6300i eno sw - GSM-Forum

josipluic · 07-09-2009, 07:16

i cant unlock 6300i rm-337 with cyclone ,so i see i need eno sw,from where i can download it?

moulnisky · 07-09-2009, 07:18

6300 is SL1 and easy to unlock..
before you use the eno software can you check the version of the firmware?
remember if the software version is 5x.xx it is SL3 so better you don't touch it.
Please post infos.

BR

Alex

josipluic · 07-09-2009, 07:30

6300i rm337,not 6300 rm217

NADEEM GONDAL · 07-09-2009, 08:23

Yes
SIMLOCK2 = SL2

BB5+ RAP3GV3
Its Normal Check Flashing BUS first then Make Backup Create RPL from Phone ...then Unlock ....good luck

josipluic · 07-09-2009, 20:14

unlock is imposible, try 20 times, cable 100% OK , problem is protected field 308, so i need eno sw for these model, or maybe tray crossflashing with some other model wich dont have pm308
protected?

karwos · 07-09-2009, 22:31

Downgrade SW and you can unlock your phone without any problems.

josipluic · 07-10-2009, 10:19

MCU Version V 05.60
MCU Date 10-12-08
Product RM-337
Manufacturer (c) Nokia
IMEI 354830021247608
Mastercode 6611575530
Simlock backup OK, saved to RM-337_354830021247608_10.7.2009_111340.SLBackup.PM
Backup simlock thread finished, continuing...
Applying downgrade patch...
Apply downgrade patch failed -> Failed to write patched PM 308
Failed to Process all Image files -> Aborted by user due to failed downgrade patch

so i try downgrade from 5,20 to 3,41 -dead phone, back to 5,20 ok then upgrade to 5.60 ok, then downgrade to 5.20- dead phone.........so phone cant be unlocked and downgrade dont work...tested with cyclone and jaf

moulnisky · 07-10-2009, 20:08

Can you reed the infos of the mobile and post here please?

BR

Alex

josipluic · 07-10-2009, 22:50

MCU Version V 05.60
MCU Date 10-12-08
Product RM-337
Manufacturer (c) Nokia
IMEI 354830021247608
Mastercode 6611575530
IMEI Spare 3A45380012426700
IMEI SV 3345380012426720F5000000
PPM V 05.60, 10-12-08, RM-337, (c) Nokia , D
CNT Content: d_cz_sk, V 05.60, 10-12-08, RM-337, (c) Nokia ,
PSN KEV552562
Product Code 0574850
Module Code 0203875
Basic Product Code 0549771
PSD 0000000000000000
LPSN 0
WLAN MAC 0021AA112998
RETU 32
TAHVO 53
AHNE 11
HW 1202
RFIC 17211721
DSP ICPR72_08w47
LCD SEIKO
BT 2222-143C
Simlock Server SIMLOCK SERVER
Simlock Key 2190100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 21901F

josipluic · 07-10-2009, 22:51

Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 2E80010F5E9B7B56D18C50EE552284E9AF86DFB7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F791A8EC5CEF8D23B5C6789B94C6F2843253DA5
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 2E80010F5E9B7B56D18C50EE552284E9AF86DFB7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Writing Security Block...
BB5 Unlock Failed -> Failed to write Security Block

moulnisky · 07-10-2009, 23:15

Why don't you unlock it using nck code calculation?

BR

Alex

josipluic · 07-11-2009, 07:30

how ? when unlock e51 i got nck codes but here only what see in log, on these model cant even reset securyti code

moulnisky · 07-11-2009, 07:44

Did you install the last update and the new firmware?

josipluic · 07-13-2009, 14:13

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7828
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.05, (Jun 22 2009 12:23:29, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: CONST-TX2-PIN ; VISTA-SUPPORT ; BB5-NCK-CALC
Box Serial Number: C000144F
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk14
Initializing security card...
Card Serial Number: D300044A
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5,02v PASSED
MCU Voltage 3,28v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,43v PASSED
VBAT Voltage 4,87v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 5,06v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
MCU Version V 05.60
MCU Date 10-12-08
Product RM-337
Manufacturer (c) Nokia
IMEI 354830021247608
Mastercode 6611575530
IMEI Spare 3A45380012426700
IMEI SV 3345380012426720F5000000
PPM V 05.60, 10-12-08, RM-337, (c) Nokia , D
CNT Content: d_cz_sk, V 05.60, 10-12-08, RM-337, (c) Nokia ,
PSN KEV552562
Product Code 0574850
Module Code 0203875
Basic Product Code 0549771
PSD 0000000000000000
LPSN 0
WLAN MAC 0021AA112998
RETU 32
TAHVO 53
AHNE 11
HW 1202
RFIC 17211721
DSP ICPR72_08w47
LCD SEIKO
BT 2222-143C
Simlock Server SIMLOCK SERVER
Simlock Key 2190100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 21901F
BB5 Unlock Started...
MCU Version V 05.60
MCU Date 10-12-08
Product RM-337
Manufacturer (c) Nokia
IMEI 354830021247608
Mastercode 6611575530
Simlock Server SIMLOCK SERVER
Simlock Key 2190100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 21901F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 2E80010F5E9B7B56D18C50EE552284E9AF86DFB7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F791A8EC5CEF8D23B5C6789B94C6F2843253DA5
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 2E80010F5E9B7B56D18C50EE552284E9AF86DFB7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Writing Security Block...
BB5 Unlock Failed -> Failed to write Security Block

only what i find here on forum is solution with eno sw, but i cant find enywhere that sw

moulnisky · 07-13-2009, 20:03

May be doesn't exist.. there are arounf only ver 1.0 and 3.0 of this mnobile firmware..
did you try to downgrade to 3.xx?
you could try as well a firmware of another mobile with same hash and same MCU.. (I wouldn't but if you wan't make a try could worlk)

BR

Alex

07-09-2009, 07:16	#1 (permalink)
josipluic Freak Poster Join Date: Apr 2007 Location: croatia Posts: 263 Member: 490127 Status: Offline Thanks Meter: 86	6300i eno sw i cant unlock 6300i rm-337 with cyclone ,so i see i need eno sw,from where i can download it?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is ENO files..? <<Download some eno file from here>>	Shohel_sst	Nokia Base Band 5 ( BB-5 )	10	09-08-2013 10:26
:: Any body used ENO sw... post here ::	saiftc2	Nokia Base Band 5 ( BB-5 )	15	04-06-2010 15:45
Eno sw	Tom_x	Nokia Base Band 5 ( BB-5 )	0	12-16-2009 13:35
Eno sw	Tom_x	Nokia Base Band 5 ( BB-5 )	0	12-16-2009 13:32

07-09-2009, 07:18	#2 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	6300 is SL1 and easy to unlock.. before you use the eno software can you check the version of the firmware? remember if the software version is 5x.xx it is SL3 so better you don't touch it. Please post infos. BR Alex

07-09-2009, 07:30	#3 (permalink)
josipluic Freak Poster Join Date: Apr 2007 Location: croatia Posts: 263 Member: 490127 Status: Offline Thanks Meter: 86	6300i rm337,not 6300 rm217

07-09-2009, 08:23	#4 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	Yes SIMLOCK2 = SL2 BB5+ RAP3GV3 Its Normal Check Flashing BUS first then Make Backup Create RPL from Phone ...then Unlock ....good luck

07-09-2009, 20:14	#5 (permalink)
josipluic Freak Poster Join Date: Apr 2007 Location: croatia Posts: 263 Member: 490127 Status: Offline Thanks Meter: 86	unlock is imposible, try 20 times, cable 100% OK , problem is protected field 308, so i need eno sw for these model, or maybe tray crossflashing with some other model wich dont have pm308 protected?

07-09-2009, 22:31	#6 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	Downgrade SW and you can unlock your phone without any problems.

07-10-2009, 10:19	#7 (permalink)
josipluic Freak Poster Join Date: Apr 2007 Location: croatia Posts: 263 Member: 490127 Status: Offline Thanks Meter: 86	MCU Version V 05.60 MCU Date 10-12-08 Product RM-337 Manufacturer (c) Nokia IMEI 354830021247608 Mastercode 6611575530 Simlock backup OK, saved to RM-337_354830021247608_10.7.2009_111340.SLBackup.PM Backup simlock thread finished, continuing... Applying downgrade patch... Apply downgrade patch failed -> Failed to write patched PM 308 Failed to Process all Image files -> Aborted by user due to failed downgrade patch so i try downgrade from 5,20 to 3,41 -dead phone, back to 5,20 ok then upgrade to 5.60 ok, then downgrade to 5.20- dead phone.........so phone cant be unlocked and downgrade dont work...tested with cyclone and jaf

07-10-2009, 20:08	#8 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Can you reed the infos of the mobile and post here please? BR Alex

07-10-2009, 22:50	#9 (permalink)
josipluic Freak Poster Join Date: Apr 2007 Location: croatia Posts: 263 Member: 490127 Status: Offline Thanks Meter: 86	MCU Version V 05.60 MCU Date 10-12-08 Product RM-337 Manufacturer (c) Nokia IMEI 354830021247608 Mastercode 6611575530 IMEI Spare 3A45380012426700 IMEI SV 3345380012426720F5000000 PPM V 05.60, 10-12-08, RM-337, (c) Nokia , D CNT Content: d_cz_sk, V 05.60, 10-12-08, RM-337, (c) Nokia , PSN KEV552562 Product Code 0574850 Module Code 0203875 Basic Product Code 0549771 PSD 0000000000000000 LPSN 0 WLAN MAC 0021AA112998 RETU 32 TAHVO 53 AHNE 11 HW 1202 RFIC 17211721 DSP ICPR72_08w47 LCD SEIKO BT 2222-143C Simlock Server SIMLOCK SERVER Simlock Key 2190100000000000 Simlock Profile 8000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 21901F

07-10-2009, 22:51	#10 (permalink)
josipluic Freak Poster Join Date: Apr 2007 Location: croatia Posts: 263 Member: 490127 Status: Offline Thanks Meter: 86	Reading Security Block... Security block OK! Determining PA Simlock... Booting RAP... CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000353 CMT_PUBLIC_ID: 2E80010F5E9B7B56D18C50EE552284E9AF86DFB7 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1 CMT_ROM_ID: 191EC665DFAAF68F RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM Flashbus Write baud set to 4.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 7F791A8EC5CEF8D23B5C6789B94C6F2843253DA5 APE Boot skipped on user request Restarting MCU... Determined PA Simlock: PA_SL2 Checking for Rootkey Hash support... Booting RAP... CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000353 CMT_PUBLIC_ID: 2E80010F5E9B7B56D18C50EE552284E9AF86DFB7 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1 CMT_ROM_ID: 191EC665DFAAF68F RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Exploiting - running preloader... Preloader running OK, Running Custom Loader... Custom loader running OK! Working... Received Security Block OK ! Writing Security Block... BB5 Unlock Failed -> Failed to write Security Block

07-10-2009, 23:15	#11 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Why don't you unlock it using nck code calculation? BR Alex

07-11-2009, 07:30	#12 (permalink)
josipluic Freak Poster Join Date: Apr 2007 Location: croatia Posts: 263 Member: 490127 Status: Offline Thanks Meter: 86	how ? when unlock e51 i got nck codes but here only what see in log, on these model cant even reset securyti code

07-11-2009, 07:44	#13 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Did you install the last update and the new firmware?

07-13-2009, 14:13	#14 (permalink)
josipluic Freak Poster Join Date: Apr 2007 Location: croatia Posts: 263 Member: 490127 Status: Offline Thanks Meter: 86	Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7828 Handling device: [Cyclone Team], [Cyclone Bootloader] Handling device: [Cyclone Team], [Cyclone Box] Initializing box... Box Firmware: Cyclone Nokia Application v1.05, (Jun 22 2009 12:23:29, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: CONST-TX2-PIN ; VISTA-SUPPORT ; BB5-NCK-CALC Box Serial Number: C000144F HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk14 Initializing security card... Card Serial Number: D300044A Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 5,02v PASSED MCU Voltage 3,28v PASSED Core Voltage 1,78v PASSED VBAT Voltage 0,43v PASSED VBAT Voltage 4,87v PASSED Box VPP disabled VPP Voltage 0,04v PASSED Internal Box VPP Enabled VPP Voltage 5,06v PASSED Box VPP disabled VPP Voltage 0,04v PASSED External Box VPP Enabled VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Initializing FBUS... All initialized - Ready to work MCU Version V 05.60 MCU Date 10-12-08 Product RM-337 Manufacturer (c) Nokia IMEI 354830021247608 Mastercode 6611575530 IMEI Spare 3A45380012426700 IMEI SV 3345380012426720F5000000 PPM V 05.60, 10-12-08, RM-337, (c) Nokia , D CNT Content: d_cz_sk, V 05.60, 10-12-08, RM-337, (c) Nokia , PSN KEV552562 Product Code 0574850 Module Code 0203875 Basic Product Code 0549771 PSD 0000000000000000 LPSN 0 WLAN MAC 0021AA112998 RETU 32 TAHVO 53 AHNE 11 HW 1202 RFIC 17211721 DSP ICPR72_08w47 LCD SEIKO BT 2222-143C Simlock Server SIMLOCK SERVER Simlock Key 2190100000000000 Simlock Profile 8000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 21901F BB5 Unlock Started... MCU Version V 05.60 MCU Date 10-12-08 Product RM-337 Manufacturer (c) Nokia IMEI 354830021247608 Mastercode 6611575530 Simlock Server SIMLOCK SERVER Simlock Key 2190100000000000 Simlock Profile 8000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 21901F Reading Security Block... Security block OK! Determining PA Simlock... Booting RAP... CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000353 CMT_PUBLIC_ID: 2E80010F5E9B7B56D18C50EE552284E9AF86DFB7 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1 CMT_ROM_ID: 191EC665DFAAF68F RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM Flashbus Write baud set to 4.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 7F791A8EC5CEF8D23B5C6789B94C6F2843253DA5 APE Boot skipped on user request Restarting MCU... Determined PA Simlock: PA_SL2 Checking for Rootkey Hash support... Booting RAP... CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101 CMT_EM_ASIC_ID: 00000232 CMT_EM_ASIC_ID: 00000353 CMT_PUBLIC_ID: 2E80010F5E9B7B56D18C50EE552284E9AF86DFB7 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1 CMT_ROM_ID: 191EC665DFAAF68F RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Exploiting - running preloader... Preloader running OK, Running Custom Loader... Custom loader running OK! Working... Received Security Block OK ! Writing Security Block... BB5 Unlock Failed -> Failed to write Security Block only what i find here on forum is solution with eno sw, but i cant find enywhere that sw

07-13-2009, 20:03	#15 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	May be doesn't exist.. there are arounf only ver 1.0 and 3.0 of this mnobile firmware.. did you try to downgrade to 3.xx? you could try as well a firmware of another mobile with same hash and same MCU.. (I wouldn't but if you wan't make a try could worlk) BR Alex