Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1313 - GSM-Forum

souma_k · 01-03-2018, 16:20

Operation: Unlock
[ 1/3/2018 2:31:00 PM ] Selected model: SM-N950U
[ 1/3/2018 2:31:00 PM ] Selected port: COM52 SAMSUNG Mobile USB Serial Port
[ 1/3/2018 2:31:00 PM ] Software version: 30.2.2
[ 1/3/2018 2:31:00 PM ]
[ 1/3/2018 2:31:00 PM ] Checking Login and Password... OK
[ 1/3/2018 2:31:00 PM ] Ballance: 20 crd.
[ 1/3/2018 2:31:00 PM ] You have 20 credit(s) left. This operation takes 10 credits.Continue? Yes
[ 1/3/2018 2:31:00 PM ] Waiting ADB device... OK
[ 1/3/2018 2:31:00 PM ] Reading phone info...
[ 1/3/2018 2:31:00 PM ] Model: SM-N950U
[ 1/3/2018 2:31:00 PM ] Android version: 7.1.1
[ 1/3/2018 2:31:00 PM ] Product code: SM-N950UZKATMB
[ 1/3/2018 2:31:00 PM ] Phone version: N950USQU1AQH7
[ 1/3/2018 2:31:00 PM ] PDA version: N950USQU1AQH7
[ 1/3/2018 2:31:00 PM ] CSC version: N950UOYN1AQH7
[ 1/3/2018 2:31:00 PM ] CSC country code: USA
[ 1/3/2018 2:31:00 PM ] CSC sales code: TMB
[ 1/3/2018 2:31:00 PM ] HW version: REV1.0
[ 1/3/2018 2:31:00 PM ] Phone SN: R28Jxxxxxx
[ 1/3/2018 2:31:00 PM ] Chip name: MSM8998
[ 1/3/2018 2:31:00 PM ] Modem board: MSM8998
[ 1/3/2018 2:31:00 PM ] Security patch: 2017-08-01
[ 1/3/2018 2:31:00 PM ] RF cal date: 2017.08.31
[ 1/3/2018 2:31:00 PM ] IMEI: 358xxxxx
[ 1/3/2018 2:32:00 PM ] Rebooting phone... OK
[ 1/3/2018 2:32:00 PM ] Waiting ADB device... OK
[ 1/3/2018 2:32:00 PM ] Rebooting phone... OK
[ 1/3/2018 2:32:00 PM ] Waiting ADB device... OK
[ 1/3/2018 2:32:00 PM ] Waiting for device to become ready... OK
[ 1/3/2018 2:32:00 PM ] Initialization zTool... OK
[ 1/3/2018 2:32:00 PM ] Running zTool, please wait...
[ 1/3/2018 2:32:00 PM ] Start... OK
[ 1/3/2018 2:32:00 PM ] Initialization... OK
[ 1/3/2018 2:32:00 PM ] Generate and check client proof... OK
[ 1/3/2018 2:32:00 PM ] Verify proof by client... OK
[ 1/3/2018 2:32:00 PM ] Reading data from phone... OK
[ 1/3/2018 2:33:00 PM ] Rebooting to upload... OK
[ 1/3/2018 2:33:00 PM ] Searching Ramdump interface... COM53 detected
[ 1/3/2018 2:34:00 PM ] Reading data from phone... OK
[ 1/3/2018 2:34:00 PM ] Calculating... OK
[ 1/3/2018 2:34:00 PM ] Searching server... OK
[ 1/3/2018 2:34:00 PM ] Waiting for server answer... OK
[ 1/3/2018 2:34:00 PM ] Waiting ADB device... OK
[ 1/3/2018 2:34:00 PM ] Waiting for device to become ready... OK
[ 1/3/2018 2:34:00 PM ] Initialization zTool... OK
[ 1/3/2018 2:34:00 PM ] Running zTool, please wait...
[ 1/3/2018 2:34:00 PM ] Start... OK
[ 1/3/2018 2:34:00 PM ] Initialization... OK
[ 1/3/2018 2:35:00 PM ] Generate and check client proof... OK
[ 1/3/2018 2:35:00 PM ] Verify proof by client... OK
[ 1/3/2018 2:35:00 PM ] Reading data from phone... OK
[ 1/3/2018 2:35:00 PM ] Rebooting phone... OK
[ 1/3/2018 2:35:00 PM ] Unlock done

mobile mart · 01-03-2018, 16:33

Operation: Unlock
Selected model: SM-G920P
Software version: 30.2.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G920P
Android version: 7.0
Product code: Not Active
Phone version: G920PVPS4DQF1
PDA version: G920PVPS4DQF1
CSC version: G920PSPT4DQF1
CSC country code: USA
CSC sales code: SPR
HW version: G920P.02
Phone SN: 00000000000
Modem board: MDM9635M
Security patch: 2017-06-01
RF cal date: 2015.08.18
IMEI: 990005831
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.2.2

technomak · 01-03-2018, 19:48

Operation: Reset FRP UFS
Selected model: SM-G928F
Selected port: COM4 Z3X BOX Serial Port
Software version: 30.2

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM4 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G928F)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

qtouch · 01-04-2018, 00:11

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Unlock
Selected model: SM-G955U
Selected port: COM72 SAMSUNG Mobile USB Serial Port
Software version: 30.2.2

Checking Login and Password... OK
Ballance: 20 crd.
You have 20 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G955U
Android version: 7.0
Product code: SM2G955UZKATMB
Phone version: G955USQU1AQGA
PDA version: G955USQU1AQGA
CSC version: G955UOYN1AQGA
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone SN: R28J93Y7EQK
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-07-01
RF cal date: 2017.09.28
IMEI: 355980084943533
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM38 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.2.2

qtouch · 01-04-2018, 00:12

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will apear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Unlock
Selected model: SM-N950U
Selected port: COM75 SAMSUNG Mobile USB Serial Port
Software version: 30.2.2

Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 7.1.1
Product code: SM-N950UZKATMB
Phone version: N950USQU1AQI5
PDA version: N950USQU1AQI5
CSC version: N950UOYN1AQI5
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone SN: R28JA1RSWZE
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-08-01
RF cal date: 2017.10.19
IMEI: 358505084125042
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM38 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.2.2

wong edan · 01-04-2018, 07:37

bek__441 · 01-04-2018, 09:01

hello my phone
SM-j510fn riper imei support pleas

technomak · 01-04-2018, 11:31

Operation: Reset FRP UFS
Selected model: SM-G935F
Selected port: COM4 Z3X BOX Serial Port
Software version: 30.2

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM4 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G935F)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

iph0ne7 · 01-04-2018, 11:59

Operation: Unlock
Selected model: SM-G930P
Software version: 30.2.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G930P
Android version: 7.0
Product code: Not Active
Phone version: G930PVPU2APE1
PDA version: G930PVPU4BQH1
CSC version: G930PSPT4BQAA
CSC country code: USA
CSC sales code: SPR
HW version: REV0.6
Phone SN: 00000000000
Modem board: MSM8996
Security patch: 2017-08-01
RF cal date: 2016.09.28
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.2.2

diph001 · 01-04-2018, 12:45

Operation: Unlock
Selected model: SM-G530T
Software version: 30.2

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G530T
Android version: 5.1.1
Product code: SM2G530TZAATMB
Phone version: G530TUVS2AQE3
PDA version: G530TUVS2AQE3
CSC version: G530TTMB2AQE3
CSC country code: USA
CSC sales code: TMB
HW version: REV0.1
Phone SN: R28H10KADSE
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-05-01
RF cal date: 2016.01.07
IMEI: xxxxxxxxxxxxxxx
Checking Super user right... true
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM42 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.2

wsmobile · 01-04-2018, 14:30

Operation: Read Codes via Server
Selected model: SM-N950F
Software version: 30.2.2

Checking Login and Password... OK
Ballance: 23 crd.
You have 23 credit(s) left. This operation takes 5 credits.Continue? Yes
Searching Samsung modem... detected COM699
Reading phone info... OK
Model: SM-N950F
AP version: N950FXXU2BQKG
CSC version: N950FOXM2BQKG
CP version: N950FXXU2BQKG
Product code: PHN
Phone SN: R58J85T249A
Unique number: CE06171644B02323017E
Searching Samsung diag port... detected COM698
Reading phone info... OK
CP version: N950FXXU2BQKG
CP build: Nov 29 2017 10:27:46
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 53082936
NET lock: 42792502
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.30.2.2

Tanha0321 · 01-04-2018, 18:05

Code:

Operation: Reset FRP
Selected model: SM-J120A
Software version: 29.1

Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-J120A
Android version: 6.0.1
Product code: SM2J120AZKZATT
Phone version: J120AUCU2APJ2
PDA version: J120AUCU2APJ2
CSC version: J120AATT2APJ2
CSC country code: USA
CSC sales code: ATT
HW version: REV0.3
Phone SN: R58J10T5E8Z
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2016-10-01
RF cal date: 20170104
IMEI: 
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.1

Tanha0321 · 01-04-2018, 18:06

Code:

Operation: Reset FRP/React/EE
Selected model: SM-G361H/DS
Software version: 29.4

Searching Samsung USB Flash interface... COM8 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.29.4

Tanha0321 · 01-04-2018, 18:06

Code:

Operation: Reset FRP/React/EE
Selected model: SM-J500H
Software version: 29.6

Searching Samsung USB Flash interface... COM5 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.6

Tanha0321 · 01-04-2018, 18:10

Code:

Operation: Reset FRP
Selected model: SM-N920T
Selected port: COM68 Z3X BOX Serial Port
Software version: 30.1

Waiting ADB device... OK
Reading phone info...
Model: SM-N920T
Android version: 6.0.1
Product code: SM-N920TZKATMB
Phone version: N920TUVU4DPK6
PDA version: N920TUVU4DPK6
CSC version: N920TTMB4DPK6
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone SN: RF8G92LL6HH
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-11-01
RF cal date: 20150925
IMEI: 353756071742845
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.30.1

01-03-2018, 16:33	#19682 (permalink)
mobile mart No Life Poster Join Date: Feb 2008 Posts: 1,080 Member: 696136 Status: Offline Thanks Meter: 210	Samsung G920P 7.0 unlock done. Operation: Unlock Selected model: SM-G920P Software version: 30.2.2 Waiting ADB device... OK Reading phone info... Model: SM-G920P Android version: 7.0 Product code: Not Active Phone version: G920PVPS4DQF1 PDA version: G920PVPS4DQF1 CSC version: G920PSPT4DQF1 CSC country code: USA CSC sales code: SPR HW version: G920P.02 Phone SN: 00000000000 Modem board: MDM9635M Security patch: 2017-06-01 RF cal date: 2015.08.18 IMEI: 990005831 Writing AT RIL... OK Initialization AT RIL... root required Checking Super user right... true Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.2.2

01-03-2018, 19:48	#19683 (permalink)
technomak No Life Poster Join Date: Sep 2013 Location: KERALA, INDIA Posts: 1,053 Member: 2035802 Status: Offline Sonork: 100.1675827 Thanks Meter: 789	G928F UFS FRP unlocked with z3x box Operation: Reset FRP UFS Selected model: SM-G928F Selected port: COM4 Z3X BOX Serial Port Software version: 30.2 Hold 'Vol down' and press 'POWER ON' for 2-3 seconds Checking phone at COM4 OK Phone detected, do not release 'Vol down' Reading data from phone... OK Release 'Vol down' now Comparing selected model... match (G928F) Setup connection... OK Reseting FRP... OK Rebooting phone... OK Reset FRP done

01-04-2018, 07:37	#19686 (permalink)
wong edan No Life Poster Join Date: May 2008 Posts: 975 Member: 775581 Status: Offline Thanks Meter: 186	J1 mini unlocked

01-04-2018, 11:31	#19688 (permalink)
technomak No Life Poster Join Date: Sep 2013 Location: KERALA, INDIA Posts: 1,053 Member: 2035802 Status: Offline Sonork: 100.1675827 Thanks Meter: 789	G935f frp reset done by UFS method !! Operation: Reset FRP UFS Selected model: SM-G935F Selected port: COM4 Z3X BOX Serial Port Software version: 30.2 Hold 'Vol down' and press 'POWER ON' for 2-3 seconds Checking phone at COM4 OK Phone detected, do not release 'Vol down' Reading data from phone... OK Release 'Vol down' now Comparing selected model... match (G935F) Setup connection... OK Reseting FRP... OK Rebooting phone... OK Reset FRP done

01-04-2018, 12:45	#19690 (permalink)
diph001 Freak Poster Join Date: Jul 2014 Location: Haiti Posts: 258 Member: 2216186 Status: Offline Sonork: 100.1668130 Thanks Meter: 120	SM-G530T TMO App unlock done by Z3X Operation: Unlock Selected model: SM-G530T Software version: 30.2 Checking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G530T Android version: 5.1.1 Product code: SM2G530TZAATMB Phone version: G530TUVS2AQE3 PDA version: G530TUVS2AQE3 CSC version: G530TTMB2AQE3 CSC country code: USA CSC sales code: TMB HW version: REV0.1 Phone SN: R28H10KADSE Chip name: MSM8916 Modem board: MSM8916 Security patch: 2017-05-01 RF cal date: 2016.01.07 IMEI: xxxxxxxxxxxxxxx Checking Super user right... true Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM42 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.2

01-04-2018, 00:11	#19684 (permalink)
qtouch Freak Poster Join Date: Nov 2006 Location: NJ, USA Posts: 454 Member: 399404 Status: Offline Thanks Meter: 70	UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Type #0808# and select 'DM+ACM+ADB'. 3. Run dialer and type #0*# (service mode will apear). 4. Connect the phone to USB cable, choose correct COM port in port settings. 5. Press 'Unlock' button. 6. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-G955U Selected port: COM72 SAMSUNG Mobile USB Serial Port Software version: 30.2.2 Checking Login and Password... OK Ballance: 20 crd. You have 20 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G955U Android version: 7.0 Product code: SM2G955UZKATMB Phone version: G955USQU1AQGA PDA version: G955USQU1AQGA CSC version: G955UOYN1AQGA CSC country code: USA CSC sales code: TMB HW version: REV1.0 Phone SN: R28J93Y7EQK Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-07-01 RF cal date: 2017.09.28 IMEI: 355980084943533 Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM38 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.2.2

01-04-2018, 00:12	#19685 (permalink)
qtouch Freak Poster Join Date: Nov 2006 Location: NJ, USA Posts: 454 Member: 399404 Status: Offline Thanks Meter: 70	UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Run dialer and type #0# (service mode will apear). 3. Connect the phone to UART cable, choose correct COM port in port settings. 4. Press 'Unlock' button. 5. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Unlock Selected model: SM-N950U Selected port: COM75 SAMSUNG Mobile USB Serial Port Software version: 30.2.2 Checking Login and Password... OK Ballance: 10 crd. You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-N950U Android version: 7.1.1 Product code: SM-N950UZKATMB Phone version: N950USQU1AQI5 PDA version: N950USQU1AQI5 CSC version: N950UOYN1AQI5 CSC country code: USA CSC sales code: TMB HW version: REV1.0 Phone SN: R28JA1RSWZE Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-08-01 RF cal date: 2017.10.19 IMEI: 358505084125042 Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM38 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.2.2

01-04-2018, 09:01	#19687 (permalink)
bek__441 Freak Poster Join Date: Aug 2017 Location: Duabi Posts: 112 Member: 2745836 Status: Offline Sonork: @djbeka Thanks Meter: 17	hello my phone SM-j510fn riper imei support pleas

01-04-2018, 11:59	#19689 (permalink)
iph0ne7 No Life Poster Join Date: Apr 2013 Location: morocco Age: 36 Posts: 824 Member: 1917054 Status: Offline Thanks Meter: 268	Operation: Unlock Selected model: SM-G930P Software version: 30.2.2 Waiting ADB device... OK Reading phone info... Model: SM-G930P Android version: 7.0 Product code: Not Active Phone version: G930PVPU2APE1 PDA version: G930PVPU4BQH1 CSC version: G930PSPT4BQAA CSC country code: USA CSC sales code: SPR HW version: REV0.6 Phone SN: 00000000000 Modem board: MSM8996 Security patch: 2017-08-01 RF cal date: 2016.09.28 Writing AT RIL... OK Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.2.2

01-04-2018, 14:30	#19691 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Operation: Read Codes via Server Selected model: SM-N950F Software version: 30.2.2 Checking Login and Password... OK Ballance: 23 crd. You have 23 credit(s) left. This operation takes 5 credits.Continue? Yes Searching Samsung modem... detected COM699 Reading phone info... OK Model: SM-N950F AP version: N950FXXU2BQKG CSC version: N950FOXM2BQKG CP version: N950FXXU2BQKG Product code: PHN Phone SN: R58J85T249A Unique number: CE06171644B02323017E Searching Samsung diag port... detected COM698 Reading phone info... OK CP version: N950FXXU2BQKG CP build: Nov 29 2017 10:27:46 Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 53082936 NET lock: 42792502 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.30.2.2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29