|
Please help me for nokia n95 unlocking!!!! HI! Today I try to unlock Nokia n95, I used TX2 adaptor + TMA adaptor and 7 pin cable.However Test mode NEVER come up. I have to click on " CHECK FLASHING BUS" TO FORCE PHONE TO LOCAL MODE. AFTER THAT I CAN READ PHONE INFO. AFTER THAT, I CLICK ON UNLOCK AND PHONE PROCESSING TO UNLOCK. HOWEVER imlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 50506F Simlock[2,1] State: CLOSED Type: MCC-MNC Data: 50599F Simlock[3,1] State: CLOSED Type: MCC-MNC Data: 50506F Simlock[4,1] State: CLOSED Type: MCC-MNC Data: 50599F Simlock[5,1] State: CLOSED Type: MCC-MNC Data: 00101F Simlock[6,1] State: CLOSED Type: MCC-MNC Data: 00101F Reading Security Block... Security block OK! Determining PA Simlock... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5 Flashbus Write baud set to 4.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89 APE Boot skipped on user request Restarting MCU... Determined PA Simlock: PA_SL Checking for Rootkey Hash support... Restarting MCU... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Exploiting - running preloader... Preloader running OK, Running Custom Loader... Custom loader running OK! Working... Received Security Block OK ! Writing Security Block... BB5 Unlock Failed -> Phone not detected (FBUS) THE REASON IS PHONE IS NOT STABLE ON LOCAL MODE SO IT CAN NOT UNLOCK ANYMORE. PLEASE HELP ME ANY IDEA THANKS TOMMY |
[QUOTE=tommyvo;4569907]HI! Today I try to unlock Nokia n95, I used TX2 adaptor + TMA adaptor and 7 pin cable.However Test mode NEVER come up. I have to click on " CHECK FLASHING BUS" TO FORCE PHONE TO LOCAL MODE. AFTER THAT I CAN READ PHONE INFO. AFTER THAT, I CLICK ON UNLOCK AND PHONE PROCESSING TO UNLOCK. HOWEVER imlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 50506F Simlock[2,1] State: CLOSED Type: MCC-MNC Data: 50599F Simlock[3,1] State: CLOSED Type: MCC-MNC Data: 50506F Simlock[4,1] State: CLOSED Type: MCC-MNC Data: 50599F Simlock[5,1] State: CLOSED Type: MCC-MNC Data: 00101F Simlock[6,1] State: CLOSED Type: MCC-MNC Data: 00101F Reading Security Block... Security block OK! Determining PA Simlock... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5 Flashbus Write baud set to 4.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89 APE Boot skipped on user request Restarting MCU... Determined PA Simlock: PA_SL Checking for Rootkey Hash support... Restarting MCU... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Exploiting - running preloader... Preloader running OK, Running Custom Loader... Custom loader running OK! Working... Received Security Block OK ! Writing Security Block... BB5 Unlock Failed -> Phone not detected (FBUS) THE REASON IS PHONE IS NOT STABLE ON LOCAL MODE SO IT CAN NOT UNLOCK ANYMORE. PLEASE HELP ME ANY IDEA THANKS TOMMY[/QUOT Bro,Try to change the value of BSI on TMA adaptor.If the phone can not go into local mode,you can't unlock it.[ or remove camera and try again] |
thank you! I did change TMA adaptor, however local mode is still not come up. WHY IT SO HARD TO GET LOCAL MODE FOR NOKIA N95 AND Nokia N95 8GB? I GOT ANYTHING ( TX2 ADAPTOR + TMA ADAPTOR+ GOOD 7 PIN CABLE), HOWEVER I CAN NOT UNLOCK THESE PHONE WITH CYCLONE . ANY IDEA OR ANY SOLUTION TO GET LOCAL EASIER. THANK YOU |
Is the version of the TMA adapter with the USB cable? is this cable connected to a free usb port of your computer or to a good powered hub or t a good USB charger? Are you kepint the dummy battery and the mobile well fit each other using an elastic band or some other system?. BR Alex |
yes, TMA adaptor come with USB. do I need connect this usb to computer? What you meant: " Are you kepint the dummy battery and the mobile well fit each other using an elastic band or some other system?." ----> I really not understand these. Please expalain for me. thank you Tommy |
Wait for update cyclone box:rolleyes: |
Quote:
If you connect it to the computer you will see immediately the difference.. about keep the dummy battery and mobile weel fit each other is to prevent the fbus moving and giving you a bad contact. retry please and post results. BR Alex |
Quote:
I always use my homemade TMA adaptor and never failed an unlock or flash.. Thread : http://forum.gsmhosting.com/vbb/showthread.php?t=747969 BR Alex |
thats very simple its really common problem ure cable is not ok it identifies ok but cannot unlock or flash the phone change ure cable problem will b solved insh***** |
Connect the TMA USB cable to computer and change the dip switch to 5.1k,then it will go to local mode. |
test whith power the box or the phone y have same problem whit mt-box..... |
for newer Rapido i recommend...with TMA external Power or Modification Inside for usb power |
| All times are GMT +1. The time now is 15:47. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -