Dragon box Pinfinding Problem Solved Check out ! - Page 6 - GSM-Forum

sweet4hamza · 01-11-2012, 11:20

connect me on yahoo, skype or sonork i shall solve you problem

ecneretnecid · 01-11-2012, 15:03

about the multi tester

what is the settins to be use?

ohm meter? acV meter?

dcV meter or (A) amper meter?

plz response

TIA

sweet4hamza · 01-11-2012, 18:32

Quote:

Originally Posted by ecneretnecid

about the multi tester

what is the settins to be use?

ohm meter? acV meter?

dcV meter or (A) amper meter?

plz response

TIA

the meter that you use for mobiles

yawarniazi · 01-12-2012, 06:45

Quote:

Originally Posted by akadhitz

The Phone is MTK...

when you press power on,
no phone detected.

the phone is OK and can detect easily w/ other box but it can,t detect on GPGdragon.
I tried also with many phones.

for old box of gpg do the process connect usb cable and put your meter point to + and _ several time the lights are blinking some time light of box one blink some time 2nd light blink some time third light blink and you also heara the beep this is for old box who did not find the pins
do the prosses 7 to 8 times after that upgrade firmware 1.58 without connect +ve and _ve wires dont forget to say ?

dubai@mobile · 01-12-2012, 08:29

good work faheem anjum very nice ...........thanks

shivashakthi · 01-12-2012, 10:02

I didn't hear any beep when i connect multitester.

what is the A-B connector.

witch Multitester v can use Digital Multiteste or Analog Multitester and off mode or on mode

images2.jpeg

images.jpeg

sweet4hamza · 01-12-2012, 10:06

use any Digital Multiteste or Analog Multitester and on mode

shivashakthi · 01-12-2012, 10:16

what is the A-B connector........?

misterG · 01-12-2012, 10:32

Quote:

Originally Posted by shivashakthi

what is the A-B connector........?

That is usb cable box to usb computer.

kachman · 01-12-2012, 13:06

hi, my box doesnt detect pinout (rx tx) of some phones, especially mt6252 phones, and esp. those that use microUSB connector. very few are detected.

will this solution solve the problem

aermacchi · 01-13-2012, 06:55

Quote:

Originally Posted by shivashakthi

what is the A-B connector........?

here is the image of A-B connector

Quote:

Originally Posted by ecneretnecid

about the multi tester

what is the settins to be use?

ohm meter? acV meter?

dcV meter or (A) amper meter?

plz response

TIA

set your multimeter to x1 in ohm reading....

hope it will solve your problem

thanks,

br,
aermacchi

REDZTER · 01-14-2012, 05:14

Before I use 2.10 version exe with firmware box 1.58 my box is OK

but after I update to 1.59 using 2.11 exe my box now can't read any Unit.

Until now i can't repair my box

Or maybe box is dead ? it's very bad GPG team.

REDZTER · 01-14-2012, 05:28

Before I use 2.10 version exe with firmware box 1.58 my box is OK

but after I update to 1.59 using 2.11 exe my box now can't read any Unit.

Until now i can't repair my box

Or maybe box is Dead Its very bad GPG team...

Why my post deleted Sir ?

REDZTER · 01-14-2012, 05:45

GPG team Please make Solution about this, I already ask my Reseller didn't concede this box because this not the under warranty.

Hoping for your consideration GPG team.

raezak · 01-14-2012, 11:17

maybe my gpg box also damage after updating 1.59 now cant detect any phone ..

br

01-12-2012, 10:02	#81 (permalink)
shivashakthi No Life Poster Join Date: Sep 2007 Posts: 985 Member: 594753 Status: Offline Sonork: 100.1605626 Thanks Meter: 822	witch Multitester v can use Digital Multiteste or Analog Multitester I didn't hear any beep when i connect multitester. what is the A-B connector. witch Multitester v can use Digital Multiteste or Analog Multitester and off mode or on mode images2.jpeg images.jpeg

01-12-2012, 10:16	#83 (permalink)
shivashakthi No Life Poster Join Date: Sep 2007 Posts: 985 Member: 594753 Status: Offline Sonork: 100.1605626 Thanks Meter: 822	what is the A-B connector. what is the A-B connector........?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-16-2013 08:16
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
Silly question!! Why is it impossible to read out the mastercode of Nokia phones????	MyKe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-26-1999 14:31
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

01-11-2012, 11:20	#76 (permalink)
sweet4hamza No Life Poster Join Date: Nov 2010 Location: Atif mobile,goal, faisalabad Posts: 12,041 Member: 1434736 Status: Offline Sonork: 100.1607275 Thanks Meter: 5,377	connect me on yahoo, skype or sonork i shall solve you problem

01-11-2012, 15:03	#77 (permalink)
ecneretnecid Insane Poster Join Date: Jul 2008 Posts: 74 Member: 812328 Status: Offline Thanks Meter: 23	about the multi tester what is the settins to be use? ohm meter? acV meter? dcV meter or (A) amper meter? plz response TIA

01-12-2012, 08:29	#80 (permalink)
dubai@mobile Freak Poster Join Date: Jan 2012 Location: pakistan dubai Posts: 416 Member: 1711454 Status: Offline Sonork: 100.1605681 Thanks Meter: 60	good work faheem anjum very nice ...........thanks

01-12-2012, 10:06	#82 (permalink)
sweet4hamza No Life Poster Join Date: Nov 2010 Location: Atif mobile,goal, faisalabad Posts: 12,041 Member: 1434736 Status: Offline Sonork: 100.1607275 Thanks Meter: 5,377	use any Digital Multiteste or Analog Multitester and on mode

01-12-2012, 13:06	#85 (permalink)
kachman No Life Poster Join Date: May 2006 Location: zambia Posts: 1,555 Member: 272581 Status: Offline Thanks Meter: 118	hi, my box doesnt detect pinout (rx tx) of some phones, especially mt6252 phones, and esp. those that use microUSB connector. very few are detected. will this solution solve the problem

01-14-2012, 05:14	#87 (permalink)
REDZTER Freak Poster Join Date: May 2008 Location: biejing Posts: 308 Member: 782416 Status: Offline Sonork: **** Thanks Meter: 81	Before I use 2.10 version exe with firmware box 1.58 my box is OK but after I update to 1.59 using 2.11 exe my box now can't read any Unit. Until now i can't repair my box Or maybe box is dead ? it's very bad GPG team.

01-14-2012, 05:28	#88 (permalink)
REDZTER Freak Poster Join Date: May 2008 Location: biejing Posts: 308 Member: 782416 Status: Offline Sonork: **** Thanks Meter: 81	Before I use 2.10 version exe with firmware box 1.58 my box is OK but after I update to 1.59 using 2.11 exe my box now can't read any Unit. Until now i can't repair my box Or maybe box is Dead Its very bad GPG team... Why my post deleted Sir ?

01-14-2012, 05:45	#89 (permalink)
REDZTER Freak Poster Join Date: May 2008 Location: biejing Posts: 308 Member: 782416 Status: Offline Sonork: **** Thanks Meter: 81	GPG team Please make Solution about this, I already ask my Reseller didn't concede this box because this not the under warranty. Hoping for your consideration GPG team.

01-14-2012, 11:17	#90 (permalink)
raezak No Life Poster Join Date: Apr 2006 Location: Badong's Junkshop Posts: 2,749 Member: 260632 Status: Offline Thanks Meter: 639	maybe my gpg box also damage after updating 1.59 now cant detect any phone .. br