GSM-Forum - Easy-JTAG Very HOT Update. v1.9.0.5 - KMVTU000LM REPAIR even totay dead emmc :)

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)

- - Easy-JTAG Very HOT Update. v1.9.0.5 - KMVTU000LM REPAIR even totay dead emmc :) (https://forum.gsmhosting.com/vbb/f672/easy-jtag-very-hot-update-v1-9-0-5-kmvtu000lm-repair-even-totay-dead-emmc-1935674/)

what about flare s100 can we repair emmc ic

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: Samsung GT-S7562 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: ,FW Ver.: 01.52
Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x007730E1 Mfg.: 0x070, Part: 0x0773, Ver.: 0x0
CPU Manufacturer: QUALCOMM , CPU Name: MSM8225 Rev 1.3
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x646F0065 Name : NROM M Size : 128.0 M , (262144) Blocks
eMMC flash device(s) found, Device ID : 0x0065006f

so need to remove emmc first

is there any sollution without removing emmc?

Quote:

Originally Posted by abdelkader85 (Post 10972405)

so need to remove emmc first

is there any sollution without removing emmc?

At this time no solution for non Samsung eMMC.
This eMMC is not Samsung.

Best Regards

thnks z3x team
i wanto know is there any sulotion withuot remove ic to repair it
i have alot of s3 whit damage ic emmc

Quote:

Originally Posted by vikboston (Post 10972426)

At this time no solution for non Samsung eMMC.
This eMMC is not Samsung.

Best Regards

is there any sollution without removing emmc of the i9300 ?

Quote:

Originally Posted by abdelkader85 (Post 10972485)

is there any sollution without removing emmc of the i9300 ?

If you have proff soldering skill, then you can do it without remove, look this report: http://forum.gsmhosting.com/vbb/10972402-post9.html

how about TP for KMVYL000LM-B503

Quote:

Originally Posted by blang (Post 10972490)

If you have proff soldering skill, then you can do it without remove, look this report: http://forum.gsmhosting.com/vbb/10972402-post9.html

i do every think

format and reset the emmc and set config boot and repaire vtuoom and repaire extcsd and update the emmc firmware with the laste update ''he ask me to selecte the correct name " and i writ rom 1 and rom 2 and i flashed the phone by odin pit file + one file in pda

but the phone still restart now even in download mode with jig or key combination

pls guide to repaire this phone

Quote:

Originally Posted by abdelkader85 (Post 10972509)

i do every think

format and reset the emme and config boot and repaire vtuoom and repaire extcsd and update the emmc firmware withe the laste update ''he ask me to selecte the correct name " and in write rom 1 and rom 2 and i flashed the phone by odin pit file + one file in pda

but the phone still restart even in download mode

pls guide to repaire this phone

hey if phone restart when u put into download mode please try to check power swicth on(change it)

Hi 100% good

01.52
CMD Pullup Level:2052 mV
CMD Active Level:2340 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC NAME (HEX): 30303030303000
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150302_1807.extcsd
Done.

Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 16160A0345F41E0C, ,FW Ver.: 01.52
CMD Pullup Level:2062 mV
CMD Active Level:2567 mV
Setup firmware normal update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect eMMC power lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.

Quote:

Originally Posted by abdelkader85 (Post 10972509)

simply change power bouttan bro dont be moron

Quote:

Originally Posted by freeman2001 (Post 10972523)

simply change power bouttan bro dont be moron

phone start and restart without it

Hi
Thanks
Reapir 48/50 pcs,yesterday
today repaired 65pc , and i have more than 400pcs....D:)

Sorry for my question

1. How to know that my phone is emmc bricked?
2. Why does phones become emmc bricked?