GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus
Reload this Page Post here succesfull JTAG and eMMC operations with Easy-Jtag:
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
Page 13 of 51 « First 3101112 13 14151623 Last »
 
LinkBack Thread Tools Display Modes
Old 12-07-2013, 04:42   #181 (permalink)
Freak Poster
 
Join Date: Dec 2007
Location: From Syria In Turkye
Posts: 238
Member: 643083
Status: Offline
Sonork: 100.1593024
Thanks Meter: 40
Donate money to this user

SAMSUNG GT-S5570i

Connecting to Target...
JTAG device: BCM21553
CPU IDCODE : 0x07B3617F Mfg.: 0x0bf, Part: 0x7b36, Ver.: 0x0
CPU Manufacturer: SST/Broadcom , CPU Name: BCM21553
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:4096 bytes , Block size:64 pages
NAND Writing BCM_BOOT...
NAND Write OK! Elapsed time: 2.146014s (123.019 KiB/s)
NAND Writing SBL...
Packet length too large: 0xFFFFFFFF
Unknown DCC answer /PROTOCOL/
Failed writing file SBL.BIN to NAND flash 0 at offset 0x00040000 code# -253
NAND Writing PIT...
DCC Header read error
Unknown DCC answer /PROTOCOL/
Failed writing file PIT.BIN to NAND flash 0 at offset 0x00440000 code# -253
NAND Writing SYSPARM...
DCC Header read error
Unknown DCC answer /PROTOCOL/
Failed writing file SYSPARM.BIN to NAND flash 0 at offset 0x1F380000 code# -253
NAND Writing UPCH...
DCC Header read error
Unknown DCC answer /PROTOCOL/
Failed writing file UPCH.BIN to NAND flash 0 at offset 0x1FF00000 code# -253
All Done.
  Reply With Quote
Old 12-10-2013, 17:39   #182 (permalink)
Junior Member
 
Join Date: Jul 2013
Posts: 1
Member: 1970650
Status: Offline
Thanks Meter: 0
Hello everybody , can someone teach me how can i find the Jtag ping assignment for N7100 . I've already tried out but still fail . plz. help me to show with figures . Hoping for your help .


Regards.
  Reply With Quote
Old 12-10-2013, 18:59   #183 (permalink)
No Life Poster
 
Join Date: Dec 2007
Location: Pakistan Lower Dir kpk
Posts: 583
Member: 651892
Status: Offline
Thanks Meter: 205
GT-I9070 Dead Boot Repair Done...

Code:
JTAG device: U8500 
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500 
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
EasyJtag Suite ver.: 1.0.85.0 started.<br>Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit <a href="http://easy-jtag.com">http://easy-jtag.com</a><br>Initialising: SAMSUNG GT-I9070 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 131xxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1

success: claim_interface #0

Sending XLOADER...
success: bulk read 4 bytes

Done.

JTAG device: U8500 
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500 
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
Warn: CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...

EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing GPT...
eMMC Write OK! Elapsed time: 1.703125s (75.156 KiB/s)

EMMC Writing XLOADER...
eMMC Write OK! Elapsed time: 3.437500s (111.709 KiB/s)

EMMC Writing PIT...
eMMC Write OK! Elapsed time: 4.406250s (232.397 KiB/s)

EMMC Writing STE MEM INIT...
eMMC Write OK! Elapsed time: 2.640625s (193.893 KiB/s)

EMMC Writing PWR MGT...
eMMC Write OK! Elapsed time: 2.531250s (202.272 KiB/s)

EMMC Writing SBL...
eMMC Write OK! Elapsed time: 13.562500s (151.005 KiB/s)

EMMC Writing SBL2...
eMMC Write OK! Elapsed time: 13.625000s (150.312 KiB/s)

EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 11.484375s (89.165 KiB/s)

EMMC Writing IPL MODEM...
eMMC Write OK! Elapsed time: 9.812500s (208.713 KiB/s)

All Done.
Note: If u have U8500 usb driver issue..first uninstall Sony mobile Gordons Gate drivers
  Reply With Quote
The Following User Says Thank You to danishalnoor For This Useful Post:
Old 12-13-2013, 08:55   #184 (permalink)
No Life Poster
 
DUNIYA JAMAL's Avatar
 
Join Date: Oct 2005
Location: Pakistan
Posts: 1,922
Member: 192810
Status: Offline
Sonork: Some people NEED change
Thanks Meter: 860
Just 1 click

GT-I9070 Dead Boot Repair Done by Easy-Jtag
Without any Tension
  Reply With Quote
The Following 2 Users Say Thank You to DUNIYA JAMAL For This Useful Post:
Old 12-13-2013, 10:44   #185 (permalink)
Freak Poster
 
DZ-DEVELOPER's Avatar
 
Join Date: Nov 2013
Location: Algeria
Posts: 269
Member: 2068893
Status: Offline
Thanks Meter: 409
Donate money to this user
Repair Boot I9001
Repair Boot I9001



Code:
EasyJtag Suite ver.: 1.0.87.0 started.
Operating system ver.: ******s 7 (build 7600).
Successefuly connected to box on COM189
Box S/N: XXXXXXXXXXXXXXX, ,FW Ver.: XXX
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : XXXX-XXXX , ver: XX 
Loading repair file: 'I:\DJAMELJTAG\EASY-JTAG Box JTAG Manager\RCP\SAMSUNG\Samsung GT-i9001 V1.01.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9001, Ver.: 1.00
Repair file options. : NONE
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.87.0 started.
Operating system ver.: ******s 7 (build 7600).
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-I9001 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: XXXXXXXXXXXXXXXX ,FW Ver.: XXXX
Connecting to Target...
JTAG device: MSM8255 
CPU IDCODE : 0x27B360E1 Mfg.: 0x070, Part: 0x7b36, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU ****: MSM8255 Scorpion Rev 2.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 **** : SEM08G Size : 7.4 G , (15515648) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
NAND Writing GPT...
eMMC Write OK! Elapsed time: 2.144122s (59.698 KiB/s)
NAND Writing DBL...
eMMC Write OK! Elapsed time: 5.455312s (70.390 KiB/s)
NAND Writing OSBL...
eMMC Write OK! Elapsed time: 12.774731s (70.138 KiB/s)
NAND Writing PRT5...
eMMC Write OK! Elapsed time: 59.283390s (69.092 KiB/s)
NAND Writing ABOOT...
eMMC Write OK! Elapsed time: 29.718700s (68.913 KiB/s)
NAND Writing PARAM...
eMMC Write OK! Elapsed time: 13.071747s (68.545 KiB/s)
All Done.
  Reply With Quote
The Following 2 Users Say Thank You to DZ-DEVELOPER For This Useful Post:
Old 12-13-2013, 10:48   #186 (permalink)
Freak Poster
 
DZ-DEVELOPER's Avatar
 
Join Date: Nov 2013
Location: Algeria
Posts: 269
Member: 2068893
Status: Offline
Thanks Meter: 409
Donate money to this user
Repair Boot I9100
Repair Boot I9100



Code:
EasyJtag Suite ver.: 1.0.79.0 started.
Operating system ver.: ******s 7 (build 7601, Service Pack 1), 64-bit edition.
Successefuly connected to box on COM10
Box S/N: XXXXXXXXXXXXXXXX, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : XXXX-XXXX , ver: 22 
Loading repair file: 'F:\DJAMELJTAG\EASY-JTAG Box JTAG Manager\RCP\SAMSUNG\Samsung GT-i9100.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9100, Ver.: 1.00
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.79.0 started.
Operating system ver.: ******s 7 (build 7601, Service Pack 1), 64-bit edition.
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-I9100 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: xxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: S5PC210 
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU ****: CORTEX A9
Halting CPU...
Init target ...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00010015 **** : VYL00M Size : 14.7 G , (30777344) Blocks
EMMC #1 : ID : 0x00010000 **** : VYL00M Size : 512.0 K , (1024) Blocks
eMMC flash device(s) found, Device ID : 0x00150001
NAND Writing GPT...
eMMC Write OK! Elapsed time: 46.320171s (88.428 KiB/s)
NAND Writing SBL1...
eMMC Write OK! Elapsed time: 26.717054s (47.909 KiB/s)
NAND Writing SBL2...
eMMC Write OK! Elapsed time: 26.592039s (48.135 KiB/s)
NAND Writing PARAM...
eMMC Write OK! Elapsed time: 103.789246s (78.929 KiB/s)
NAND Writing ROM2...
eMMC Write OK! Elapsed time: 66.911163s (7.652 KiB/s)
All Done.
  Reply With Quote
The Following User Says Thank You to DZ-DEVELOPER For This Useful Post:
Old 12-15-2013, 14:30   #187 (permalink)
No Life Poster
 
..::Rizwan::..'s Avatar
 
Join Date: May 2008
Location: P@Ki$t@n
Posts: 3,165
Member: 777415
Status: Offline
Sonork: 1589702
Thanks Meter: 1,420
Donate money to this user
Galaxy Advance Boot Ok
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.91.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9070 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 121XXXXXXXXXXXXX ,FW Ver.: 01.47
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing GPT...
eMMC Write OK! Elapsed time: 0.353516s (362.077 KiB/s)
EMMC Writing XLOADER...
eMMC Write OK! Elapsed time: 3.684570s (104.218 KiB/s)
EMMC Writing PIT...
eMMC Write OK! Elapsed time: 4.023437s (254.509 KiB/s)
EMMC Writing STE MEM INIT...
eMMC Write OK! Elapsed time: 2.412110s (212.262 KiB/s)
EMMC Writing PWR MGT...
eMMC Write OK! Elapsed time: 2.969727s (172.406 KiB/s)
EMMC Writing SBL...
eMMC Write OK! Elapsed time: 13.194336s (155.218 KiB/s)
EMMC Writing SBL2...
eMMC Write OK! Elapsed time: 13.649414s (150.043 KiB/s)
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 11.063477s (92.557 KiB/s)
EMMC Writing IPL MODEM...
eMMC Write OK! Elapsed time: 8.833985s (231.832 KiB/s)
All Done.
  Reply With Quote
Old 12-15-2013, 19:42   #188 (permalink)
Junior Member
 
Join Date: May 2010
Location: Mumbai
Age: 34
Posts: 32
Member: 1301515
Status: Offline
Thanks Meter: 3
Please give m pinout
olive pinout please give m in urgent. Showing test mode
Quote:
Originally Posted by amit kanpur View Post
OLIVE EC6060 (ESIA) FTM MODE PROBLEM DONE WITH EASY-JTAG.

HERE ERASE ....



Uploaded with ImageShack.us


HERE WRITE DUMP ...



Uploaded with ImageShack.us



BRO..
AMIT SHARMA
(EASY-JTAG TEAM)
  Reply With Quote
Old 12-18-2013, 15:10   #189 (permalink)
No Life Poster
 
..::Rizwan::..'s Avatar
 
Join Date: May 2008
Location: P@Ki$t@n
Posts: 3,165
Member: 777415
Status: Offline
Sonork: 1589702
Thanks Meter: 1,420
Donate money to this user
GT-I9070 Success Boot Repair :)
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9070 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 12XXXXXXXXXXXXXXX ,FW Ver.: 01.47
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing GPT...
eMMC Write OK! Elapsed time: 0.353515s (362.078 KiB/s)
EMMC Writing XLOADER...
eMMC Write OK! Elapsed time: 2.680664s (143.248 KiB/s)
EMMC Writing PIT...
eMMC Write OK! Elapsed time: 4.643555s (220.521 KiB/s)
EMMC Writing STE MEM INIT...
eMMC Write OK! Elapsed time: 2.481445s (206.331 KiB/s)
EMMC Writing PWR MGT...
eMMC Write OK! Elapsed time: 2.450195s (208.963 KiB/s)
EMMC Writing SBL...
eMMC Write OK! Elapsed time: 13.287109s (154.134 KiB/s)
EMMC Writing SBL2...
eMMC Write OK! Elapsed time: 13.836914s (148.010 KiB/s)
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 11.192383s (91.491 KiB/s)
EMMC Writing IPL MODEM...
eMMC Write OK! Elapsed time: 9.011719s (227.260 KiB/s)
All Done.
  Reply With Quote
Old 12-19-2013, 10:19   #190 (permalink)
m3p
Junior Member
 
Join Date: Jul 2008
Location: Thailand
Posts: 33
Member: 812781
Status: Offline
Thanks Meter: 8
All Done. easy repair boot.


Timeout Error while reading approx : 0x00000100 bytes over DCC
Unknown DCC answer /PROTOCOL/
Failed writing file APPSBL.BIN to NAND flash 0 at offset 0x029C0000 code# -253
NAND Writing UPCH...
embeddedice handshake timeout
Timeout Error while reading approx : 0x00000100 bytes over DCC
Unknown DCC answer /PROTOCOL/
Failed writing file UPCH.BIN to NAND flash 0 at offset 0x1FF00000 code# -253
All Done.
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5660 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
embeddedice handshake timeout
Poll debug channel Failed;
Failed writing file MIBIB.BIN to NAND flash 0 at offset 0x00000000 code# -253
NAND Writing QCSBL...
embeddedice handshake timeout
Poll debug channel Failed;
Failed writing file QCSBL.BIN to NAND flash 0 at offset 0x00180000 code# -253
NAND Writing OEMSBL1...
embeddedice handshake timeout
Poll debug channel Failed;
Failed writing file OEMSBL1.BIN to NAND flash 0 at offset 0x00200000 code# -253
NAND Writing APPSBL...
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5660 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
NAND Write OK! Elapsed time: 18.170038s (87.176 KiB/s)
NAND Writing QCSBL...
NAND Write OK! Elapsed time: 4.972284s (106.189 KiB/s)
NAND Writing OEMSBL1...
NAND Write OK! Elapsed time: 10.168582s (77.887 KiB/s)
NAND Writing APPSBL...
NAND Write OK! Elapsed time: 21.337219s (98.982 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 13.984800s (94.388 KiB/s)
All Done.
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5660 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x503C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x5
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
NAND Write OK! Elapsed time: 14.928853s (106.103 KiB/s)
NAND Writing QCSBL...
NAND Write OK! Elapsed time: 4.972284s (106.189 KiB/s)
NAND Writing OEMSBL1...
NAND Write OK! Elapsed time: 7.453427s (106.260 KiB/s)
NAND Writing APPSBL...
NAND Write OK! Elapsed time: 19.866137s (106.312 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 12.576720s (104.956 KiB/s)
All Done.
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5660 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x503C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x5
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
NAND Write OK! Elapsed time: 14.950855s (105.947 KiB/s)
NAND Writing QCSBL...
NAND Write OK! Elapsed time: 4.980284s (106.018 KiB/s)
NAND Writing OEMSBL1...
NAND Write OK! Elapsed time: 7.457426s (106.203 KiB/s)
NAND Writing APPSBL...
NAND Write OK! Elapsed time: 19.883139s (106.221 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 12.583720s (104.897 KiB/s)
All Done.
Loading repair file: 'D:\TMB\Z3X\Jtag eMMC\Samsung\S5570\Samsung GT-S5570_v1.01.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-S5570, Ver.: 1.01
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5570 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5570 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5570 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5570 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5570 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.92.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5570 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1501500E98xxxxD4 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
NAND Write OK! Elapsed time: 14.918853s (106.174 KiB/s)
NAND Writing QCSBL...
NAND Write OK! Elapsed time: 4.977284s (106.082 KiB/s)
NAND Writing OEMSBL1...
NAND Write OK! Elapsed time: 7.458427s (106.189 KiB/s)
NAND Writing EFS2...
NAND Write OK! Elapsed time: 89.822136s (105.809 KiB/s)
NAND Writing APPSBL...
NAND Write OK! Elapsed time: 19.938141s (105.928 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 10.110578s (104.445 KiB/s)
All Done.
  Reply With Quote
Old 12-19-2013, 15:27   #191 (permalink)
Junior Member
 
Join Date: Dec 2013
Posts: 1
Member: 2088031
Status: Offline
Thanks Meter: 1
Hi I wonder if they have the old mobile phone motorola model CCUF 2170 B in Spanish hand, I have a team yon not have the instructions and do not know how to handle it if you were so friendly and could I provide quedaria very grateful to you without other reason at the moment to take this occasion to send a cordial greeting awaiting your reply I can only thank him to advance Thanks
  Reply With Quote
The Following User Says Thank You to Xose vazquez For This Useful Post:
Old 12-19-2013, 20:05   #192 (permalink)
Insane Poster
 
Join Date: Dec 2003
Location: SLOVENIJA
Age: 56
Posts: 93
Member: 45771
Status: Offline
Sonork: 1580823
Thanks Meter: 15
Z3x jtag Best box at this time ......i9100 imei repair need 15 min ...i have riff to riff is garbage
  Reply With Quote
The Following User Says Thank You to mobiservice For This Useful Post:
Old 12-19-2013, 20:32   #193 (permalink)
Insane Poster
 
Join Date: Dec 2003
Location: SLOVENIJA
Age: 56
Posts: 93
Member: 45771
Status: Offline
Sonork: 1580823
Thanks Meter: 15
i9100 boot ,imei,baseband repair .....ok
  Reply With Quote
The Following User Says Thank You to mobiservice For This Useful Post:
Old 12-24-2013, 17:29   #194 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: under pross
Posts: 2,469
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 1,048
Smile galaxy s2 i9100 repaired with easy jtag
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.93.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9100 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: xxxxxxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: S5PC210
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
Halting CPU...
Init target ...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00010015 Name : VYL00M Size : 14.7 G , (30777344) Blocks
EMMC #1 : ID : 0x00010000 Name : VYL00M Size : 512.0 K , (1024) Blocks
eMMC flash device(s) found, Device ID : 0x00150001
NAND Writing GPT...
eMMC Write OK! Elapsed time: 42.781250s (95.743 KiB/s)
NAND Writing SBL1...
eMMC Write OK! Elapsed time: 23.921875s (53.508 KiB/s)
NAND Writing SBL2...
eMMC Write OK! Elapsed time: 24.812500s (51.587 KiB/s)
NAND Writing PARAM...
eMMC Write OK! Elapsed time: 84.500000s (96.947 KiB/s)
NAND Writing ROM2...
eMMC Write OK! Elapsed time: 67.781250s (7.554 KiB/s)
All Done.
  Reply With Quote
Old 12-25-2013, 11:39   #195 (permalink)
No Life Poster
 
mccm's Avatar
 
Join Date: Aug 2005
Location: singapore
Age: 55
Posts: 2,430
Member: 173565
Status: Offline
Thanks Meter: 71
Sir i have a i9000 loaded with custom firmware before I flash it to stock firmware but fail with odin,now phone dead cant goes to download mode anymore.
May I have the instruction menu using easyjtag to retrieve it back alive,thank you.
  Reply With Quote
Reply
Page 13 of 51 « First 3101112 13 14151623 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 15:58.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.13521 seconds with 9 queries

SEO by vBSEO