DTC: GT5s after read in gpgdragon. now dead plz help..
 

My *******r came at my shop and she showed me her DTC GT5s has a password. So for me to make sure i read the firmware of the phone to make sure it safe just in case there is something happen informating " format the user data ", but it gives me headache . after read flash firmware successfully the phone won't power up . i tried to restore the backup firmware that i read but it has a error ..

i've search there a lot who success format the dtc gt5s but at d same time i want to collect a flash file but now here a have a big problem

this is not the first time i face this issue last week i read the firmware of cherry mobile spark and i became dead after reading but i successfully revive it in researchdownload sprd flasher and the .pac file

here is the pic of phone
http://4.bp.********.com/-q4TiX9r3YO...nd%2BSpecs.JPG

>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:7,
Signal Pin:1, 3, 4, 5,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:4 D-:3
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM16
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:0000ECBC
Flash Size:20000000->512M
Flash Name:NAND_SamSungK9K4G16Q0M
CPU Name:6820/8810
>>> -Analyzing Flash File...
Get Flash Format: User Read Full Flash...
Flash Size:0X1FFE0000->511M
>>> Decompressing file...
NV_ADD :0x00C84800 SIZE: 0x0000D1B0
SPL_ADD :0x00000000 SIZE: 0x00042000
UBOOT_ADD :0x00000000 SIZE: 0x00063EFC
VMG_ADD :0x001C0000 SIZE: 0x0003D000
MODEM_ADD :0x00240000 SIZE: 0x003C3DC2
DSP_ADD :0x013C0000 SIZE: 0x001E0000
BOOT_IMG_ADD:0x01C80000 SIZE: 0x006A7800
REC_IMG_ADD :0x02680000 SIZE: 0x006A9800
SYSTEM_ADD :0x03080000 SIZE: 0x08365800
USER_ADD :0x1ABE8000 SIZE: 0x00000800
BOOTLOGO_ADD:0x00000000 SIZE: 0x01000000
Special remind:if you tick the system,maybe it will kill your phone!!!

Waiting For Your Confirmation...
>>> Writing Flash File...
Write_UBOOT...
Write_VMG...
Write_MODEM...
Write_DSP...
Write_BOOT_IMG...
Write_REC_IMG...
Write_SYSTEM...
>>> Return DATA Error!!!
Terminated...



i have the backup could any one can extract the reade file from gpg to Pac file to flash it to researchdownload sprd flasher andriod


plz help me thanks..

After Error Mobile Hand or logo or full dead?

and please try to upload your flash file

yes full dead sir is there any way for me to revive this fone

i am uploading now but my internet connection is a bit slow so i think i can upload it tomorow its 512mb ...

gpg...

a request on your next update...

could you include bin to pac convert on dragon?

it is hard for us slow internet users to upload such big files..

thanks :)

here is the firmware the i read DTC GT5s

here is the solution:

http://forum.gsmhosting.com/vbb/10017066-post12.html




Reading file device never dies, check:


Reading from ADB method:

http://forum.gsmhosting.com/vbb/f646...leted-1766246/


Reading from USB Method:

http://forum.gsmhosting.com/vbb/f646...-11-a-1766736/


BR
Dipendra Pathak

i know its my fault to not knowing that new procedure of reading a firmware of android phone. cause not all the time i am reading an update i am very busy in some other things. i only searching if i'm on the real scenario
so here is my problem now it's already dead sir so i'll ask for a help in dragon support to fix it i only read backup .and it became dead. so i am asking now for a help to revive it not to blame anybody here ..


can someone extract the .bin file to .pac file

i already uploaded the firmware ..



thanks hope u can help solve this

i am waiting for solution gpg dragon support




thanks.........

Come on gpg support i am waiting for reply this few days have past you don't reply




thanks

i aso need help
 

before adb read option i dead wham ws35 i have backup file

plz conert to pac file

here my readed file

WHAM_ws35 20131209_202004_FullFlash - Download - 4shared

plz sir ......

plz convert bin to pac file plz plz plz

where you face problem in convert bin file to pac file

post here screen shot

gud day sir

i upload my backup firmware here because i don't have a software to convert my backup .bin file to .pac file so is there any way that the dragon support or any third party software creator can provide us this software, so that we can extract the bin file and convert it in the .pac file so that we can flash it to the researchdownload sprd flasher andriod software


there is a lot of thread here in other forum that encounter this situation like mine. by only reading the backup file to make sure it is safe to format but the other way went wrong and the phone became dead ..

by reading the backup in gpg dragon it will erase the partition of the phone what the hell ..i thought only flashing and formatting can make the phone dead so i don't mind considering i will be dead after read backup


gpg dragon this is your responsibility to help me revive this phone

i admit its my fault to not read your updates thread of the new procedure..
but in other hand it is your product that i used so please i am waiting for a good news ...


@ you ask me to upload the file sir so i uploaded you give me hope and . its done but you leave me behind after that..


you don't reply anything i don't know if you are working on it or not....



sorry for being so rude right now i'm so very eager to have a solution for this right now

here is in my mind what if i encounter this again into other kind of phone. will i tell to my *******r there is no solution yet so take this phone and punch me in the face to make it fare is that what you want me to do. or would you say to me go to the product seller and ask them for a factory firmware .