Problem unlock 7230 - GSM-Forum

outbreak198x · 05-08-2011, 12:53

Hello Problem reading SL3 Log info for 7230 - JAF and UFS always error

Connecting to UFS3 SarasSoft #2 (SN

UFxBoot V2.2 (c) SarasSoft 2003
UFS_USB V2.8 (c) SarasSoft 2007
Connected to UFS interface.
Connection interface is set to UFS now.
Job's finished successfully!
SL3 Unlocking started
Setting flash mode
Reading CMT boot data...
CMT Boot Data
--------------
Asic ID : 000000010000022600000001020C192102044100
Public ID : 07300110059D544055C20FE2A09DD78AF142DA10
Hash : 7B045400E1752022F9EB80B0DEA9C65D
Hardware ID: 020C192102044100
Sending 2ND...
Cannot initialize booting 2ND
Job's finished with errors!

el-polaco · 05-08-2011, 15:55

try with cable with 2 m-bus conector.

I unlocked just today a 7230 with SLAP 2.3 Perfect

http://www.4shared.com/photo/pv5CgNY...spaa_Feni.html

B/R

The_polack

outbreak198x · 05-08-2011, 16:31

i tried ufs universal cable also the same, it wont go into local mode - also flashed new sw over usb - read info over fbus is no problem

bagalan2 · 05-08-2011, 19:44

Quote:

Originally Posted by outbreak198x

Hello Problem reading SL3 Log info for 7230 - JAF and UFS always error

Connecting to UFS3 SarasSoft #2 (SN

UFxBoot V2.2 (c) SarasSoft 2003
UFS_USB V2.8 (c) SarasSoft 2007
Connected to UFS interface.
Connection interface is set to UFS now.
Job's finished successfully!
SL3 Unlocking started
Setting flash mode
Reading CMT boot data...
CMT Boot Data
--------------
Asic ID : 000000010000022600000001020C192102044100
Public ID : 07300110059D544055C20FE2A09DD78AF142DA10
Hash : 7B045400E1752022F9EB80B0DEA9C65D
Hardware ID: 020C192102044100
Sending 2ND...
Cannot initialize booting 2ND
Job's finished with errors!

plz show time to complet or ......% plz

outbreak198x · 05-08-2011, 22:45

Why i should show you the time, i can't calculate the code, because i can't read out data i need!

But i reach about 3400M h/s, if you want to know... (one 5970)

outbreak198x · 05-12-2011, 17:37

still same problem - any ideas?

Cingrular · 05-12-2011, 17:43

Quote:

Originally Posted by outbreak198x

still same problem - any ideas?

Try to search pinout then modify your cable, i think it must work .

outbreak198x · 05-12-2011, 17:47

but i tried all BSI on UFC Cable, and also bought Fbus Cable.... - and it just flicker white, and reboots, but i can read out info with UFS and HWK Soft?

SJS · 05-12-2011, 18:16

Maybe , problem is in phone. Have 1 here, have read log without problem, and 2. phone same sw version, not possible. Problem can only be in phone, not in cable!!

SJS · 05-12-2011, 18:45

Edit: Have modifyed my cable now, and 2. phone was readed also. But 1. phone without modification!!

EuropaGsm · 05-13-2011, 09:29

Have correct Pinout for UFC universal Fbus?
Regards.

outbreak198x · 01-07-2012, 01:10

Hello,

For a few month - you update fenix Software because ID was not supported for 7230 - now same case - maybe you can add ID again?

SL3 Unlocking started
Setting flash mode
Reading CMT boot data...
CMT Boot Data
--------------
Asic ID : 000000010000022600000001020C192102044100
Public ID : 30E00211E62E00496B144E045BE4FDE612999D49
Hash : 7B045400E1752022F9EB80B0DEA9C65D
Hardware ID: 020C192102044100
Sending 2ND...
Cannot initialize booting 2ND
Job's finished with errors!

05-08-2011, 12:53	#1 (permalink)
outbreak198x Freak Poster Join Date: Jan 2008 Posts: 225 Member: 688725 Status: Offline Thanks Meter: 7	Problem unlock 7230 Hello Problem reading SL3 Log info for 7230 - JAF and UFS always error Connecting to UFS3 SarasSoft #2 (SN UFxBoot V2.2 (c) SarasSoft 2003 UFS_USB V2.8 (c) SarasSoft 2007 Connected to UFS interface. Connection interface is set to UFS now. Job's finished successfully! SL3 Unlocking started Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600000001020C192102044100 Public ID : 07300110059D544055C20FE2A09DD78AF142DA10 Hash : 7B045400E1752022F9EB80B0DEA9C65D Hardware ID: 020C192102044100 Sending 2ND... Cannot initialize booting 2ND Job's finished with errors!

01-07-2012, 01:10	#12 (permalink)
outbreak198x Freak Poster Join Date: Jan 2008 Posts: 225 Member: 688725 Status: Offline Thanks Meter: 7	Again having a problem reading Log - Please again update Fenix Team Hello, For a few month - you update fenix Software because ID was not supported for 7230 - now same case - maybe you can add ID again? SL3 Unlocking started Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600000001020C192102044100 Public ID : 30E00211E62E00496B144E045BE4FDE612999D49 Hash : 7B045400E1752022F9EB80B0DEA9C65D Hardware ID: 020C192102044100 Sending 2ND... Cannot initialize booting 2ND Job's finished with errors!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21

05-08-2011, 15:55	#2 (permalink)
el-polaco No Life Poster Join Date: Jun 2009 Location: SouthAmericaUnlockers Age: 52 Posts: 2,638 Member: 1057178 Status: Offline Sonork: Kfe~Labs Co.- Thanks Meter: 568	try with cable with 2 m-bus conector. I unlocked just today a 7230 with SLAP 2.3 Perfect http://www.4shared.com/photo/pv5CgNY...spaa_Feni.html B/R The_polack

05-08-2011, 16:31	#3 (permalink)
outbreak198x Freak Poster Join Date: Jan 2008 Posts: 225 Member: 688725 Status: Offline Thanks Meter: 7	i tried ufs universal cable also the same, it wont go into local mode - also flashed new sw over usb - read info over fbus is no problem

05-08-2011, 22:45	#5 (permalink)
outbreak198x Freak Poster Join Date: Jan 2008 Posts: 225 Member: 688725 Status: Offline Thanks Meter: 7	Why i should show you the time, i can't calculate the code, because i can't read out data i need! But i reach about 3400M h/s, if you want to know... (one 5970)

05-12-2011, 17:37	#6 (permalink)
outbreak198x Freak Poster Join Date: Jan 2008 Posts: 225 Member: 688725 Status: Offline Thanks Meter: 7	still same problem - any ideas?

05-12-2011, 17:47	#8 (permalink)
outbreak198x Freak Poster Join Date: Jan 2008 Posts: 225 Member: 688725 Status: Offline Thanks Meter: 7	but i tried all BSI on UFC Cable, and also bought Fbus Cable.... - and it just flicker white, and reboots, but i can read out info with UFS and HWK Soft?

05-12-2011, 18:16	#9 (permalink)
SJS No Life Poster Join Date: Aug 2002 Location: Austria-Velden Age: 29 Posts: 860 Member: 14684 Status: Offline Thanks Meter: 60	Maybe , problem is in phone. Have 1 here, have read log without problem, and 2. phone same sw version, not possible. Problem can only be in phone, not in cable!!

05-12-2011, 18:45	#10 (permalink)
SJS No Life Poster Join Date: Aug 2002 Location: Austria-Velden Age: 29 Posts: 860 Member: 14684 Status: Offline Thanks Meter: 60	Edit: Have modifyed my cable now, and 2. phone was readed also. But 1. phone without modification!!

05-13-2011, 09:29	#11 (permalink)
EuropaGsm Freak Poster Join Date: Oct 2003 Location: Spain Age: 47 Posts: 168 Member: 41412 Status: Offline Thanks Meter: 18	Have correct Pinout for UFC universal Fbus? Regards.