[14-02-2012] cyclone box free and standalone xgold213 unlocking released - Page 2 - GSM-Forum

erikajani · 02-15-2012, 10:04

Quote:

Originally Posted by moulnisky

Start again the software and wait for the loaders being updated too

BR

Alex

all up to date

how to loaders update??

Mr.3. · 02-15-2012, 12:30

Quote:

Originally Posted by erikajani

all up to date

how to loaders update??

if no updates available then you can read xgold213 HASH

cardlinux · 02-15-2012, 14:10

nice news from Cyclone

HP GSM · 02-15-2012, 14:19

Cyclone Box team help

After the latest update on 14/02/2012. My box and run the tool using the Nokia reported as follows:

Code:

Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Nokia/Blackberry Application v01.88, (Feb 14 2012 01:59:38, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0000AA5
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Initializing security card...
Card Serial Number: D2xxxxxx
Card Firmware Revision: 0109
Initialization has failed -> Security Card is expired.

erikajani · 02-15-2012, 14:20

Quote:

Originally Posted by Mr.3.

if no updates available then you can read xgold213 HASH

read post.i solved problem

Mr.3. · 02-15-2012, 14:31

Quote:

Originally Posted by HP GSM

Cyclone Box team help

After the latest update on 14/02/2012. My box and run the tool using the Nokia reported as follows:

Code:

Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Nokia/Blackberry Application v01.88, (Feb 14 2012 01:59:38, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0000AA5
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Initializing security card...
Card Serial Number: D2xxxxxx
Card Firmware Revision: 0109
Initialization has failed -> Security Card is expired.

http://forum.gsmhosting.com/vbb/f528...solve-1423690/

kirumiratopup · 02-15-2012, 17:39

does this update need a super pc with ati card or no .thanks

Mr.3. · 02-16-2012, 04:17

Quote:

Originally Posted by kirumiratopup

does this update need a super pc with ati card or no .thanks

Yes you need gpu cards

uridian · 02-17-2012, 03:27

my test
phone is on usb conection

Reading SL3 LOG File...
[Nokia C1-01 USB Phonet]: Port opened OK!
MCU Version V 04.40a
MCU Date 04-03-11
Product RM-608 (Nokia C1-01.1)
Manufacturer (c) Nokia
IMEI 01285900304---- (modificado por mi)
Mastercode 262142124
XGold213 Detected
Analyzing Profile Bits...
Phone CAN NOT be NCK unlocked using KEYPAD
Phone CAN NOT be NCK unlocked using FBUS
Failed to Read SL3 LOG File -> Phone can't be unlocked by LBF Method - it will not acccept any NCK Code!

my phone is TECEL Mexico

deblok34 · 02-17-2012, 14:50

20 digits is not supported ?

dky_tel · 02-18-2012, 12:16

ailed to Boot XGold213 -> Failed to Initialize USB Handshake
Failed to Read SL3 LOG File -> Failed to Boot XGold213
Reading SL3 LOG File...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 06.96
MCU Date 09-09-11
Product RM-692 (Nokia C2-02 / C2-07)
Manufacturer (c) Nokia
IMEI 358641042896687
Mastercode 6751403360
XGold213 Detected
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
Failed to Boot XGold213 -> Failed to Initialize USB Handshake
Failed to Read SL3 LOG File -> Failed to Boot XGold213

cannot read sha. c2-02

moulnisky · 02-18-2012, 12:34

Quote:

Originally Posted by dky_tel

ailed to Boot XGold213 -> Failed to Initialize USB Handshake
Failed to Read SL3 LOG File -> Failed to Boot XGold213
Reading SL3 LOG File...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 06.96
MCU Date 09-09-11
Product RM-692 (Nokia C2-02 / C2-07)
Manufacturer (c) Nokia
IMEI 358641042896687
Mastercode 6751403360
XGold213 Detected
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
Failed to Boot XGold213 -> Failed to Initialize USB Handshake
Failed to Read SL3 LOG File -> Failed to Boot XGold213

cannot read sha. c2-02

No need to remove the battery.. just leave the software doing its job
if still problem start from this post
http://forum.gsmhosting.com/vbb/8152085-post18.html

BR

Alex

kagnassy · 02-18-2012, 12:37

c2-02 read problem

Failed to Read SL3 LOG File -> Initial SP corrupted or not a Baseband5 phone detected, maybe try again?

dky_tel · 02-18-2012, 12:45

If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Failed to Boot XGold213 -> Failed to Initialize USB Handshake
Failed to Read SL3 LOG File -> Failed to Boot XGold213same froblem bro..

naseer_mansehra · 02-25-2012, 16:21

First set switch on attached usb cable then unlock no need removed batter and cable i tested set automaticaly goes in local mode

02-15-2012, 17:39	#22 (permalink)
kirumiratopup Freak Poster Join Date: Jun 2007 Posts: 246 Member: 525684 Status: Offline Thanks Meter: 17	Does this update needs super pc or no does this update need a super pc with ati card or no .thanks

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-15-2011 13:08
wt603 and .pkd	ARt	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-13-1999 19:18

02-15-2012, 14:10	#18 (permalink)
cardlinux Freak Poster Join Date: Oct 2008 Location: Labradors world Posts: 154 Member: 889070 Status: Offline Sonork: 100.1602568 Thanks Meter: 12	nice news from Cyclone

02-17-2012, 03:27	#24 (permalink)
uridian Junior Member Join Date: Feb 2008 Posts: 30 Member: 706616 Status: Offline Thanks Meter: 3	my test phone is on usb conection Reading SL3 LOG File... [Nokia C1-01 USB Phonet]: Port opened OK! MCU Version V 04.40a MCU Date 04-03-11 Product RM-608 (Nokia C1-01.1) Manufacturer (c) Nokia IMEI 01285900304---- (modificado por mi) Mastercode 262142124 XGold213 Detected Analyzing Profile Bits... Phone CAN NOT be NCK unlocked using KEYPAD Phone CAN NOT be NCK unlocked using FBUS Failed to Read SL3 LOG File -> Phone can't be unlocked by LBF Method - it will not acccept any NCK Code! my phone is TECEL Mexico

02-17-2012, 14:50	#25 (permalink)
deblok34 Junior Member Join Date: Jul 2005 Age: 41 Posts: 37 Member: 163047 Status: Offline Thanks Meter: 5	20 digits is not supported ?

02-18-2012, 12:16	#26 (permalink)
dky_tel No Life Poster Join Date: Feb 2005 Location: (United States Of GINGOOG CITY Age: 48 Posts: 1,613 Member: 120328 Status: Offline Thanks Meter: 243	ailed to Boot XGold213 -> Failed to Initialize USB Handshake Failed to Read SL3 LOG File -> Failed to Boot XGold213 Reading SL3 LOG File... [Nokia USB Phonet]: Port opened OK! MCU Version V 06.96 MCU Date 09-09-11 Product RM-692 (Nokia C2-02 / C2-07) Manufacturer (c) Nokia IMEI 358641042896687 Mastercode 6751403360 XGold213 Detected Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found Booting X-Gold via USB... If PC Can't detect any new device, probably your phone is erased. Do following if needed: 1. Eject battery 2. Eject cable 3. Insert cable 4. Insert battery 5. Press power-on [Nokia USB Flashing Generic]: Port opened OK! Failed to Boot XGold213 -> Failed to Initialize USB Handshake Failed to Read SL3 LOG File -> Failed to Boot XGold213 cannot read sha. c2-02

02-18-2012, 12:37	#28 (permalink)
kagnassy Junior Member Join Date: Jul 2009 Posts: 29 Member: 1083742 Status: Offline Sonork: 0022376011896 Thanks Meter: 4	c2-02 read problem Failed to Read SL3 LOG File -> Initial SP corrupted or not a Baseband5 phone detected, maybe try again?

02-18-2012, 12:45	#29 (permalink)
dky_tel No Life Poster Join Date: Feb 2005 Location: (United States Of GINGOOG CITY Age: 48 Posts: 1,613 Member: 120328 Status: Offline Thanks Meter: 243	If PC Can't detect any new device, probably your phone is erased. Do following if needed: 1. Eject battery 2. Eject cable 3. Insert cable 4. Insert battery 5. Press power-on [Nokia USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Failed to Boot XGold213 -> Failed to Initialize USB Handshake Failed to Read SL3 LOG File -> Failed to Boot XGold213same froblem bro..

02-25-2012, 16:21	#30 (permalink)
naseer_mansehra No Life Poster Join Date: Dec 2008 Location: MANSEHRA Posts: 944 Member: 921094 Status: Offline Sonork: 100.1603246 Thanks Meter: 326	First set switch on attached usb cable then unlock no need removed batter and cable i tested set automaticaly goes in local mode