Error sending bootloader ! hti 3.5 1.6 (ANSWERED) - GSM-Forum

canliyayin · 12-15-2011, 12:23

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C083xx
Using device: HTI, FW ver: 00.50, SN: 0000B3EE
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13672(13-12-2011)
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
Error sending bootloader ! 3 model some problem chande imei but some plss mx key team

canliyayin · 12-17-2011, 08:07

mr manole always dct4 Error sending bootloader ! plss

specta · 12-17-2011, 09:36

do sync file bro... it works for me, hope it will work for u too...

good luck bro

br

canliyayin · 12-17-2011, 09:44

some problem Error sending bootloader ! pls new update manole

Shani3 · 12-17-2011, 09:47

some problem

http://forum.gsmhosting.com/vbb/f550...oting-1399937/

canliyayin · 12-19-2011, 08:12

dct4 Error sending bootloader !12-15-11, 13:23 plss mxkey team

canliyayin · 12-20-2011, 12:52

dct4 Error sending bootloader !solution mx key team I'm waiting for

gbluez · 12-21-2011, 06:34

what is the phone condition?
nothing wrong here. tried on my pc.

just make sure your mini usb cable is good, plugged directly to pc without any hub

BR

canliyayin · 12-21-2011, 07:45

dct4 series boot problem imei repair flashin boot problem plss dct4 update xgold bb5 no problem

realtech · 12-21-2011, 10:56

Add the firmware folder correctly for the particular mobile also choose dct 4 & check the cable

paartheepan · 12-21-2011, 11:08

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 2], SN: C0858B15
Using device: HTI, FW ver: 00.50, SN: 000074DD
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13672(13-12-2011)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
Bad contact, TX line remains low !
VCC_PH BSI TX RX RX2 CLK
1 0 0 1 1 0
ERROR: bootstrap failed!

specta · 12-21-2011, 13:33

Quote:

Originally Posted by paartheepan

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 2], SN: C0858B15
Using device: HTI, FW ver: 00.50, SN: 000074DD
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13672(13-12-2011)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
Bad contact, TX line remains low !
VCC_PH BSI TX RX RX2 CLK
1 0 0 1 1 0
ERROR: bootstrap failed!

not connected properly or cable problem, try to change it...

good luck bro

br

canliyayin · 12-21-2011, 13:44

bro some models hwk flashed some models jaf imei repair but hti boot error plss manole update dct4 Synchronize Files

canliyayin · 12-22-2011, 13:51

plss manole update dct4 Synchronize Files

canliyayin · 12-23-2011, 07:12

plss manole update dct4 Synchronize Files

12-15-2011, 12:23	#1 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	Error sending bootloader ! hti 3.5 1.6 (ANSWERED) MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C083xx Using device: HTI, FW ver: 00.50, SN: 0000B3EE Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.0.0 Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13672(13-12-2011) ASIC ID: 0x2292 [UPPCosto ver: 1.3] Error sending bootloader ! 3 model some problem chande imei but some plss mx key team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
DES key Driver	black	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	02-08-2014 04:50
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

12-17-2011, 08:07	#2 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	mr manole always dct4 Error sending bootloader ! plss

12-17-2011, 09:36	#3 (permalink)
specta No Life Poster Join Date: Oct 2009 Posts: 1,130 Member: 1149800 Status: Offline Thanks Meter: 211	do sync file bro... it works for me, hope it will work for u too... good luck bro br

12-17-2011, 09:44	#4 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	some problem Error sending bootloader ! pls new update manole

12-17-2011, 09:47	#5 (permalink)
Shani3 No Life Poster Join Date: May 2011 Location: KPK Mardan Age: 36 Posts: 2,642 Member: 1582572 Status: Offline Sonork: 100.1609641 Thanks Meter: 573	some problem http://forum.gsmhosting.com/vbb/f550...oting-1399937/

12-19-2011, 08:12	#6 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	dct4 Error sending bootloader !12-15-11, 13:23 plss mxkey team

12-20-2011, 12:52	#7 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	dct4 Error sending bootloader !solution mx key team I'm waiting for

12-21-2011, 06:34	#8 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	what is the phone condition? nothing wrong here. tried on my pc. just make sure your mini usb cable is good, plugged directly to pc without any hub BR

12-21-2011, 07:45	#9 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	dct4 series boot problem imei repair flashin boot problem plss dct4 update xgold bb5 no problem

12-21-2011, 10:56	#10 (permalink)
realtech Freak Poster Join Date: Apr 2009 Posts: 302 Member: 1003310 Status: Offline Thanks Meter: 28	Add the firmware folder correctly for the particular mobile also choose dct 4 & check the cable

12-21-2011, 11:08	#11 (permalink)
paartheepan Junior Member Join Date: Dec 2009 Posts: 11 Member: 1187748 Status: Offline Sonork: j.a.f Thanks Meter: 4	MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 2], SN: C0858B15 Using device: HTI, FW ver: 00.50, SN: 000074DD Connection status: UHCI:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.0.0 Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13672(13-12-2011) ERROR: Packet Error(0xAA), code 0xC0000002 ERROR: Packet Error(0xAA), code 0xC0000002 Error details: Bad contact, TX line remains low ! VCC_PH BSI TX RX RX2 CLK 1 0 0 1 1 0 ERROR: bootstrap failed!

12-21-2011, 13:44	#13 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	bro some models hwk flashed some models jaf imei repair but hti boot error plss manole update dct4 Synchronize Files

12-23-2011, 07:12	#15 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	plss manole update dct4 Synchronize Files