Cant unlock 6630
 

Hello!

I am trying to unlock my 6630.

Unlock stops here:
(with Skip SP Read)
Info tells me "Failed to read info -> Failed to read extended info" after some information but thats common for old phones like this i think.. (?)

What can i do?

This is my first box. I dont know much. Be nice please. ;)

Thanks!

just do what is suggested in this thread
http://forum.gsmhosting.com/vbb/showthread.php?t=819077
afterward go in the tab bb5/flash and thick where says "skip repower boot"
remember to read te PM (tab common/info) before doing click on unlock

BR

Alex

Thanks for your answer.
I have already deleted the loaders and i have made my self a pm-backup.
I still cant unlock the phone..
It does not show any information about locks (Common/Read info).
Shows some data but stops with "Failed to read info -> Failed to read extended info".

Do i need to have a TMA-adapter?

May be not needed.. if the mobile when restarted switches on like it is under battery yes.. you need a tool like tma to correct the BSI value..
if the mobile instead stay off, when the software look for the mobile press power on on the mobile and wait for it being in local or test mode then click on retry.

BR

Alex

The phone is in local mode before i press unlock.
Some text go by and the screen goes blank.
I then get the message in my first post:

does the software ask you to press retry?

BR

Alex

No. It seems like the software communicates with the phone when the screen is blank too but then fails.

could be a cable problem..
go this way
connect the cable without the TX2 adapter
in the tab bb5/flash unthick were says "Use TX2" and retry.

BR

Alex

Same problem. Brand new cable but you never know of course..

yeah.. you can't never know :(
It is a slow mobile and needs timeout timing longer (Normally to unlock the old mobiles I use a laptop P3 667 mhz) but if it doesn't give you any chance to interact is a quite weird..
Honest I can't give you any more suggestions apart trying using the TMA adapter and using a higher BSI value.

BR

Alex

Thank you Alex. I will try the TMA adapter when it arrives (ordered one yesterday).

you are wellcome :)

BR

Alex

I've got the same problem with one 6630!!!I just can't figure it out...I tried all the tricks that you spoke about,but nothing...Exactly the same thing:the error messages and everything...

It is rap3gv2 (SL0)
better use an old tool for it..

BR

Alex