Iphone hardware and software solutions in 24 hrs - Page 421 - GSM-Forum

alexid · 01-25-2018, 18:02

Quote:

Originally Posted by lwkl72

Iphone 7 display work sometimes
I tested lines and found that here damage on l3902
Can anyone help?

i think your lcd problem
dont forget click thanks

alexid · 01-25-2018, 18:04

Quote:

Originally Posted by procompuk

iPhone 6 do not charging 0 amp but tristar, tigris and u1602 are getting very hot no short anywhere near them. Any suggestions?

iPad air 2 touch do not work at all restore do not help but noticed near touch controller on the board component looking like coil is a bit covered in burnt flux cant find schematic anywhere any help will be much appreciated.

Thank You

change u2 ic solve your problem
dont forget click thanks

alexid · 01-25-2018, 18:06

Quote:

Originally Posted by shazatech

Hello everybody .. i m new on this forum . i have a phone A1387 (iphone) .when i turn it on it shows apple logo and stays long on apple logo after this it disappears ,then i need to turn on again ... phone is not working anymore . if any expert guide me , it will be highly appreciated

install itunes go to recovery mode and restore abd update

dont forget click thanks

dave357 · 01-26-2018, 05:19

Quote:

Originally Posted by alexid

online method ......

What is the online method? I have several in lost mode. Lol

Hawy56oo6 · 01-26-2018, 05:28

Quote:

Originally Posted by ThomasMk

iPhone 6s charging port is not working; replace to the working charging port doesn't work on the device itself. What causes the charging port not working on the device?

Check the 5v line is not shorted

Hawy56oo6 · 01-26-2018, 05:31

Quote:

Originally Posted by denner

i have recieve iphone 6s plus touch not function ? where touch ic located?

Show us the components between LCD connector and flex front camera and show us the connector of LCD

sksadly9 · 01-26-2018, 14:19

iphone 5s restore error 14 ( change battery,lcd,cable, after restore same problem )
plz help

l0znet · 01-26-2018, 16:40

Hello,
I have a iphone 6 plus no touch, i allredy change the 2 icºs but still not working. What I found is that all te Voltage are good unless the c2433 c2432 show 1.4 both.( i have change the 2 capacitor but still not working. someone plz help !!!!
https://ibb.co/mrNg9G

yousef agha · 01-26-2018, 20:07

Hello everyone
I have iphone 7 vibration not working anybody know the solution plz

تم الإرسال من RNE-L21 باستخدام Tapatalk

G1mobile repair · 01-30-2018, 23:42

iphone 6 plus, changed meson due to touch disease, now PP5V7_SAGE_AVDDH line is grounded, remove meson and its ok have replaced 3 times and always the same

tarakhail · 02-01-2018, 02:15

Check c1577 for short also check c2414

adfd · 02-01-2018, 12:23

iPhone 6s plus only apple log then restart no recovery only dfu mode when try to restore and update iTunes say error 6 3utool say unable to switch dfu mode to recovery mode i am all ready change original battery,USB data cabale,charging flex but same condition...

alexid · 02-01-2018, 16:24

Quote:

Originally Posted by yousef agha

Hello everyone
I have iphone 7 vibration not working anybody know the solution plz

تم الإرسال من RNE-L21 باستخدام Tapatalk

check vibration connection and change vibration

alexid · 02-01-2018, 16:27

Quote:

Originally Posted by khuram009

hi '
iphone 6s plus tuch problem
any suggestion

Sent from my SM-G935F using Tapatalk

1st change lcd then check light section

alexid · 02-01-2018, 16:30

Quote:

Originally Posted by shahin786

iphone 4s searching by hardwear what can i do???

check besband ic.........................

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All Blackberry Hardware and Software Solution	youssef01	BlackBerry (RIM)	34	11-01-2012 17:31
I need DVD player hardware and software solution site	..::MOBILES::..	GSM Mobile Links	0	04-05-2009 15:49
O2 Hardware and Software solutions	Eagle7	Various	2	04-14-2006 12:47

01-26-2018, 14:19	#6307 (permalink)
sksadly9 Junior Member Join Date: Sep 2010 Posts: 29 Member: 1400091 Status: Offline Thanks Meter: 2	iphone 5s restore error 14 ( change battery,lcd,cable, after restore same problem ) plz help

01-26-2018, 16:40	#6308 (permalink)
l0znet Junior Member Join Date: May 2015 Posts: 18 Member: 2391436 Status: Offline Thanks Meter: 1	Hello, I have a iphone 6 plus no touch, i allredy change the 2 icºs but still not working. What I found is that all te Voltage are good unless the c2433 c2432 show 1.4 both.( i have change the 2 capacitor but still not working. someone plz help !!!! https://ibb.co/mrNg9G

01-26-2018, 20:07	#6309 (permalink)
yousef agha Major Poster Join Date: Sep 2014 Location: baghdad Posts: 35 Member: 2254818 Status: Offline Thanks Meter: 5	Hello everyone I have iphone 7 vibration not working anybody know the solution plz تم الإرسال من RNE-L21 باستخدام Tapatalk

01-30-2018, 23:42	#6310 (permalink)
G1mobile repair Freak Poster Join Date: Nov 2011 Location: County Durham, UK Posts: 358 Member: 1696994 Status: Offline Thanks Meter: 24	iphone 6 plus, changed meson due to touch disease, now PP5V7_SAGE_AVDDH line is grounded, remove meson and its ok have replaced 3 times and always the same

02-01-2018, 02:15	#6311 (permalink)
tarakhail Freak Poster Join Date: Aug 2014 Location: UK Posts: 408 Member: 2240742 Status: Offline Thanks Meter: 76	Check c1577 for short also check c2414

02-01-2018, 12:23	#6312 (permalink)
adfd No Life Poster Join Date: Jul 2013 Location: Nepal,kathmandu Posts: 981 Member: 1988630 Status: Offline Sonork: 100.1684003 Thanks Meter: 312	iPhone 6s plus only apple log then restart no recovery only dfu mode when try to restore and update iTunes say error 6 3utool say unable to switch dfu mode to recovery mode i am all ready change original battery,USB data cabale,charging flex but same condition...