GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Cyclonebox
Reload this Page 2330 Successfully Flashed
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


 
 
LinkBack Thread Tools Display Modes
Old 07-11-2009, 10:05   #1 (permalink)
No Life Poster
 
xerraco's Avatar
 
Join Date: Nov 2008
Location: RVIII
Posts: 11,696
Member: 890926
Status: Offline
Thanks Meter: 2,053
2330 Successfully Flashed

Failed with other Tool but with Cyclone
Quote:
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
rm512__06.75.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898981 @ 0x01000000, Intel, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x00898981 @ 0x02000000, Intel, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898981 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 84079E5D476DD8081F44A1195A
MSID-Plain: 2C40BAE900941F0CA8000000
FAID-Crypted: DB266DADC6B907701D1ED978
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01CFFFFF]
Erase taken 65.453s
Writing 191 blocks...
All blocks written OK! Time taken 850.219s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
rm512__06.75.image_t_ph_red, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898981 @ 0x01000000, Intel, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x00898981 @ 0x02000000, Intel, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898981 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.09V
MSID-Crypted: 84E2DF517B8A2134CE570F703E
MSID-Plain: D26EBAF100941F0CAA000610
FAID-Crypted: 4DC29446DB4D658AFA7EA054
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02180000-0x02E7FFFF]
Erasing NOR Region [0x02E80000-0x02FBFFFF]
Erase taken 100.968s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 256 blocks...
All blocks written OK! Time taken 259.78s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
rm512__06.75.ppm_t, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898981 @ 0x01000000, Intel, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x00898981 @ 0x02000000, Intel, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898981 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 8432097C4B9A59FAD5F1A10A87
MSID-Plain: 3E4EBAE900941F0CA8000000
FAID-Crypted: 3CF2DCD4773C5B53D76350B2
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01D00000-0x0217FFFF]
Erase taken 12.203s
Writing 40 blocks...
All blocks written OK! Time taken 172.188s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Post-flash tasks finished...
Flash successfully finished!
 
The Following User Says Thank You to xerraco For This Useful Post:
Old 07-11-2009, 10:15   #2 (permalink)
No Life Poster
 
NADEEM GONDAL's Avatar
 
Join Date: Aug 2007
Location: England
Posts: 3,691
Member: 575900
Status: Offline
Thanks Meter: 3,177
Thankc for nice feedback...
Expect more
 
Old 07-11-2009, 14:22   #3 (permalink)
No Life Poster
 
.::koolfriend4u::.'s Avatar
 
Join Date: Nov 2005
Posts: 1,478
Member: 200145
Status: Offline
Sonork: 100.1596786
Thanks Meter: 677
@ xerraco

is it ur phone working good,after flashing??!!

Quote:
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
kindly inform here..i need to flash 2 phones..

can i use mini-easy cable for flashing?
anyhow,great info..
nice cyclone box.

good luck & thanks
Last edited by .::koolfriend4u::.; 07-11-2009 at 14:28.
 
Old 07-12-2009, 03:21   #4 (permalink)
No Life Poster
 
xerraco's Avatar
 
Join Date: Nov 2008
Location: RVIII
Posts: 11,696
Member: 890926
Status: Offline
Thanks Meter: 2,053
Quote:
Originally Posted by .::koolfriend4u::. View Post
@ xerraco

is it ur phone working good,after flashing??!!



kindly inform here..i need to flash 2 phones..

can i use mini-easy cable for flashing?
anyhow,great info..
nice cyclone box.

good luck & thanks
Yeah!Working Great with Themes & Tones, I Load mcu+ppm+cnt then Flash & i used Easy Cable.
 
Old 07-12-2009, 04:58   #5 (permalink)
No Life Poster
 
NADEEM GONDAL's Avatar
 
Join Date: Aug 2007
Location: England
Posts: 3,691
Member: 575900
Status: Offline
Thanks Meter: 3,177
Quote:
Originally Posted by .::koolfriend4u::. View Post
@ xerraco

is it ur phone working good,after flashing??!!



kindly inform here..i need to flash 2 phones..

can i use mini-easy cable for flashing?
anyhow,great info..
nice cyclone box.

good luck & thanks
CP extraction Failed mostly cause Problem in BB5 phones (not Rapido)
 
Old 07-12-2009, 19:23   #6 (permalink)
No Life Poster
 
karwos's Avatar
 
Join Date: Feb 2005
Location: Poland
Age: 34
Posts: 4,943
Member: 117496
Status: Offline
Sonork: 100.83919
Thanks Meter: 22,689
New phones have sepearete FS partition which gallery, and unpacking is not needed in fact.
It were needed in old phones (3100) when CNT was flashed in temporary flash area, and then UNPACKED in PM area (fields 158,159) after that in this tmp area was flashed PPM file
So such msgs can be ignored in fact.
 
 

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
2330 need flash file khm050 Nokia Digital Core Technology 4 ( DCT-4 ) 1 11-06-2009 14:08
Success Flashing and Error Flashing with Latest NSS Post Here... bestncheap Federal One 13 07-13-2007 18:22
Anyone successfully flashed an Orange SL42e to SL45i Mr Gimper x1x to x45/x50 2 01-08-2002 08:08

 



All times are GMT +1. The time now is 07:34.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.22229 seconds with 9 queries

SEO by vBSEO