N95 ONLY SHOW NOKIA& white SCREN - GSM-Forum

.:iTRi:. · 10-02-2009, 11:03

SELF TST

Passed ST_UEM_CBUS_IF_TEST
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Passed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_BACKUP_BATT_TEST
Failed ST_CMT_APE_WAKEUP_TEST
Passed ST_SLEEPCLK_FREQ_TEST
Passed ST_RADIO_TEST
Passed ST_HOOKINT_TEST
Passed ST_BTEMP_TEST
Passed ST_MBUS_RX_TX_LOOP_TEST
Passed ST_EXT_DEVICE_TEST
Passed ST_CDSP_RF_BB_IF_TEST
Passed ST_CDSP_RF_SUPPLY_TEST
Passed ST_CDSP_TX_IQ_TEST
Passed ST_CDSP_TXC_DATA_TEST
Passed ST_CDSP_PWR_DETECTOR_BIAS_TEST
Passed ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Passed ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Failed to make Selftests -> Phone is not responding for Selftest Request

vaghubha_sodha · 10-02-2009, 11:30

bro reads info logs here

mr. nokia · 10-02-2009, 17:19

try to flash
not help
try rehot

waqas_ali601200 · 10-02-2009, 17:31

just white screen our some time blue ?????

.:iTRi:. · 10-02-2009, 18:00

Just white sceen

flashed many time

moulnisky · 10-02-2009, 18:58

write a good pm using the sx4 auth

br

alex

here a PM
http://rapidshare.com/files/256765887/N95_RM-159.pm

.:iTRi:. · 10-02-2009, 19:25

CANT write pm

Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: B84F95FD32B8306B962F85613AB32503172825C9
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101011103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1F70010A0F520058D0725927DA13ADD72F41ADD3
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: F2C6EBADC86E6189
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Bypassing SX4...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: B84F95FD32B8306B962F85613AB32503172825C9
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101011103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1F70010A0F520058D0725927DA13ADD72F41ADD3
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: F2C6EBADC86E6189
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Failed to Write PM -> Invalid NPC Found! Magic is BAD! Try to write Sx4Bypass backup using Write Cert

moulnisky · 10-03-2009, 06:45

Re-heat it and retry.
Looks like an Hardware issue

BR

Alex

10-02-2009, 11:03	#1 (permalink)
.:iTRi:. No Life Poster Join Date: Mar 2006 Location: .:iTRi:. Posts: 1,200 Member: 240068 Status: Offline Thanks Meter: 201	N95 ONLY SHOW NOKIA& white SCREN SELF TST Passed ST_UEM_CBUS_IF_TEST Passed ST_EAR_DATA_LOOP_TEST Passed ST_SIM_CLK_LOOP_TEST Passed ST_SIM_IO_CTRL_LOOP_TEST Passed ST_SIM_LOCK_TEST Passed ST_SECURITY_TEST Passed ST_PWR_KEY_TEST Passed ST_CURRENT_CONS_TEST Passed ST_BACKUP_BATT_TEST Failed ST_CMT_APE_WAKEUP_TEST Passed ST_SLEEPCLK_FREQ_TEST Passed ST_RADIO_TEST Passed ST_HOOKINT_TEST Passed ST_BTEMP_TEST Passed ST_MBUS_RX_TX_LOOP_TEST Passed ST_EXT_DEVICE_TEST Passed ST_CDSP_RF_BB_IF_TEST Passed ST_CDSP_RF_SUPPLY_TEST Passed ST_CDSP_TX_IQ_TEST Passed ST_CDSP_TXC_DATA_TEST Passed ST_CDSP_PWR_DETECTOR_BIAS_TEST Passed ST_CDSP_RX_PLL_PHASE_LOCK_TEST Passed ST_CDSP_TX_PLL_PHASE_LOCK_TEST Failed to make Selftests -> Phone is not responding for Selftest Request

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N95 Only Show Nokia Logo Then Off	Sonu Jawed	Nokia Base Band 5 ( BB-5 )	15	12-01-2010 11:27
N95 Only Show Nokia Logo Then Off	..:::Gsm india:::..	Nokia Hardware & Hardware Repair	4	05-28-2009 05:47
n70 only shows a white screen when i turn it on	lex2323	Nokia Base Band 5 ( BB-5 )	6	07-05-2008 17:46
please help n95 white scren problem!!	SHOEB AHMED	Infinity-Box	0	10-21-2007 00:08

10-02-2009, 11:30	#2 (permalink)
vaghubha_sodha No Life Poster Join Date: Jul 2008 Location: BHARAT Age: 42 Posts: 4,314 Member: 823633 Status: Offline Thanks Meter: 1,705	bro reads info logs here

10-02-2009, 17:19	#3 (permalink)
mr. nokia Freak Poster Join Date: Jul 2004 Location: Egypt-Alex Posts: 229 Member: 73117 Status: Offline Thanks Meter: 31	try to flash not help try rehot

10-02-2009, 17:31	#4 (permalink)
waqas_ali601200 Banned Join Date: Mar 2006 Posts: 1,451 Member: 239004 Status: Offline Sonork: 100.1589817 Thanks Meter: 388	just white screen our some time blue ?????

10-02-2009, 18:00	#5 (permalink)
.:iTRi:. No Life Poster Join Date: Mar 2006 Location: .:iTRi:. Posts: 1,200 Member: 240068 Status: Offline Thanks Meter: 201	Just white sceen flashed many time

10-02-2009, 18:58	#6 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,054	write a good pm using the sx4 auth br alex here a PM http://rapidshare.com/files/256765887/N95_RM-159.pm

10-02-2009, 19:25	#7 (permalink)
.:iTRi:. No Life Poster Join Date: Mar 2006 Location: .:iTRi:. Posts: 1,200 Member: 240068 Status: Offline Thanks Meter: 201	CANT write pm Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: B84F95FD32B8306B962F85613AB32503172825C9 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101011103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 1F70010A0F520058D0725927DA13ADD72F41ADD3 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: F2C6EBADC86E6189 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5 Flashbus Write baud set to 2.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89 omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5 FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE) FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG Box VPP disabled Internal APE Phone VPP Enabled PAPUBKEYS Hash for APE: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89 Flashbus Write baud set to 5.0Mbits Restarting MCU... Bypassing SX4... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: B84F95FD32B8306B962F85613AB32503172825C9 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101011103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 1F70010A0F520058D0725927DA13ADD72F41ADD3 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: F2C6EBADC86E6189 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5 Flashbus Write baud set to 2.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89 APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits Failed to Write PM -> Invalid NPC Found! Magic is BAD! Try to write Sx4Bypass backup using Write Cert

10-03-2009, 06:45	#8 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,054	Re-heat it and retry. Looks like an Hardware issue BR Alex