iphone n2 mtk6235ba / mt6235 please help

[Risadaman]

Hi guys,

i just got this cable (the one in the top left)


can i make a proper cable using this one?

[Risadaman]

ah by the way, this is the back of the phone,


and in the description it says:

"T-Flash Card Supporting,2GB for free,support extend TF card"

Maybe i can flash from the memory card?

What´s the real name of this phone?

[υИқИΘШИ®]

No you cant flash the phone useing memory card but u can use that usb cable.And your phones doesnt have a real name bcz at the market noww all chinese mircale phones have diffrent names not a stabil name.But if u want a simple name we can say clone i-phone

B.R

[Risadaman]

the name of the phone is for identification purposes, for example of wich flash, cable pinout, program, i must use. About the usb cable i just have this one in the upper left of the picture, i dont have multimeter as well. Can i make a cable using that one as a basis?

Im not a phone professional, i just need to fix this phone, this single time, for my wife. Im sorry im not advancing, can you please be a bit mor especific, so i can solve this issue? im no been lazy, just noob in this subject.

Thanks

[Risadaman]

Unknown, gsm,

im not lazy, im trying real hard, but still no progress

[υИқИΘШИ®]

Originally Posted by Risadaman

Unknown, gsm,

im not lazy, im trying real hard, but still no progress

Dear sorry for my question but ı have to ask it why you ned to flash your phone?

NOTİC: AT THE MOMENT ANY OF THE CHİNESE MİRCALE PHONES HAVENT GOT NEVER FİRMWARE VERSİONS TO BE UPGRADEBLE ONLY ORGİNAL FİRMWARES CAN BE REFLASHED AND İF YOUR SET DOESNT HAVE ANY PROBLEM JUST TRY TU ENJOY USEİNG YOUR PHONE.

B.R

[Risadaman]

Unknown, please take a time to read the first post. I know its confusing.

The phone CAN´T be used because it is in a "screen calibration loop". This is the first screen that appears in the phone, and it never ends trying to calibrate.

[Umair Rashid]

@Risadaman
1.download and install 2.89 of chinese miracle
2.read full flash
3.press calibrate touch screen,it will ask file give the same which u just readed.
4.done

[υИқИΘШИ®]

Originally Posted by Umair Rashid

@Risadaman
1.download and install 2.89 of chinese miracle
2.read full flash
3.press calibrate touch screen,it will ask file give the same which u just readed.
4.done

Dear he is a end user he doesnt have any boxs or cables etc.

@Risadaman

For touch screen calibrations only professional equipments can solve the problem you need infinity box or other box relased in the market at the moment no other way to solve this problem.but one way more it can also be hardware problem so you need to change touch screen.

W.br

[Risadaman]

Before anything, thank you very much guys taking your time to answer this post.

The touch screen is ok for what i can notice, really looks like screen calibration problem, i have two of this phones with the same problem. i have i palm treo and when i do the calibration the wrong way it happens just like in this phone, before i reseted it.

So, as an end user there is nothing i can do?

I may destroy the cable that i have and try to make one, im a bit helpless.

[Umair Rashid]

@Risadaman
U can't celebrate free ur phone unless u use Infinty.
Some Technician do skip celebration by hardware and for that they replace broken lcd sheet by OK one.

[Mastertool]

we already test by Masterbox ,your mobile pinout on the pcb mobile not on the mobile connector so need open your mobile than solder RX ,TX ,GND than can format or flash your mobile for repaire. cant use usb cables what is coming in packing your mobile must solder pinout one the pcb.
kamal.

Originally Posted by Risadaman

Hi guys, i have a phone like this, it use mt6235, the name is iphone n2 3rd generation.
[IMG]http://image.******.com/upload/20096/77/ff8080811f69ef93011f7e03dbe1028a/productimg1245945937765.jpg[/IMG]

I kown nothing about programming, flashing, etc. the only thing that i ever did related was to upgrade the firmware of my palm treo 680.

I got two units and both have the same problem:

Looks like the calibration is wrong, so when i point the stylus in the middle of the screen, the spot activated in the screen is right in the same position, but if i try to click upward, down, or to the sides of the screen, the spot of the screen activated is veeery far from the point that i was really touching.

So botton an up sections of the screen where you have all the options (ok, back, numbers selecions in the bottom) are completly unacessible. I touch on them and the activated point on the screen is 1 centimiter away from it.

To fix this i decided to try to run the calibration from the menu, but unfortunately, it keeps asking to hit the mark on top-left and the bottom right, endlessly in a loop, and i cant finish the operation.

I started reading all about the phone, downloaded mtk tools, com driver for the phone, and was trying to somehow reset or get a new firmware to update, hoping to fix it.

But in one of the foruns that i visited i saw the phone security code, and from that i could reset it to factory settings, bingo, i managed to put the code on the phone and reseted it!

Alas, when the phone screen comes up again it is in uncopreensible chinese, AND the more serious problem.

BEFORE you may acess any phone funcion, such as for example select com port, usb drive, or any funcion of the phone, the screen calibration comes up, and you MUST do it before acessing any function of the phone, so im stuck in the same endless calibration screen

I cant understand the chinese, but the screen is the same that ask to calibrate the screen with the same reddots top-left and bottom right to click and calibrate, i clicked on them more than a 100 times and it keeps on this loop

Anybody know how to solve, fix this? This phone was for my wife and she spent 1 month trying to use it as it was, and im very dissapointed.

[xcit]

Risadaman you can check if activated the virtual keyboard in java. I have this problem with calibration when i activated this option.Goodluck
You must set to never

[Risadaman]

Xcit, thank you very much, unfortunately i cant acess any option of the phone

Mastertool, i have a serial cable that i can dismantle to do a cable for flashing if possible. Its possible in this phone? how? where im supposed to conect the RX, TX and GND? i must open the phone and find some place to connect the serial cable? im an end user and has no boxes, sorry

[Umair Rashid]

Originally Posted by Risadaman

Xcit, thank you very much, unfortunately i cant acess any option of the phone

Mastertool, i have a serial cable that i can dismantle to do a cable for flashing if possible. Its possible in this phone? how? where im supposed to conect the RX, TX and GND? i must open the phone and find some place to connect the serial cable? im an end user and has no boxes, sorry

Unscrew the phone ,locate Rx and tx,Solder Rj45 cable and scan with any box.