040 ------------------------------------------------------------

07-19-2016, 05:30	#16493 (permalink)
abdulhaq_majroh No Life Poster Join Date: Jun 2011 Location: Kabul City Afghanistan Age: 38 Posts: 746 Member: 1600947 Status: Offline Sonork: 100.1627298 Thanks Meter: 772	Operation: Unlock Selected model: SM-J500FN Selected port: COM78 SAMSUNG Mobile USB Serial Port Software version: 25.9 Reading phone info... Reading IMEI... OK IMEI: 358990079267183 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.25.9

07-19-2016, 19:11	#16496 (permalink)
grmcrkrs Freak Poster Join Date: Nov 2015 Location: Alabama, United States Age: 41 Posts: 143 Member: 2489757 Status: Offline Thanks Meter: 6	UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose USB (or 'DM/DUN over HSIC'). 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SGH-I527 Selected port: COM18 SAMSUNG Mobile USB Serial Port Software version: 26.0 Reading phone info... Reading IMEI... OK IMEI: 357742051739817 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.26.0

07-19-2016, 20:55	#16498 (permalink)
aslam870 Freak Poster Join Date: Nov 2006 Location: in the Royal Palm Land.... Age: 49 Posts: 476 Member: 383033 Status: Offline Sonork: 100.1580642 Thanks Meter: 441	Operation: Reset FRP/React/EE Selected model: SM-G360T1 Software version: 26.0 Searching Samsung USB Flash Interface... detected COM7 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... not supported Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.26.0 Best regards..................aslam870