Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 65 - GSM-Forum

mayank.gupta · 11-17-2011, 18:29

Huawei C5589

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Huawei C5589]

Connecting to the dead body...OK
Detected dead body ID: 0x220B30E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
Settings Code: 0x0C00010002000000000000000024

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x017E/0x2230 (32MB)

Writting FLASH1 memory from 0x0000000000 to 0x0001FFFFFF
Completed in 00:17:59.500 (Average Transfer Rate: 30.35 kB/s)

Badra · 11-17-2011, 20:48

after maNY try i chose tck 8mhz Anfd it done without problem.
I am very happy because i buy Riffbox especially for this phone that is my neighbor phone.
I dead it after flash of i9000.

delchoni · 11-18-2011, 17:14

i9000 galaxy s

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Samsung I9000]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

gb2qaz · 11-18-2011, 20:18

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [QSC60XX L20 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - IGNORED!
Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0000010000800000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)

Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
Completed in 00:02:29.062 (Average Transfer Rate: 54.96 kB/s)

MR KHATRI · 11-19-2011, 10:46

micromax c111 flashing done

ssatcom · 11-19-2011, 11:59

Samaung Galaxy Tab P100 Sprint Successfully done........

Thanks REFF Team....

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Samsung Galaxy Tab]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

MR KHATRI · 11-19-2011, 12:48

inetx in50 flashing done

rea1One · 11-19-2011, 14:03

SO-01b DoCoMo ( Xperia X10 ) unlocked
==============================

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE X10i]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Backup Important Zones...OK
Preparing data. Please wait...OK
Unlocking the Phone...OK
Unlock complete!

Akili Bulent · 11-19-2011, 18:52

i9100 repair ok

[19/11/2011 14:56:33] [START OPERATION_ID = RESURRECT]
[19/11/2011 14:57:43] Open serial port...OK
[19/11/2011 14:57:43] Connecting to the RIFF Box...OK
[19/11/2011 14:57:43] Firmware Version: 1.28, JTAG Manager Version: 1.37
[19/11/2011 14:57:43] Selected Resurrector: [Samsung i9100]
[19/11/2011 14:57:43]
[19/11/2011 14:57:43] Connecting to the dead body...OK
[19/11/2011 14:57:43] Detected dead body ID: 0x4BA00477 - CORRECT!
[19/11/2011 14:57:43] Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz
[19/11/2011 14:57:43]
[19/11/2011 14:57:43] Resurrection sequence started.
[19/11/2011 14:57:43] Establish communication with the phone...OK
[19/11/2011 14:57:43] Initializing internal hardware configuration...OK
[19/11/2011 14:57:43] Uploading resurrector data into memory...OK
[19/11/2011 14:57:43] Starting communication with resurrector...OK
[19/11/2011 14:57:43]
[19/11/2011 14:57:43] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x03AB400000 Bytes)
[19/11/2011 14:57:43]
[19/11/2011 14:57:43] Flashing the dead body...OK
[19/11/2011 14:57:43] Resurrection complete!
[19/11/2011 14:57:43] [FINISH OPERATION_ID = RESURRECT]

Akili Bulent · 11-19-2011, 18:53

i9003 repair ok

[19/11/2011 17:50:21] [START OPERATION_ID = RESURRECT]
[19/11/2011 17:51:22] Open serial port...OK
[19/11/2011 17:51:22] Connecting to the RIFF Box...OK
[19/11/2011 17:51:22] Firmware Version: 1.28, JTAG Manager Version: 1.37
[19/11/2011 17:51:22] Selected Resurrector: [Samsung I9003]
[19/11/2011 17:51:22]
[19/11/2011 17:51:22] Connecting to the dead body...OK
[19/11/2011 17:51:22] Detected dead body ID: 0x0B6D602F - CORRECT!
[19/11/2011 17:51:22] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[19/11/2011 17:51:22] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[19/11/2011 17:51:22]
[19/11/2011 17:51:22] Resurrection sequence started.
[19/11/2011 17:51:22] Establish communication with the phone...OK
[19/11/2011 17:51:22] Initializing internal hardware configuration...OK
[19/11/2011 17:51:22] Uploading resurrector data into memory...OK
[19/11/2011 17:51:22] Starting communication with resurrector...OK
[19/11/2011 17:51:22]
[19/11/2011 17:51:22] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
[19/11/2011 17:51:22]
[19/11/2011 17:51:22] Flashing the dead body...OK
[19/11/2011 17:51:22] Resurrection complete!
[19/11/2011 17:51:22] [FINISH OPERATION_ID = RESURRECT]

sazr · 11-19-2011, 19:17

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Samsung i9100]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x03AB400000 Bytes)

Flashing the dead body...OK
Resurrection complete!

lalitgvarshney · 11-22-2011, 20:40

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Motorola W210]

Connecting to the dead body...OK
Set I/O Voltage reads as 3.00V, TCK Frequency is 4 MHz
Model selected: MOTOROLA - Motorola W210

Detected dead body ID: 0x1F0F0F0F

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Motorola W210]

Halting target...OK
STATUS: Target is halted.

R0 = 0x900F0000 R6 = 0x011E8288 R12 = 0x00000032
R1 = 0x03000600 R7 = 0x00000000 R13 = 0x011FF4D0
R2 = 0x000000AA R8 = 0x00000000 R14 = 0x001CCBB9
R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00017404
R4 = 0x010E4040 R10 = 0x010110C0 CPSR = 0x000000F3
R5 = 0x002A2C08 R11 = 0x00000000

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Motorola W210]

Resetting target...OK
STATUS: Target was already halted.

R0 = 0x900F0000 R6 = 0x011E8288 R12 = 0x00000032
R1 = 0x03000600 R7 = 0x00000000 R13 = 0x011FF4D0
R2 = 0x000000AA R8 = 0x00000000 R14 = 0x001CCBB9
R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00017404
R4 = 0x010E4040 R10 = 0x010110C0 CPSR = 0x000000F3
R5 = 0x002A2C08 R11 = 0x00000000

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Motorola W210]

Connecting to the dead body...OK
Detected dead body ID: 0x1F0F0F0F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8855 (8MB)
Selected Resurrection Data for the NOR Chip with IDs: 0x0089/0x8855

Flashing the dead body...OK
Resurrection complete!

Wbr
lalitg

M0YAL · 11-23-2011, 07:37

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [QSC1100 X14]

Connecting to the dead body...OK
Detected dead body ID: 0x122CE0E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz]
Settings Code: 0x0E00010001000000000000000034

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x882E (16MB)

Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF
Completed in 00:05:25.000 (Average Transfer Rate: 50.41 kB/s)

MR KHATRI · 11-23-2011, 09:28

intex in50 dead recover done

MOHIT_THAREJA · 11-23-2011, 10:04

zte 401 dead recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Nokia 1255]

Connecting to the dead body...OK
Detected dead body ID: 0x1F0F0F0F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is 4 MHz
Settings Code: 0x0009010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x017E/0x220A (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
Completed in 00:01:35.359 (Average Transfer Rate: 42.95 kB/s)

11-19-2011, 11:59	#966 (permalink)
ssatcom No Life Poster Join Date: Oct 2002 Location: Satcom Bangalore INDIA Age: 54 Posts: 911 Member: 17098 Status: Offline Thanks Meter: 51	Sprint P100 Successfully done Samaung Galaxy Tab P100 Sprint Successfully done........ Thanks REFF Team.... Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Samsung Galaxy Tab] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

11-22-2011, 20:40	#972 (permalink)
lalitgvarshney Freak Poster Join Date: Jan 2007 Location: DELHI,INDIA Posts: 376 Member: 427627 Status: Offline Thanks Meter: 160	Motorola W210 sucsessfully recovered Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Motorola W210] Connecting to the dead body...OK Set I/O Voltage reads as 3.00V, TCK Frequency is 4 MHz Model selected: MOTOROLA - Motorola W210 Detected dead body ID: 0x1F0F0F0F Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Motorola W210] Halting target...OK STATUS: Target is halted. R0 = 0x900F0000 R6 = 0x011E8288 R12 = 0x00000032 R1 = 0x03000600 R7 = 0x00000000 R13 = 0x011FF4D0 R2 = 0x000000AA R8 = 0x00000000 R14 = 0x001CCBB9 R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00017404 R4 = 0x010E4040 R10 = 0x010110C0 CPSR = 0x000000F3 R5 = 0x002A2C08 R11 = 0x00000000 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Motorola W210] Resetting target...OK STATUS: Target was already halted. R0 = 0x900F0000 R6 = 0x011E8288 R12 = 0x00000032 R1 = 0x03000600 R7 = 0x00000000 R13 = 0x011FF4D0 R2 = 0x000000AA R8 = 0x00000000 R14 = 0x001CCBB9 R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00017404 R4 = 0x010E4040 R10 = 0x010110C0 CPSR = 0x000000F3 R5 = 0x002A2C08 R11 = 0x00000000 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Motorola W210] Connecting to the dead body...OK Detected dead body ID: 0x1F0F0F0F - CORRECT! Set I/O Voltage reads as 3.00V, TCK Frequency is 4 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8855 (8MB) Selected Resurrection Data for the NOR Chip with IDs: 0x0089/0x8855 Flashing the dead body...OK Resurrection complete! Wbr lalitg

11-23-2011, 07:37	#973 (permalink)
M0YAL No Life Poster Join Date: May 2011 Location: india Posts: 1,679 Member: 1583254 Status: Offline Sonork: 100.1602320 Thanks Meter: 4,792	ZTE C160 Dead Recover Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [QSC1100 X14] Connecting to the dead body...OK Detected dead body ID: 0x122CE0E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz] Settings Code: 0x0E00010001000000000000000034 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x882E (16MB) Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF Completed in 00:05:25.000 (Average Transfer Rate: 50.41 kB/s)

11-17-2011, 18:29	#961 (permalink)
mayank.gupta No Life Poster Join Date: Feb 2009 Posts: 845 Member: 966792 Status: Offline Sonork: 100.1602610 Thanks Meter: 199	Huawei C5589 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Huawei C5589] Connecting to the dead body...OK Detected dead body ID: 0x220B30E1 - IGNORED! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Settings Code: 0x0C00010002000000000000000024 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x017E/0x2230 (32MB) Writting FLASH1 memory from 0x0000000000 to 0x0001FFFFFF Completed in 00:17:59.500 (Average Transfer Rate: 30.35 kB/s)

11-18-2011, 17:14	#963 (permalink)
delchoni No Life Poster Join Date: Mar 2006 Location: Bulgaria Asenovgrad Age: 42 Posts: 3,197 Member: 239176 Status: Offline Sonork: 100.1602815 Thanks Meter: 851	i9000 galaxy s Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Samsung I9000] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

11-18-2011, 20:18	#964 (permalink)
gb2qaz No Life Poster Join Date: Jan 2007 Posts: 582 Member: 441202 Status: Offline Thanks Meter: 120	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [QSC60XX L20 D08] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - IGNORED! Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x0000010000800000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB) Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF Completed in 00:02:29.062 (Average Transfer Rate: 54.96 kB/s)

11-19-2011, 10:46	#965 (permalink)
MR KHATRI Freak Poster Join Date: Dec 2008 Location: india jodhpur Posts: 202 Member: 922365 Status: Offline Thanks Meter: 32	micromax c111 flashing done

11-19-2011, 12:48	#967 (permalink)
MR KHATRI Freak Poster Join Date: Dec 2008 Location: india jodhpur Posts: 202 Member: 922365 Status: Offline Thanks Meter: 32	inetx in50 flashing done

11-19-2011, 14:03	#968 (permalink)
rea1One No Life Poster Join Date: Feb 2006 Location: EDSELLULAR Posts: 1,569 Member: 236564 Status: Offline Sonork: 100.1667122 Thanks Meter: 816	SO-01b DoCoMo ( Xperia X10 ) unlocked ============================== Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [SE X10i] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Backup Important Zones...OK Preparing data. Please wait...OK Unlocking the Phone...OK Unlock complete!

11-19-2011, 18:52	#969 (permalink)
Akili Bulent Freak Poster Join Date: Feb 2005 Location: Paris Age: 47 Posts: 239 Member: 113924 Status: Offline Thanks Meter: 29	i9100 repair ok [19/11/2011 14:56:33] [START OPERATION_ID = RESURRECT] [19/11/2011 14:57:43] Open serial port...OK [19/11/2011 14:57:43] Connecting to the RIFF Box...OK [19/11/2011 14:57:43] Firmware Version: 1.28, JTAG Manager Version: 1.37 [19/11/2011 14:57:43] Selected Resurrector: [Samsung i9100] [19/11/2011 14:57:43] [19/11/2011 14:57:43] Connecting to the dead body...OK [19/11/2011 14:57:43] Detected dead body ID: 0x4BA00477 - CORRECT! [19/11/2011 14:57:43] Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz [19/11/2011 14:57:43] [19/11/2011 14:57:43] Resurrection sequence started. [19/11/2011 14:57:43] Establish communication with the phone...OK [19/11/2011 14:57:43] Initializing internal hardware configuration...OK [19/11/2011 14:57:43] Uploading resurrector data into memory...OK [19/11/2011 14:57:43] Starting communication with resurrector...OK [19/11/2011 14:57:43] [19/11/2011 14:57:43] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x03AB400000 Bytes) [19/11/2011 14:57:43] [19/11/2011 14:57:43] Flashing the dead body...OK [19/11/2011 14:57:43] Resurrection complete! [19/11/2011 14:57:43] [FINISH OPERATION_ID = RESURRECT]

11-19-2011, 18:53	#970 (permalink)
Akili Bulent Freak Poster Join Date: Feb 2005 Location: Paris Age: 47 Posts: 239 Member: 113924 Status: Offline Thanks Meter: 29	i9003 repair ok [19/11/2011 17:50:21] [START OPERATION_ID = RESURRECT] [19/11/2011 17:51:22] Open serial port...OK [19/11/2011 17:51:22] Connecting to the RIFF Box...OK [19/11/2011 17:51:22] Firmware Version: 1.28, JTAG Manager Version: 1.37 [19/11/2011 17:51:22] Selected Resurrector: [Samsung I9003] [19/11/2011 17:51:22] [19/11/2011 17:51:22] Connecting to the dead body...OK [19/11/2011 17:51:22] Detected dead body ID: 0x0B6D602F - CORRECT! [19/11/2011 17:51:22] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK [19/11/2011 17:51:22] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [19/11/2011 17:51:22] [19/11/2011 17:51:22] Resurrection sequence started. [19/11/2011 17:51:22] Establish communication with the phone...OK [19/11/2011 17:51:22] Initializing internal hardware configuration...OK [19/11/2011 17:51:22] Uploading resurrector data into memory...OK [19/11/2011 17:51:22] Starting communication with resurrector...OK [19/11/2011 17:51:22] [19/11/2011 17:51:22] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) [19/11/2011 17:51:22] [19/11/2011 17:51:22] Flashing the dead body...OK [19/11/2011 17:51:22] Resurrection complete! [19/11/2011 17:51:22] [FINISH OPERATION_ID = RESURRECT]

11-19-2011, 19:17	#971 (permalink)
sazr No Life Poster Join Date: Nov 2005 Posts: 979 Member: 203352 Status: Offline Sonork: 100.1609650 Thanks Meter: 244	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Samsung i9100] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x03AB400000 Bytes) Flashing the dead body...OK Resurrection complete!

11-23-2011, 09:28	#974 (permalink)
MR KHATRI Freak Poster Join Date: Dec 2008 Location: india jodhpur Posts: 202 Member: 922365 Status: Offline Thanks Meter: 32	intex in50 dead recover done

11-23-2011, 10:04	#975 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,262 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	zte 401 dead recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Nokia 1255] Connecting to the dead body...OK Detected dead body ID: 0x1F0F0F0F - CORRECT! Set I/O Voltage reads as 3.00V, TCK Frequency is 4 MHz Settings Code: 0x0009010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x017E/0x220A (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF Completed in 00:01:35.359 (Average Transfer Rate: 42.95 kB/s)