pay attention here if you flash your DB2020 - GSM-Forum

mutualmobile · 11-23-2006, 04:29

hi, vevery one, i just got one W850i with white screen problem, then i just simply flash it with Cruiser (chiense file) and customize (pay 3 USD). then the phone looks working fine, but one day after, customer came back said white screen again, i thought that must be customer misused, then i flashed the phone again (pay 3 USD) and i tested the phone by myself for a day, the next morning i change another sim card then the phone goes to white screen again.
what's wrong with it? is that the way making money by Cruiser? flash one time we have to pay 3 USD. i can't afford to flash one phone for many times. and i am losing money

.

mccm · 11-23-2006, 05:02

hehehehe ,why lose money went ppl making out of it .we can flash 10 times by logs w/o losing .

you charged usd 4,5,6,7,8 ,hehehehehehe

go back to school .

Mainboard · 11-23-2006, 13:36

this looks like hw damage of phone... rehot phone with hot air + flux

irfan99 · 11-23-2006, 18:26

on changing sim please 1st of all swich off the phone and then remove the battery if you remove battery from on set so it might go to white screen

cruiserloginfo · 11-23-2006, 19:36

For DB2020 phones, please do not take out the battery at once after you off the phone, or the phone might be dead with red light blinking on the power switch.

luzer · 11-23-2006, 20:56

Did you upgrade the EROM?

gyuszko · 11-23-2006, 22:09

Quote:

Originally Posted by cruiserloginfo

For DB2020 phones, please do not take out the battery at once after you off the phone, or the phone might be dead with red light blinking on the power switch.

it's true to almost all phones (e.g. nokia phones sometimes get contact service or symbian based contact retailer, siemens are getting "bzzzz...") becouse phone FW needs some seconds to save all current tasks to flash and when it's not done (removed battery without switch off) some "trash" data could left in memory.

mutualmobile · 11-23-2006, 23:22

today i flashed the phone again, and just making few calls, the phone goes with white screen, and just freeze, i have to take off battery, otherwise the phone will just stay white. after insert battery again, the phone was white screen. i doubt it has hardware problem, but i do not have service manual. can any one give the service manual for DB2020 phone?

Mainboard · 11-24-2006, 00:08

read post that I wrote before and follow my instructions

artur223 · 11-24-2006, 00:31

Quote:

Originally Posted by mutualmobile

hi, vevery one, i just got one W850i with white screen problem, then i just simply flash it with Cruiser (chiense file) and customize (pay 3 USD). then the phone looks working fine, but one day after, customer came back said white screen again, i thought that must be customer misused, then i flashed the phone again (pay 3 USD) and i tested the phone by myself for a day, the next morning i change another sim card then the phone goes to white screen again.
what's wrong with it? is that the way making money by Cruiser? flash one time we have to pay 3 USD. i can't afford to flash one phone for many times. and i am losing money

.

i had same problem, fone was blinking white, i flashed it 3 time and still same,

mutualmobile · 11-24-2006, 00:57

hi, mainboard, i know rehoting phone might be help for resoldering some legs of chips, but there is also risky of killing phone if we do not rehot the board probably. but thanks for your suggestion.

Siemens man · 12-26-2006, 23:22

i have same problem........... 4 times flashing after white screen. help me. how to flash and never come back white screen. need solution
thanks a lot

Siemens man · 12-26-2006, 23:23

hi man
tell me your instruction?
thanks a lot

Quote:

Originally Posted by Mainboard

read post that I wrote before and follow my instructions

James-R · 12-26-2006, 23:32

Quote:

Originally Posted by mutualmobile

hi, mainboard, i know rehoting phone might be help for resoldering some legs of chips, but there is also risky of killing phone if we do not rehot the board probably. but thanks for your suggestion.

the phone it dead/not useable now, so what will be different?

br

Siemens man · 01-24-2007, 22:03

hi guys
any one resolve problem????? i have w850 after flash again again wite screen.

11-23-2006, 04:29	#1 (permalink)
mutualmobile Freak Poster Join Date: May 2005 Location: New Zealand Posts: 175 Member: 146818 Status: Offline Thanks Meter: 7	pay attention here if you flash your DB2020 hi, vevery one, i just got one W850i with white screen problem, then i just simply flash it with Cruiser (chiense file) and customize (pay 3 USD). then the phone looks working fine, but one day after, customer came back said white screen again, i thought that must be customer misused, then i flashed the phone again (pay 3 USD) and i tested the phone by myself for a day, the next morning i change another sim card then the phone goes to white screen again. what's wrong with it? is that the way making money by Cruiser? flash one time we have to pay 3 USD. i can't afford to flash one phone for many times. and i am losing money .

11-23-2006, 18:26	#4 (permalink)
irfan99 No Life Poster Join Date: Mar 2006 Location: Pakistan Peshawar Age: 35 Posts: 1,170 Member: 242264 Status: Offline Sonork: 100.1582011 Thanks Meter: 33	hi on changing sim please 1st of all swich off the phone and then remove the battery if you remove battery from on set so it might go to white screen

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
XDA Forum does not alow you to post free solutions stay here if you want a good forum	sweunlockers	Off Topic Zone	1	10-14-2009 20:04
Report here if you succesfully flashed EPOC phones	avroy7	Universalbox	6	11-21-2007 17:55
Pay attention MT can't choose flashes right	ChIcO*GsM	MT-BOX	5	10-05-2006 07:22
if You consider your Self Smart Enough !!! Read This !!!	ronnymirel	Motorola P2k	0	06-06-2005 20:22
you can download T720-to-T720PM-repair-also here if you want	alexzzander	Motorola P2k	8	02-09-2004 03:18

11-23-2006, 05:02	#2 (permalink)
mccm No Life Poster Join Date: Aug 2005 Location: singapore Age: 55 Posts: 2,430 Member: 173565 Status: Offline Thanks Meter: 71	hehehehe ,why lose money went ppl making out of it .we can flash 10 times by logs w/o losing . you charged usd 4,5,6,7,8 ,hehehehehehe go back to school .

11-23-2006, 13:36	#3 (permalink)
Mainboard No Life Poster Join Date: Mar 2008 Posts: 3,995 Member: 25671 Status: Offline Thanks Meter: 719	this looks like hw damage of phone... rehot phone with hot air + flux

11-23-2006, 19:36	#5 (permalink)
cruiserloginfo Freak Poster Join Date: Nov 2006 Location: www.cruiserlogserver.com Posts: 175 Member: 383021 Status: Offline Thanks Meter: 5	For DB2020 phones, please do not take out the battery at once after you off the phone, or the phone might be dead with red light blinking on the power switch.

11-23-2006, 20:56	#6 (permalink)
luzer No Life Poster Join Date: Nov 2003 Location: GT Posts: 2,802 Member: 44659 Status: Offline Thanks Meter: 363	Did you upgrade the EROM?

11-23-2006, 23:22	#8 (permalink)
mutualmobile Freak Poster Join Date: May 2005 Location: New Zealand Posts: 175 Member: 146818 Status: Offline Thanks Meter: 7	today i flashed the phone again, and just making few calls, the phone goes with white screen, and just freeze, i have to take off battery, otherwise the phone will just stay white. after insert battery again, the phone was white screen. i doubt it has hardware problem, but i do not have service manual. can any one give the service manual for DB2020 phone?

11-24-2006, 00:08	#9 (permalink)
Mainboard No Life Poster Join Date: Mar 2008 Posts: 3,995 Member: 25671 Status: Offline Thanks Meter: 719	read post that I wrote before and follow my instructions

11-24-2006, 00:57	#11 (permalink)
mutualmobile Freak Poster Join Date: May 2005 Location: New Zealand Posts: 175 Member: 146818 Status: Offline Thanks Meter: 7	hi, mainboard, i know rehoting phone might be help for resoldering some legs of chips, but there is also risky of killing phone if we do not rehot the board probably. but thanks for your suggestion.

12-26-2006, 23:22	#12 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 46 Posts: 5,798 Member: 3925 Status: Offline Thanks Meter: 22	i have same problem........... 4 times flashing after white screen. help me. how to flash and never come back white screen. need solution thanks a lot

01-24-2007, 22:03	#15 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 46 Posts: 5,798 Member: 3925 Status: Offline Thanks Meter: 22	hi guys any one resolve problem????? i have w850 after flash again again wite screen.