Another N96 damaged sim area - GSM-Forum

wayne1957 · 09-30-2009, 20:03

I have received a N96 which some idiot has tried to unlock with free software. The phone was completely dead so I flashed it with latest version software which gives contact service on startup. Read info shows damaged sim info.

Code:

MCU Version    V ICPR72_09w13.2
MCU Date    19-05-09
Product        RM-247
Manufacturer    (c) Nokia
IMEI        3564060xxxxxxxx
Mastercode    2013752721
IMEI Spare    3A650406xxxxxxxx
IMEI SV        3365040652100504F8000000
Product Code    0543717
Basic Product Code    0542934
PSD        0000000000000000
LPSN        0
WLAN MAC    0022FC9540C0
APE SW        30.033
APE Variant    30.03330.033.001.130.033.098.1
APE Test        4032_PR10.0832_034_002
APE HW        0
APE ADSP    0
RETU        15
TAHVO        22
AHNE        11
HW        0543
RFIC        17141715
DSP        MC_4032_ICPR72_09w13
Failed to read info -> Failed to read SP info

Self test gives this

Code:

Selftests to proceed: 43
Passed        ST_UEM_CBUS_IF_TEST
Passed        ST_EAR_DATA_LOOP_TEST
Passed        ST_SIM_CLK_LOOP_TEST
Passed        ST_SIM_IO_CTRL_LOOP_TEST
Failed        ST_SIM_LOCK_TEST
Passed        ST_SECURITY_TEST
Passed        ST_PWR_KEY_TEST
Passed        ST_CURRENT_CONS_TEST
Passed        ST_BACKUP_BATT_TEST
Passed        ST_CMT_APE_WAKEUP_TEST
Passed        ST_HOOKINT_TEST
Passed        ST_BTEMP_TEST
Passed        ST_MBUS_RX_TX_LOOP_TEST
Passed        ST_EXT_DEVICE_TEST
Passed        ST_CDSP_SLEEPCLK_FREQ_TEST
Failed        ST_CDSP_SLEEPCLOCK_FREQ_TEST
Failed        ST_CDSP_RF_BB_IF_TEST
Failed        ST_CDSP_RF_SUPPLY_TEST
Failed        ST_CDSP_TX_IQ_TEST
Failed        ST_CDSP_TXC_DATA_TEST
Failed        ST_CDSP_PWR_DETECTOR_BIAS_TEST
Failed        ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Failed        ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Failed        ST_CDSP_WCDMA_TX_POWER_TEST
Failed        ST_CDSP_RX_IQ_LOOP_BACK_TEST
Failed        ST_CDSP_GSM_TX_POWER_TEST
Passed        ST_KEYBOARD_STUCK_TEST
Passed        ST_LPRF_IF_TEST
Passed        ST_CAMERA_IF_TEST
Passed        ST_SEC_CAMERA_IF_TEST
Passed        ST_CAMERA_AUTOFOCUS_TEST
Passed        ST_LPRF_AUDIO_LINES_TEST
Passed        ST_MAIN_LCD_IF_TEST
Passed        ST_BT_WAKEUP_TEST
Passed        ST_WLAN_TEST
Passed        ST_BT_WLAN_COEXISTENCE_TEST
Passed        ST_MASS_MEMORY_IF_TEST
Passed        ST_ACCEL_IF_TEST
Passed        ST_DVBH_TEST
Passed        ST_APE_EM_ASIC_TEST
Passed        ST_USB_LOOP_TEST
Passed        ST_RADIO_TEST
Passed        ST_TVOUT_IF_TEST
Selftests done, Tests total: 43, Tests passed: 31, Tests not passed: 12

Will a RPL file cure this, especially with so many self tests failed.

BR Wayne

moulnisky · 10-01-2009, 01:12

Post the full PM120 of the mobile.. may be we can recover it if nobody been playing too much with the mobile

BR

Alex

Qaisar Mahmood · 10-01-2009, 06:13

Just Unlock May be ur problem will be solved. I try to 6301 just Click Unlock My problem is solved.
Thanks Cyclone

wayne1957 · 10-01-2009, 17:44

Quote:

Originally Posted by moulnisky

Post the full PM120 of the mobile.. may be we can recover it if nobody been playing too much with the mobile

BR

Alex

Unable to upload file at the moment, I will keep trying

BR Wayne

moulnisky · 10-01-2009, 21:27

post in on www.rapidshare.com

BR

Alex

wayne1957 · 10-03-2009, 15:05

Quote:

Originally Posted by moulnisky

post in on www.rapidshare.com

BR

Alex

http://rapidshare.com/files/28817398...73304.rar.html

Hopefully I've done this right,

BR Wayne

Mohsin-* · 10-03-2009, 15:21

Quote:

Originally Posted by wayne1957

http://rapidshare.com/files/28817398...73304.rar.html

Hopefully I've done this right,

BR Wayne

write this rpl in plain formate

http://www.rapidsharepk.com/826788

bad_signal · 10-03-2009, 15:35

Quote:

Originally Posted by mohsin-*

write this rpl in plain formate

http://www.rapidsharepk.com/826788

what rpl man
he didn't ask for rpl
he ask f rpl can solve the problem or not

so
man repair ur 120 pm area
or if u have backup from ur phone pm area
just rewrite it again and it will help
br

Mohsin-* · 10-03-2009, 15:44

Quote:

Originally Posted by bad_signal

what rpl man
he didn't ask for rpl
he ask f rpl can solve the problem or not

so
man repair ur 120 pm area
or if u have backup from ur phone pm area
just rewrite it again and it will help
br

its repair SIMLOCK RPL calculate with original pm file

just write it

moulnisky · 10-03-2009, 16:14

Thick plain rpl, click on write RPL and select this rpl
http://rapidshare.com/files/28819584...009_173304.RPL
Let me know

BR

Alex

moulnisky · 10-03-2009, 16:18

Quote:

Originally Posted by bad_signal

what rpl man
he didn't ask for rpl
he ask f rpl can solve the problem or not

so
man repair ur 120 pm area
or if u have backup from ur phone pm area
just rewrite it again and it will help
br

It is an N96 and to write back a PM you need at least a cross-flash.
The RPL solution is the best and as well the mobile is not in config/provvider 0000 but is in Failed to read SP info so the PM308 is out of sync.

BR

Alex

Mohsin-* · 10-03-2009, 16:27

Quote:

Originally Posted by moulnisky

Thick plain rpl, click on write RPL and select this rpl
http://rapidshare.com/files/28819584...009_173304.RPL
Let me know

BR

Alex

sorry i upload wrong file

this is OK rpl

http://www.rapidsharepk.com/766835

wayne1957 · 10-03-2009, 17:58

Quote:

Originally Posted by moulnisky

Thick plain rpl, click on write RPL and select this rpl
http://rapidshare.com/files/28819584...009_173304.RPL
Let me know

BR

Alex

Still getting exactly the same on read info, I have tried rebuilding the pm120 as well with repair tool but no joy.
The person I got the phone off hasn't got the original pm either so I guess I'm stuck

Thanks for your help on this

BR Wayne

GSMman187 · 10-03-2009, 18:05

Quote:

Originally Posted by wayne1957

Still getting exactly the same on read info, I have tried rebuilding the pm120 as well with repair tool but no joy.
The person I got the phone off hasn't got the original pm either so I guess I'm stuck

Thanks for your help on this

BR Wayne

*WRONG.

You are not stuck.

BUY original RPL

............... contact on msn

moulnisky · 10-03-2009, 20:37

Quote:

Originally Posted by wayne1957

Still getting exactly the same on read info, I have tried rebuilding the pm120 as well with repair tool but no joy.
The person I got the phone off hasn't got the original pm either so I guess I'm stuck

Thanks for your help on this

BR Wayne

Could you please post the logs you get when you write the RPL?
If you get Simlock not accepted try this other one
http://rapidshare.com/files/28828343...015040_NEW.RPL
if the error is another or you don't get any error please let me know.

BR

Alex

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How To Repair damaged security units, damaged gdfs area,damaged EROM Of A1 Phone.	sarfaraghussain	Sony Ericsson	0	02-26-2010 17:40
Another N96 failed to unlock	mtb116	Universalbox	1	03-14-2009 03:28
another N96 done	hasnain	Universalbox	1	12-15-2008 21:22
another K550 damaged gdfs repaired	keaelite	SETool2	0	09-30-2008 10:14
another box damaged	REALTHOMAS	Multi-Box	2	06-27-2006 09:29

10-01-2009, 01:12	#2 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Post the full PM120 of the mobile.. may be we can recover it if nobody been playing too much with the mobile BR Alex

10-01-2009, 06:13	#3 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,934	Just Unlock May be ur problem will be solved. I try to 6301 just Click Unlock My problem is solved. Thanks Cyclone

10-01-2009, 21:27	#5 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	post in on www.rapidshare.com BR Alex

10-03-2009, 16:14	#10 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Thick plain rpl, click on write RPL and select this rpl http://rapidshare.com/files/28819584...009_173304.RPL Let me know BR Alex