OPPO's (Realme) FRP/Code/Pattern reset thread. Post operations, pinout here - Page 14 - GSM-Forum

petcomp · 06-30-2020, 13:30

Need pinout Oppo CPH1951 and Realme RMX1993

charlee17 · 06-30-2020, 19:36

Paano po gagawin kapag yung oppo A5s ayaw mag stay sa com, di rin po dumi diretso sa fastboot screen, tumutukoy po siya sa boot. Di ko naman po ma open and ADB kasi na boot loop. Thank u.

himcom · 07-02-2020, 16:58

Oppo A12 CPH2083 Isp Pinout

nori2007 · 07-21-2020, 15:31

realme 5i with code + frp connect error with easy jtag plus software

and with emmc file manager connect ok , frp + code unlock ok

layder · 07-21-2020, 16:21

Quote:

Originally Posted by nori2007

realme 5i with code + frp connect error with easy jtag plus software

and with emmc file manager connect ok , frp + code unlock ok

I can't see connection errors
I'ts only mount error - it's not a problem

blondugsm69zzz · 07-22-2020, 20:14

Oppo (A9 2020) CPH1941 isp pinout Cannot find, please Help Me!

nagesss · 07-28-2020, 05:46

Quote:

Originally Posted by blondugsm69zzz

Oppo (A9 2020) CPH1941 isp pinout Cannot find, please Help Me!

Im not sure but i guess it has ufs chip.not emmc..

Sent from my SM-A305F using Tapatalk

nagesss · 07-28-2020, 05:48

Oppo a1k...old easy jtag....pattern.and frp...sucess

Sent from my SM-A305F using Tapatalk

DionisioMIguel · 08-13-2020, 08:27

i need help with, my oppo PBET00, IS LOCKED WITH PATERN LOCK, I NEED TO REMOVE PLEASE....

.::THE ROCK::. · 08-15-2020, 10:40

INFO OR RESET LOG

Code:

Z3X EasyJtag Software ver. 3.7.0.17
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0707031F7AA05FBD, ,FW Ver.: 01.63
CMD Pullup Level:2072 mV
CMD Active Level:2392 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 90014A68423861503E03C0893AAFC5E4
eMMC CSD : D02700328F5903FFFFFFFFEF8E400042
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 12/2018  Rev.0x3
eMMC NAME: hB8aP> , S/N: 3230218927
eMMC NAME (HEX): 68423861503E 
EMMC ROM1 (Main User Data)   Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
RPMB Info  mmc_switch_part Error, Reason: CARD Ready Timeout Error 
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: hB8aP>_3230218927_20200815_1505.extcsd
The protective MBR's 0xEE partition is oversized! Auto-repairing.
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB 
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB 
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Logical sector size: 0x200  bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x003F000000 (3.352GB)
Short EXT fs info:
Size: 3.352GB
Block size: 4.0KB
Inode size: 256
Inodes: 219888
Short Android info:
Build ID:  OPM1.171019.026
Release Base ID:  8.1.0
Security Path:  2020-07-05
Architecture ABI:  arm64-v8a
Device manufacturer:  OPPO
Build Description:  msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20200710.012336 release-keys
Backup saved: BuildProp_20200815_1505.txt
---------------------------------------------
Detected USERDATA USERDATA : 0x0158000000 (23.745GB)
Unable to mount USERDATA , code : 95
Userdata Superblock contents::
 BEC4D75B A8E8AAF1 AEFEBDC5 67A8B0CB 401ABF1B FED1097E 7ECB64C9 9B6914AA     ¾Ä×[¨èªñ®þ½Åg¨°Ë@.¿.þÑ    ~~ËdÉ›i.ª;
 2E39263C C6F8027A D711A328 F9319282 4BF23797 7C21829F 55D441D9 799ADBE8     .9&<Æø.z×.£(ù1’‚Kò7—|!‚ŸUÔAÙyšÛè;
 7159ECD1 458C6449 6CEAEFDD CABEA537 7C29ED3B 1EFB881F B21098EB 099CAA7B     qYìÑEŒdIlêïÝÊ¾¥7|)í;.û..²..ë    œª{;
 794A5481 03CDAC02 C8D9E86F 3022A3B5 0DAC12C3 F31F5378 FFD7B2BA 74AAD4D2     yJT..Í¬.ÈÙèo0"£µ.¬.Ãó.Sxÿ×²ºtªÔÒ;
 9067C8FB 7CA230A9 AE357AB0 2E914D77 C31C12FD 3AD89F52 C92D0E5A 600CFF8C     .gÈû|¢0©®5z°.‘MwÃ..ý:ØŸRÉ-.Z`.ÿŒ;
 A98597A3 46C2FBE6 5E6DEDDC BCA7DD1A 9450E5D0 490C806E 9A25FBE2 9861C955     ©…—£FÂûæ^míÜ¼§Ý.”PåÐI..nš%ûâ.aÉU;
 9B89CDFD DE57E99E 8526BF42 DF257360 0AE3F165 35CC7010 6ED9C6CB 3A7BBF86     ›‰ÍýÞWéž…&¿Bß%s`.ãñe5Ìp.nÙÆË:{¿†;
 E4EAC068 4785725F F2D399C5 03C9BA6E 256E918C 6C3D626F 1A0F5DF9 16469187     äêÀhG…r_òÓ.Å.Éºn%n‘Œl=bo..]ù.F‘‡;
Done.

Running:Format FRP Partition...
Z3X EasyJtag Software ver. 3.7.0.17
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0707031F7AA05FBD, ,FW Ver.: 01.63
CMD Pullup Level:2062 mV
CMD Active Level:2660 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 90014A68423861503E03C0893AAFC5E4
eMMC CSD : D02700328F5903FFFFFFFFEF8E400042
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 12/2018  Rev.0x3
eMMC NAME: hB8aP> , S/N: 3230218927
eMMC NAME (HEX): 68423861503E 
EMMC ROM1 (Main User Data)   Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
RPMB Info  mmc_switch_part Error, Reason: CARD Ready Timeout Error 
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
The protective MBR's 0xEE partition is oversized! Auto-repairing.
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB 
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB 
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Logical sector size: 0x200  bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB) , formatting...
Done.
Detected LINUX(Android) CONFIG : 0x002FC80000 (32.0KB) formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0158000000 (23.745GB) , formatting...
Done.
Done.
Done.

.::THE ROCK::. · 08-15-2020, 10:47

Z3X EasyJtag EMMC File Manager v 1.18 TEST at 04/04/2020 Started..

Box API Version: 3308

FS Driver Version: 11062019

SQLite Version: 3.30.1

FSCK Engine Version: 11062019

ESE DB Version: 11062019

System Util Version: 11062019

System: Windows NT 6.2 (Build 9200) / 64 BIT

CPU: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz

!!FOR BETA-TESTERS ONLY!!

Z3X Card Serial: AA098EDB

EasyJtag Box v1 Found at: COM94

EasyJtag Box Firmware: 1.63

Source: EasyJtag Port [EMMC/SD/MMC]

Generation: GPT [QC/SAMS/BCM/INTEL/MTK]

Box Voltage set to: 3300 mV

Scanner Thread Created..

Config: 100111111110111

Setup HiPower CLK: OFF

Disable HS Timing: TRUE

Connecting To EasyJtag Box: 3300mV/21MHz/1BIT

EasyJtag Box Found! Result: 0/OK

CMD Pullup Level: 2041 mV

CMD Active Level: 2516 mV

EasyJtag S/N: 0707031F7AA05FBD

EasyJtag Box FirmWare: 1.63

Box Bus Width = 1 BIT

Box Hardware = EasyJtag 1st Generation

Search EMMC Chip...

EMMC Chip Found! 0/OK

EMMC CID: 150100514536334D42034E9CD07A55B0

EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C

EMMC VENDOR: SAMSUNG

EMMC NAME: QE63MB

EMMC SERIAL: 4E9CD07A

EMMC REVISION: 03

EMMC ROM1 Size: 30535680 Block(s)/14910 MB

EMMC ROM2/3 Size: 8192 Block(s)/4096 KB

EMMC RPMB Size: 8192 Block(s)/4096 KB

EMMC RPMB Counter: 104076

EMMC RPMB Answer: 0/OK

Switch To ROM1 Part: 0/OK

EMMC REV: 1.8 (for MMC v5.1)

EMMC VER: MMC 5.1

EMMC DEV Life Time: 0x01 -> Normal

EMMC MLC Life Time: 0x03 -> 20% - 30% Life Time Used

EMMC SLC Life Time: 0x03 -> 20% - 30% Life Time Used

EMMC Boot Config: 0x38/0x00/0x01

ExtCSD Automatically Saved..

Scanning Data From EMMC. Please wait..

Scanning GUID Partition Table from ROM1

GUID Partition Table is Found. Max Parts: 64

GPT: GPT [000000000000 - 000000004400] Size: 17.00 KB

GPT: OPPODYCNVBK [000000005000 - 000000A00000] Size: 10.00 MB

GPT: OPPOSTANVBK [000000A05000 - 000000A00000] Size: 10.00 MB

GPT: MODEMST1 [000001405000 - 000000180000] Size: 1.50 MB

GPT: MODEMST2 [000001585000 - 000000180000] Size: 1.50 MB

GPT: PERSIST [000001705000 - 000002000000] Size: 32.00 MB

GPT: OPPORESERVE1 [000003705000 - 000000800000] Size: 8.00 MB

GPT: OPPORESERVE2 [000003F05000 - 000004000000] Size: 64.00 MB

GPT: FSC [000007F05000 - 000000000400] Size: 1.00 KB

GPT: SSD [000007F06000 - 000000002000] Size: 8.00 KB

GPT: SBL1 [000007F08000 - 000000080000] Size: 512.00 KB

GPT: RPM [000007F88000 - 000000080000] Size: 512.00 KB

GPT: TZ [000008008000 - 000000200000] Size: 2.00 MB

GPT: DEVCFG [000008208000 - 000000040000] Size: 256.00 KB

GPT: SBL1BAK [000008248000 - 000000080000] Size: 512.00 KB

GPT: RPMBAK [0000082C8000 - 000000080000] Size: 512.00 KB

GPT: TZBAK [000008348000 - 000000200000] Size: 2.00 MB

GPT: DEVCFGBAK [000008548000 - 000000040000] Size: 256.00 KB

GPT: DSP [000008588000 - 000001000000] Size: 16.00 MB

GPT: DDR [000009800000 - 000000008000] Size: 32.00 KB

GPT: FSG [000009808000 - 000000400000] Size: 4.00 MB

GPT: SEC [000009C08000 - 000000004000] Size: 16.00 KB

GPT: ABOOT [000009C0C000 - 000000100000] Size: 1.00 MB

GPT: ABOOTBAK [000009D0C000 - 000000100000] Size: 1.00 MB

GPT: MODEM [000009E0C000 - 000008000000] Size: 128.00 MB

GPT: DTBO [000011E0C000 - 000000800000] Size: 8.00 MB

GPT: VBMETA [00001260C000 - 000000010000] Size: 64.00 KB

GPT: BOOT [00001261C000 - 000004000000] Size: 64.00 MB

GPT: RECOVERY [00001661C000 - 000004000000] Size: 64.00 MB

GPT: DEVINFO [00001A61C000 - 000000100000] Size: 1.00 MB

GPT: SPLASH [00001A800000 - 000000B00000] Size: 11.00 MB

GPT: LOGO [00001B300000 - 000002000000] Size: 32.00 MB

GPT: DRIVER [00001D300000 - 000002000000] Size: 32.00 MB

GPT: CACHE [00001F300000 - 000010000000] Size: 256.00 MB

GPT: MISC [00002F300000 - 000000100000] Size: 1.00 MB

GPT: KEYSTORE [00002F400000 - 000000080000] Size: 512.00 KB

GPT: CONFIG [00002F480000 - 000000008000] Size: 32.00 KB

GPT: LOG [00002F488000 - 000004000000] Size: 64.00 MB

GPT: OEM [000033488000 - 000000100000] Size: 1.00 MB

GPT: LIMITS [000033800000 - 000000008000] Size: 32.00 KB

GPT: MOTA [000034000000 - 000000080000] Size: 512.00 KB

GPT: DIP [000034080000 - 000000100000] Size: 1.00 MB

GPT: MDTP [000034180000 - 000002000000] Size: 32.00 MB

GPT: SYSCFG [000036180000 - 000000080000] Size: 512.00 KB

GPT: MCFG [000036200000 - 000000400000] Size: 4.00 MB

GPT: LKSECAPP [000036800000 - 000000020000] Size: 128.00 KB

GPT: CMNLIB [000036820000 - 000000100000] Size: 1.00 MB

GPT: CMNLIB64 [000036920000 - 000000100000] Size: 1.00 MB

GPT: KEYMASTER [000036A20000 - 000000100000] Size: 1.00 MB

GPT: LKSECAPPBAK [000036B20000 - 000000020000] Size: 128.00 KB

GPT: CMNLIBBAK [000036B40000 - 000000100000] Size: 1.00 MB

GPT: CMNLIB64BAK [000036C40000 - 000000100000] Size: 1.00 MB

GPT: KEYMASTERBAK [000036D40000 - 000000100000] Size: 1.00 MB

GPT: APDP [000037000000 - 000000040000] Size: 256.00 KB

GPT: MSADP [000037040000 - 000000040000] Size: 256.00 KB

GPT: DPO [000037080000 - 000000002000] Size: 8.00 KB

GPT: LOGDUMP [000037082000 - 000004000000] Size: 64.00 MB

GPT: VM-KYSTORE [00003B082000 - 000000100000] Size: 1.00 MB

GPT: VM-DATA [00003B182000 - 000000A00000] Size: 10.00 MB

GPT: HYP [00003C000000 - 000000800000] Size: 8.00 MB

GPT: VM-SYSTEM [00003C800000 - 000004000000] Size: 64.00 MB

GPT: VM-LINUX [000040800000 - 000002000000] Size: 32.00 MB

GPT: SYSTEM [000042800000 - 0000D6900000] Size: 3.35 GB

GPT: VENDOR [000119100000 - 000041F60000] Size: 1.03 GB

GPT: USERDATA [00015B800000 - 0002485FBE00] Size: 9.13 GB

GPT: BACKUP_GPT [0003A3DFBE00 - 000000004200] Size: 16.50 KB

Reading Table Completed

Scanning GUID Partition Table from ROM2

GPT Signature Not Found. Break..

Scanning GUID Partition Table from ROM3

GUID Partition Table is Found. Max Parts: 4

GPT: GPT [000000000000 - 000000004400] Size: 17.00 KB

GPT: CDT [000000004400 - 000000000800] Size: 2.00 KB

GPT: LAST_GROW [000000004C00 - 0000003F7200] Size: 3.97 MB

GPT Backup Header Not Found

Reading Table Completed

Partition #9 mount as [/mnt/vendor/persist] -> 32.00 MB

Partition #11 mount as [/mnt/vendor/opporeserve] -> 64.00 MB

Partition #22 mount as [/dev_22] -> 16.00 MB

Partition #28 mount as [/MODEM] -> 128.00 MB

Partition #37 mount as [/cache] -> 256.00 MB

Partition #41 mount as [/LOG] -> 64.00 MB

Partition #66 mount as [/dev_66] -> 3.35 GB

Partition #67 mount as [/dev_67] -> 1.03 GB

=================================

Warning! Partition #68 -> 'USERDATA' is ENCRYPTED!

=================================

EmptyCheck:

EMPTY -> #23 - [FSG]

EMPTY -> #33 - [SPLASH]

EMPTY -> #37 - [MISC]

EMPTY -> #38 - [KEYSTORE]

EMPTY -> #41 - [OEM]

EMPTY -> #42 - [LIMITS]

EMPTY -> #43 - [MOTA]

EMPTY -> #44 - [DIP]

EMPTY -> #46 - [SYSCFG]

EMPTY -> #47 - [MCFG]

EMPTY -> #57 - [MSADP]

EMPTY -> #58 - [DPO]

EMPTY -> #59 - [LOGDUMP]

EMPTY -> #60 - [VM-KYSTORE]

EMPTY -> #61 - [VM-DATA]

EMPTY -> #62 - [HYP]

EMPTY -> #63 - [VM-SYSTEM]

EMPTY -> #64 - [VM-LINUX]

EmptyCheck: Done

=================================

Warning! Device Blocked by FRP

For Reset FRP Try to Tools Tab

Press Reset FRP Button

Partition #40 -> CONFIG

=================================

Android Info:

Vendor = OPPO

CPU ABI = arm64-v8a

Android Version = 9

Android Info:

Brand = OPPO

Device = RMX1805

Model = RMX1805

Product = RMX1805

Firm Version = RMX1805EX_11_A.61

Inc. Version = 1569323573

Firm Date = Tue Sep 24 19:12:53 CST 2019

Security Patch = 2019-10-05

OPPO Name = realme 2

Android Info:

Platform = msm8953

Scanner Thread Terminated

Elapsed: 00:00:14:172

Found 72 Partition(s)..

Scan Done. Init Main Engine...

Resetting EasyJtag Box. Wait..

CMD Pullup Level: 2041 mV

CMD Active Level: 3042 mV

Reader Engine Initialized.. 0/OK

Source: EasyJtag Port [EMMC/SD/MMC]

Generation: GPT [QC/SAMS/BCM/INTEL/MTK]

Operation Done: [Init Engine], Elapsed: 00:00:02:150

Universal Wipe User Data v1.0

Wiping MISC Partition..

Partition #38 is '/MISC'. Erasing..

Wipe Mode: Oppo/Vivo Factory Reset

Wipe 'MISC' Partition Done..

Wiping PARA Partition..

Partition PARA Not Found. Skip..

Done Wiping Data..

Elapsed Time: [00:00:00:056]

Operation Done: [Universal Wipe Data], Elapsed: 00:00:00:065

Universal Wipe User Data v1.0

Wiping MISC Partition..

Partition #38 is '/MISC'. Erasing..

Wipe Mode: Oppo/Vivo Factory Reset

Wipe 'MISC' Partition Done..

Wiping PARA Partition..

Partition PARA Not Found. Skip..

Done Wiping Data..

Elapsed Time: [00:00:00:051]

Operation Done: [Universal Wipe Data], Elapsed: 00:00:00:054

joseck · 08-15-2020, 16:46

OPPO A1K only show mtak port after wipe user data...cmd/clk/data0 all clean ..please help me recover

Ichlibidich · 08-15-2020, 23:45

Quote:

Originally Posted by joseck

OPPO A1K only show mtak port after wipe user data...cmd/clk/data0 all clean ..please help me recover

Put a jump on clk
,,,,,,,,,,,,,,,,,,,,,,,,

joseck · 08-17-2020, 06:51

oppo a1k after WIPE USE DATA only MediaTek USB port in device manager...please help me to recover set

layder · 08-17-2020, 07:32

Quote:

Originally Posted by joseck

oppo a1k after WIPE USE DATA only MediaTek USB port in device manager...please help me to recover set

check hardware - CMD/CLK resistors

06-30-2020, 13:30	#196 (permalink)
petcomp Junior Member Join Date: Feb 2007 Location: Novi Sad Posts: 35 Member: 455270 Status: Offline Thanks Meter: 3	Oppo Need pinout Oppo CPH1951 and Realme RMX1993

07-02-2020, 16:58	#198 (permalink)
himcom Freak Poster Join Date: Dec 2007 Posts: 204 Member: 664247 Status: Offline Thanks Meter: 371	Isp Pinout Oppo A12 CPH2083 Oppo A12 CPH2083 Isp Pinout

06-30-2020, 19:36	#197 (permalink)
charlee17 Junior Member Join Date: Oct 2017 Posts: 1 Member: 2765671 Status: Offline Thanks Meter: 0	Paano po gagawin kapag yung oppo A5s ayaw mag stay sa com, di rin po dumi diretso sa fastboot screen, tumutukoy po siya sa boot. Di ko naman po ma open and ADB kasi na boot loop. Thank u.

07-21-2020, 15:31	#199 (permalink)
nori2007 Freak Poster Join Date: Sep 2007 Location: algeria Age: 35 Posts: 469 Member: 580077 Status: Offline Sonork: 100.1591941 Thanks Meter: 207	realme 5i with code + frp connect error with easy jtag plus software and with emmc file manager connect ok , frp + code unlock ok

07-22-2020, 20:14	#201 (permalink)
blondugsm69zzz Insane Poster Join Date: Jul 2006 Location: Romania Posts: 73 Member: 311520 Status: Offline Thanks Meter: 6	Oppo (A9 2020) CPH1941 isp pinout Cannot find, please Help Me!

07-28-2020, 05:48	#203 (permalink)
nagesss Freak Poster Join Date: Dec 2014 Location: nepal,lalitpur Posts: 350 Member: 2306223 Status: Offline Sonork: 1660968:1234 Thanks Meter: 117	Oppo a1k...old easy jtag....pattern.and frp...sucess Sent from my SM-A305F using Tapatalk

08-13-2020, 08:27	#204 (permalink)
DionisioMIguel Junior Member Join Date: Dec 2015 Location: Angola - Luanda Posts: 3 Member: 2496760 Status: Offline Thanks Meter: 0	i need help with, my oppo PBET00, IS LOCKED WITH PATERN LOCK, I NEED TO REMOVE PLEASE....

08-15-2020, 16:46	#207 (permalink)
joseck Freak Poster Join Date: Dec 2007 Location: somewhere in KENYA Posts: 245 Member: 648607 Status: Offline Sonork: 100.1638674 Thanks Meter: 23	OPPO A1K only show mtak port after wipe user data...cmd/clk/data0 all clean ..please help me recover

08-17-2020, 06:51	#209 (permalink)
joseck Freak Poster Join Date: Dec 2007 Location: somewhere in KENYA Posts: 245 Member: 648607 Status: Offline Sonork: 100.1638674 Thanks Meter: 23	oppo a1k after WIPE USE DATA only MediaTek USB port in device manager...please help me to recover set