sometimes low power also cause this problem |
Hi Legija could you pls upload a new link thanks |
no need new dll has all required files in it |
HTC Desire not powers on after Resurrection! I have made complete resurrection on HTC Desire, and after that the phone just stays with HTC logo on display and won't power on completly. I try to reflash it, but when i choose Recovery from the Fastboot menu, the phone just vibrates and the HTC logo appears and not going into recovery menu. Any advice? thanx in advance! |
maybe the button cable not assemblet yet :) |
havent downloaded this file but i think it should be same like http://forum.gsmhosting.com/vbb/6343910-post6.html we restore backup.bin http://forum.gsmhosting.com/vbb/6312397-post3.html |
Quote:
|
Quote:
If I try the resurrection again, it will be ok? |
Quote:
|
Problem Solved!!! Desire Unlocked!!! after the repair flash, i unlocked it without problems. thanx for help |
Quote:
i have same problem i have same working phone any pls how to read dump full http://forum.gsmhosting.com/vbb/atta...1&d=1290178043 |
Quote:
|
htc desire restart with htc logo....after resurrection... htc desire restart with htc logo.... phone details... android version 2.2 baseband version32.46.00.320-radio 5.10.05.17.2 bravo puti ship s-on hboot 0.93.0001 microp- 031d touch panal-synt0101 aug-10 2010 17.52.18 image (software) version-2.12.110.2 what i did... the phone come to unlock... i did resurrection with riff ... after that phone hang on... then i write "locked desire 2010610 boot 093" file... when writing that file...jtag manager was "not responding" in the middle of the writing process now the phone restarts with htc logo... i cant use jtag now... because rtck tp is totally damaged... but the phone can go to hboot menu (volume down + power) i update with RUU_Bravo_Froyo_O2_UK_2.14.207.1_Radio_32.44.00.32 U_5.09.05.30_2_release_144166_signed but i got Error[131]:CUSTOMER ID ERROR... i downgrade with RUU_Bravo_HTC_WWE_1.21.405.2_T2_Radio_32.41.00.32U _4.08.00.09_release_137222_signed then i got error = 140:BOOTLOADER VERSION ERROR... how to recover that htc desire? |
Erase but take full backup before and check if your desire is amoled or not to make it with correct files |
havent downloaded this file but i think it should be same like http://forum.gsmhosting.com/vbb/6343910-post6.html we restore backup.bin http://forum.gsmhosting.com/vbb/6312397-post3.html how to recover that htc desire? (volume down + power)go to recover [TUT]Complete upgrading guide(root, unroot, flashing ROM & updates) |
Quote:
|
Quote:
when i try to recover as u said....display shows red triangle exclamation symbol.... |
1 Attachment(s) Quote:
2010/6/10 50H00618 - 18M - D same HW 3 phone can help me how to this |
After Creating gold Card and after i ran RUU i got an error.it stuck at 84% ..85%.And error[110] File open error.i re-downloaded files and tried again but always getting same error.Now it is hang at HTC logo and four Triangle are on every corner of LCD. Check the picture below.Now it can't enter into bootloader mode and i tried to repair it via RIFF Jtag but can't enter into bootloader.Just start and hang at HTC logo with triangles.Earlier it was able to enter into bootloader. http://i54.tinypic.com/2u8h645.jpg sam problem i try to more time pls help me |
i read full flash same phone same hw my is on and enter boot mode but i cant flash i flash phone after 8% error pls help |
you need an golden card |
so how i can reflash phone giving me this errors Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - IGNORED! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Erasing FLASH memory...OK WARNING: Erasing Error (0x24) at 0x07020000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x10520000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x112A0000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x16720000 is Ignored. Erase continues. phone stuck on htc screen. :( please help thanks |
No bootloader on desire after ressurection hi, yesterday i have ressurected a desire with riff. All seems to be good. But when i start the phone, i can't go into bootloder mode. I only see the htc-logo with the 4 triangles with excamation marks in the corners. When i insert the usb cable phone will be detected. when i pull out the usb-cable i get a white screen with some letters like RIFF 0.92001 and other informations. When i put the usb in, i got imediately the screen with the HTC-Logo and the triangles. When i try to flash, it stocks on sending the signatur (probaply on 18%). What can i do? My big problem ist that by desoldering the cables the pad from RTCK is gone. So i don't hope that i must ressurect again :) In this cause i must first search another RTCK-Point :( Can anyone help me? Thanks in advance B.R. Jomafi:D |
new pcb Hi, i have the another probs with new pcb. Resurrection works ok, but unlock give me error PCB: 50H00618-18M-E 2010/7/14 8-4 Im not sure if problem is in wires or with this new pcb. http://77.48.70.182/riff/1.JPG http://77.48.70.182/riff/2.JPG |
HTC desire LCD problem Quote:
I have a desire with SLCD, but after replacing the LCD I found out that I have fitted a AMOLED lcd into the phone, now phone powers on makes all sound but no display, can this be solved? Please can you guide me Thanks |
Of course it can be solved. Replace also phone PCB with older revision so it will have AMOLED hardware support. Or, get a SLCD and don't change the PCB. |
I thought it was something that could be done by software, thanks anyway |
htc desire new flash ic ?? old// Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) new// Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB) Unlocking the Phone...FAILED ERROR: Unlock was not Completed due to Error: 0x39 |
I think NO. Yesterday i unlock white Desire, manifactured 4 weeks ago and sold in T-Mobile Macedonia first time 2 days ago. Check wires, connection. Try on another PC and power of phone also. |
Quote:
does your imei number begin with "35530204xxxxxxx" |
resurrected HTC desire, now won't turn on. Hey guys i resurrected the phone, riff software said everything completed ok, but once i put the phone back together it won't turn on at all. Does nothing what so ever. What should i do???? Thanks! |
after resurrected, flash ruu claudemir |
The computer doesn't seem to recognize it at all. |
Should the computer recognize it with only plugging it in? Or am i overlooking and or thinking to much into it? |
jes imei 3553040204716xxxx |
1 Attachment(s) here is picture /new pcb? |
If ressurection only unlocked after it is full of clues to download full software? :confused: Anyway, I can now only 4-5 pieces vibrate and nothing happens. I hope there will be no briquettes :p |
Then what is the situation now? Does not open anything? I have these 3 pieces |
Did not help me now are two that do not turn on. This has not only unlocked the device is turned off. Do not leave me here now. So I can not give it back!:mad::mad::mad::rolleyes: Deduct someone step by step. Described above does not work!:mad::mad::mad::mad::mad: |
I do not get completely clean Where is jpg file? "3. Set everything exactly like on "restore-original-spl.jpg" ":confused: |
if you have 2 for 1 that works is dead is the same version as the microbox not open it. Draw up your work, what and how to set up?:confused: |
press pwr button and camera, and try to flash Ruu claudemir |
take dump and send it to M.r Legija |
ok! What you need to configure it to the dump? send today! |
Quote:
|
why open a new topic? Just use the search engine. I also have a similar problem! Legija what he says are welcome! :o http://forum.gsmhosting.com/vbb/f634...ction-1141936/ |
Similar thread, different problem. Mine won't turn on at all, complete brick! |
Quote:
|
Quote:
The problem we are not interested in phones that we are working on it and the RIFF Ressurection away after the bricks are? |
Quote:
I know the most common issue was not connecting pin 3 TRST. But unless my solder joint was bad everything was connected properly. Due to some bad luck one of my pads ripped off and i can't re-solder to it. Is there a schematic for the board available anywhere so i can find another pickup point? Thanks |
All times are GMT +1. The time now is 08:45. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -