N93i hard to flash [SOLVED]

[misterG]

Hi cyclone team

Its so hard to flash N93i I tried to switch in 5 selection of switch to ufc cable but no luck in JAF box 1 time only im using same cable...

hear is the logs in cyclone:

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM156PE300013.C0 (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 67F432E73BF202691D9754896AB0D168CD7FC047
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B21
CMT_PUBLIC_ID: 1A4000145B89015417151DA53085A57A2526CF64
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
RM156PE300013.C0, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP2420 UNISTORE-II-1.2.1 ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x0075118D, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 3.391s
Writing all blocks...
Block Write Failed -> Failed to write data header at 0x245
Processing Flash Image Failed -> Failed to write all blocks
Failed to Process all Image files -> Failed to process RM156PE300013.C0
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM156PE300013.C0 (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 67F432E73BF202691D9754896AB0D168CD7FC047
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B21
CMT_PUBLIC_ID: 1A4000145B89015417151DA53085A57A2526CF64
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
RM156PE300013.C0, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP2420 UNISTORE-II-1.2.1 ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 1
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x0075118D, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 3.391s
Writing all blocks...
Block Write Failed -> Failed to write data header at 0x245
Processing Flash Image Failed -> Failed to write all blocks
Failed to Process all Image files -> Failed to process RM156PE300013.C0

Here is the logs in JAF:

JAF version 1.98.64
Detected PKEY: 90000CB0
Card life counter: 95.22%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.17.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Fast phone flashing selected.
Booting phone...
APE Boot Data:
Asic ID: 24200705
Asic Mode ID: 00
Asic Public ID: 67F432E73BF202691D9754896AB0D168CD7FC047
HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
ROM ID: 0000000000000000

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1A4000145B89015417151DA53085A57A2526CF64
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC
CMT Flash Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\omap2420_m1_2nd.fg
Loader version: 01.27.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE Flash Data: Not Available
Done!
Restarting phone...Done!
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-156\

Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-156\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-156\
Scanning ini files...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-156\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-156\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-156\RM156PE300013.C0
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-156\RM156PE300013.V01
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-156\RM156_300013_V4.00_uda_1.fpsx
APE Variant file: NONE
Languages in ppm: English,French,Italian,Spanish
Manual mode selected, version can't be checked!
Booting phone...
APE Boot Data:
Asic ID: 24200705
Asic Mode ID: 00
Asic Public ID: 67F432E73BF202691D9754896AB0D168CD7FC047
HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
ROM ID: 0000000000000000

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1A4000145B89015417151DA53085A57A2526CF64
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC
CMT Flash Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\omap2420_m1_2nd.fg
Loader version: 01.27.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE Flash Data: Not Available
APE Loader: C:\Program Files\ODEON\JAF\Flash\teflon_sam_nand_xsr_m1.fg
Loader version: 01.2E.00 -> Revision: 0000
Patching APE loader step1...
Patching APE loader step2...
Patching APE loader step3...
APE Loader Ready...
Operation took 0 minutes 8 seconds...
Sending CNF Data...
Sending CRT data...
Erasing...
Operation took 0 minutes 4 seconds...
Writing...
Stage 1
Sending APE HASH for X-LOADER
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending APE HASH for KEYS
Sending APE HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
Sending CMT PUB KEYS...
Sending CMT HASH for UPDAPP
Sending APE HASH for X-LOADER
Sending APE HASH for KEYS
Sending APE HASH for PRIMAPP
Sending APE HASH for SOS+XZIP
Sending APE HASH for PASUBTOC
Sending CMT HASH for DSP0
Sending APE PUB KEYS...
Sending APE HASH for SOS+UPDAPP
Sending APE HASH for SOS*CORE
Sending CMT HASH for MCUSW
Stage 2
Booting phone...
APE Boot Data:
Asic ID: 24200705
Asic Mode ID: 00
Asic Public ID: 67F432E73BF202691D9754896AB0D168CD7FC047
HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
ROM ID: 0000000000000000

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1A4000145B89015417151DA53085A57A2526CF64
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\omap2420_m1_2nd.fg
Loader version: 01.27.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE Flash Data: Not Available
APE Loader: C:\Program Files\ODEON\JAF\Flash\teflon_sam_nand_xsr_m1.fg
Loader version: 01.2E.00 -> Revision: 0000
Patching APE loader step1...
Patching APE loader step2...
Patching APE loader step3...
APE Loader Ready...
Operation took 0 minutes 8 seconds...
Sending CNF Data...
Sending CRT data...
Stage 1
Stage 2
Booting phone...
APE Boot Data:
Asic ID: 24200705
Asic Mode ID: 00
Asic Public ID: 67F432E73BF202691D9754896AB0D168CD7FC047
HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
ROM ID: 0000000000000000

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1A4000145B89015417151DA53085A57A2526CF64
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\omap2420_m1_2nd.fg
Loader version: 01.27.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE Flash Data: Not Available
APE Loader: C:\Program Files\ODEON\JAF\Flash\teflon_sam_nand_xsr_m1.fg
Loader version: 01.2E.00 -> Revision: 0000
Patching APE loader step1...
Patching APE loader step2...
Patching APE loader step3...
APE Loader Ready...
Operation took 0 minutes 8 seconds...
Sending CNF Data...
Sending CRT data...
Stage 1
Stage 2
FAST MODE finish!
Operation took 6 minutes 12 seconds...
Reseting phone...
PPM: C:\Program Files\Nokia\Phoenix\Products\RM-156\RM156PE300013.V01

Booting phone...
APE Boot Data:
Asic ID: 24200705
Asic Mode ID: 00
Asic Public ID: 67F432E73BF202691D9754896AB0D168CD7FC047
HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
ROM ID: 0000000000000000

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1A4000145B89015417151DA53085A57A2526CF64
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\omap2420_m1_2nd.fg
Loader version: 01.27.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE Flash Data: Not Available
APE Loader: C:\Program Files\ODEON\JAF\Flash\teflon_sam_nand_xsr_m1.fg
Loader version: 01.2E.00 -> Revision: 0000
Patching APE loader step1...
Patching APE loader step2...
Patching APE loader step3...
APE Loader Ready...
Operation took 0 minutes 8 seconds...
Sending CNF Data...
Erasing...
Operation took 0 minutes 0 seconds...
Writing...
Booting phone...
APE Boot Data:
Asic ID: 24200705
Asic Mode ID: 00
Asic Public ID: 67F432E73BF202691D9754896AB0D168CD7FC047
HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
ROM ID: 0000000000000000

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1A4000145B89015417151DA53085A57A2526CF64
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\omap2420_m1_2nd.fg
Loader version: 01.27.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE Flash Data: Not Available
APE Loader: C:\Program Files\ODEON\JAF\Flash\teflon_sam_nand_xsr_m1.fg
Loader version: 01.2E.00 -> Revision: 0000
Patching APE loader step1...
Patching APE loader step2...
Patching APE loader step3...
APE Loader Ready...
Operation took 0 minutes 8 seconds...
Sending CNF Data...
FAST MODE finish!
Operation took 3 minutes 3 seconds...
Reseting phone...
CNT: C:\Program Files\Nokia\Phoenix\Products\RM-156\RM156_300013_V4.00_uda_1.fpsx

Booting phone...
APE Boot Data:
Asic ID: 24200705
Asic Mode ID: 00
Asic Public ID: 67F432E73BF202691D9754896AB0D168CD7FC047
HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
ROM ID: 0000000000000000

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1A4000145B89015417151DA53085A57A2526CF64
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\omap2420_m1_2nd.fg
Loader version: 01.27.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE Flash Data: Not Available
APE Loader: C:\Program Files\ODEON\JAF\Flash\teflon_sam_nand_xsr_m1.fg
Loader version: 01.2E.00 -> Revision: 0000
Patching APE loader step1...
Patching APE loader step2...
Patching APE loader step3...
APE Loader Ready...
Operation took 0 minutes 8 seconds...
No erase block detected! Erase will be skiped!
Writing...
Booting phone...
APE Boot Data:
Asic ID: 24200705
Asic Mode ID: 00
Asic Public ID: 67F432E73BF202691D9754896AB0D168CD7FC047
HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
ROM ID: 0000000000000000

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1A4000145B89015417151DA53085A57A2526CF64
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\omap2420_m1_2nd.fg
Loader version: 01.27.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE Flash Data: Not Available
APE Loader: C:\Program Files\ODEON\JAF\Flash\teflon_sam_nand_xsr_m1.fg
Loader version: 01.2E.00 -> Revision: 0000
Patching APE loader step1...
Patching APE loader step2...
Patching APE loader step3...
APE Loader Ready...
Operation took 0 minutes 10 seconds...
FAST MODE finished!
Operation took 3 minutes 41 seconds...
Reseting phone...
Done!
Total time: 13 Minutes, 28 Seconds

Successfull

Its possible to add JAF as interface?????

Br,

Mister G

[moulnisky]

It is not a problem of interface.. The mobile is a rap3gv2 and this serie has problem if flashed using the TX2 line..
untick in the tab bb5/flash "use TX2" and retry the flash.

BR

Alex

[misterG]

Originally Posted by moulnisky

It is not a problem of interface.. The mobile is a rap3gv2 and this serie has problem if flashed using the TX2 line..
untick in the tab bb5/flash "use TX2" and retry the flash.

BR

Alex

Thanks Alex when i untick tab bb5/flash "use TX2", can i use yellow adaptor?

Br,

Mister G

[moulnisky]

Always use the TX2 adapter when working with the BB5 mobiles

BR

Alex

[misterG]

Thanks Alex for fast reply my phone now okey no logs because my client is excited to use it...

Br,

Mister G