OPPO A52 CPH2069 screen lock code reset

[at-kom]

Originally Posted by CHANDARAKK

EASY JAG ADaper come from pin solder with pin out so no worry
just have it u will done

so, like I wrote , I must use Easy JTAG Adapter and solder USB TYP C cable (RX, TX, POWER, GND signal) to this JTAG Adapter ?

[at-kom]

Originally Posted by CHANDARAKK

EASY JAG ADaper come from pin solder with pin out so no worry
just have it u will done

I connect USB cable typC (RX, TX, Vcc, GND) to Easy JTAG Adapter , BUT no possitive results

[..:: Devil_king ::..]

Originally Posted by at-kom

so, like I wrote , I must use Easy JTAG Adapter and solder USB TYP C cable (RX, TX, POWER, GND signal) to this JTAG Adapter ?

use easy jtag adapter with cmd,clk,data solder on mobile board using isp pinout

and connect usb to phone with a charger or pc usb port

[at-kom]

Originally Posted by ..:: Devil_king ::..

use easy jtag adapter with cmd,clk,data solder on mobile board using isp pinout

and connect usb to phone with a charger or pc usb port

You wrote about this isp pinout ?

[layder]

Originally Posted by at-kom

You wrote about this isp pinout ?

This pinout not EDL 9008 pinout - it's UFS ISP pinout
You work it with UFS tab on software

ODL port - Qualcom Emeggency Download Loader - it''s a USB connection with device connected to PC at QD 9008 port

[at-kom]

Originally Posted by layder

This pinout not EDL 9008 pinout - it's UFS ISP pinout
You work it with UFS tab on software

ODL port - Qualcom Emeggency Download Loader - it''s a USB connection with device connected to PC at QD 9008 port

in Tab UFS - Android - Reset Oppo

I have :

Z3X EasyJtag Software ver. 3.7.0.20

Can't open link, Code: -51, Reason: BOX: Socket not detected
Done.

---------------------------
EasyJTAG
---------------------------
Unhandled unknown exception; terminating the application.

---------------------------
OK
---------------------------

[layder]

Originally Posted by at-kom

in Tab UFS - Android - Reset Oppo

I have :

Z3X EasyJtag Software ver. 3.7.0.20

Can't open link, Code: -51, Reason: BOX: Socket not detected
Done.

---------------------------
EasyJTAG
---------------------------
Unhandled unknown exception; terminating the application.

---------------------------
OK
---------------------------

what socket you use?

[at-kom]

Originally Posted by layder

what socket you use?

USB cable Pin solder to JTAG solder:
(GND)-(GND)
(Data+)-(14)
(Data-)-(8)
(+5V)-(2)

its nessesary to put micro usb charger to Easy Jtag Plus, to take another power when I read phone ?

[layder]

Originally Posted by at-kom

USB cable Pin solder to JTAG solder:
(GND)-(GND)
(Data+)-(14)
(Data-)-(8)
(+5V)-(2)

its nessesary to put micro usb charger to Easy Jtag Plus, to take another power when I read phone ?

for use ufs isp you need use bga254 isp socket

[at-kom]

Originally Posted by layder

for use ufs isp you need use bga254 isp socket

I must remove memory from phone pcb and connect it to bga254 isp socket then /Reset OPPO/ and solder to socket in phone pcb ?

[layder]

Originally Posted by at-kom

I must remove memory from phone pcb and connect it to bga254 isp socket then /Reset OPPO/ and solder to socket in phone pcb ?

All UFS socket have cryptochip. you can't connect UFS chips directly to box

BGA254 socket have ISP pins for connect to UFS at PCB

UFS chips need more demands unlike eMMC

Our team is sale sockets with correct schematics to connect UFS chip

[at-kom]

Originally Posted by layder

All UFS socket have cryptochip. you can't connect UFS chips directly to box

BGA254 socket have ISP pins for connect to UFS at PCB

UFS chips need more demands unlike eMMC

Our team is sale sockets with correct schematics to connect UFS chip

So If I don`t have BGA254 socket , I must buy it.
Remove memory from phone pcb and put it, to the BGA254 socket and connect it to EASY JTAG Plus, its correct ?

[layder]

Originally Posted by at-kom

So If I don`t have BGA254 socket , I must buy it.
Remove memory from phone pcb and put it, to the BGA254 socket and connect it to EASY JTAG Plus, its correct ?

yes, it's correct
some people is connect via CPU pins

[at-kom]

Originally Posted by layder

yes, it's correct
some people is connect via CPU pins

So, it`s a BIG PROBLEM Bro.

When would you write in the first post
I wouldn`t do this phone, because when I remove memory from PCB and
and re-solder it the customer will lose the producent guarantee.

[sohidulbokul]

bro try to oppo A52 CPH 2061 Password Unlock Isp pinout UfS CHIPS CPU Drill Done by easy jtag plus