UFS memory connection troubles, question, discuss thread - Page 18 - GSM-Forum

layder · 08-06-2022, 10:00

Quote:

Originally Posted by akamah

i have done all you said and when i resolder this ufs the device turns on completely ufs chip is ok bro

and sometimes after pressing identify button several times it passes over this error which i mentioned but it gives new error(reading at adrress 0000000000 error)

post chip full name (marking)

akamah · 08-06-2022, 17:41

Quote:

Originally Posted by layder

post chip full name (marking)

sec 122
KLUEG8UHDC-B0E1

akamah · 08-12-2022, 09:34

hello easy jtag team
i came across error when i wanned to write ufs firmware for SAMSUNG-KM2V8001CM-B707 chip
here is the log:

Write UFS Firmware.
Input file :C:\Program Files\Z3X\EASYJTAG\UFS Firmware\SAMSUNG-KM2V8001CM-B707.bin
Getting Firmware information from file name
Update Firmware
Can't write firmware to chip, Code: -405, Reason: UAP SCSI: Command sense: ILLEGAL_REQUEST
Done.
thanks in advanced

md.sufyan · 11-18-2022, 06:07

Easy jtag plus ufs chip connection error

Ufs init failed. Error : -112. Reason: can't boot device

1R0niC · 11-25-2022, 18:02

support for samsung micron UFS will be released soon ?

niwahal2015 · 12-04-2022, 14:59

ufs 2.2 need help

Health:
Device life time method A: 0x03 (20%-30% device life time used)
Device life time method B: 0x04 (30%-40% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)

Write UFS Chip Config.
Can't write Configuration from file, Code: -2303, Reason: UTP: UPIU QUERY result fail: General failure
Done.

abofesl · 12-06-2022, 21:02

its 2.5 MBPS On Moorc 3 in 1 UFS Socket

Ashim Ashram · 01-16-2023, 15:33

help guys

Z3X Card Serial: AADDE0C9
EasyJtag Plus Box Found at: COM27
EasyJtag Plus Box Firmware: 2.53.2

Source: EasyJtag Port [UFS]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
UFS Power Mode: LOW
Scanner Thread Created..

Running EasyJtag UFS Mode...
UFS ISP Mode: ON
UFS Safe Mode: ON

UFS: Socket Info:
S/N: 0x0123D1B3252FDFB5EE
Desc: EasyJTAG UFS Socket BGA-254 by EasyJTAG 27.09.22
Type: EasyJtag UFS Socket BGA-254
ID: 9697

Initialize UFS Engine Fail. Code: -60/ERROR_UFS_BOX_INIT_LINK_AFC

Scanner Thread Terminated
Elapsed: 00:00:00:676
Found 0 Partition(s)..

Search Partitions Fail..
Check Socket/UFS Chip and Try Again..

help please

http://ibb.co/VjKqFqf

FrunzyGSM · 01-25-2023, 12:25

Hello! I need some help, on my easy jtag plus and easyjtag ufs254 isp adapter , on 3 from 5 phone with ufs 3.1 chip, first time identify chip works very nice, then if i press second time identify get error 113, then 3rd time works identify correct, 4th not work.....any ideea????
i will atach a video to show the problem better!
thanks! kind regards!
https://youtube.com/shorts/WKzQU9voe0Y?feature=share

layder · 01-25-2023, 13:30

Quote:

Originally Posted by Ashim Ashram

Initialize UFS Engine Fail. Code: -60/ERROR_UFS_BOX_INIT_LINK_AFC

https://forum.gsmhosting.com/vbb/f67.../#post14724221

theoloco · 02-02-2023, 00:31

hallo data recovery from ufs 3.1 KLUEG8UHDC is possible?
and what the best setup to buy easy jtag or mipi ?

theoloco · 02-02-2023, 00:56

hallo data recovery from ufs 3.1 KLUEG8UHDC is possible?
and what the best setup to buy ?

backbiter17 · 02-02-2023, 08:27

Quote:

Originally Posted by theoloco

hallo data recovery from ufs 3.1 KLUEG8UHDC is possible?
and what the best setup to buy ?

not possible, data encrypted

johnoroo37 · 05-19-2023, 21:01

Selected pinout: GEN2 High Speed Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.8.0.4
UFS Socket Info.
Serial: 01235ED5408B79B5EE
Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 22.05.21

Identify UFS Chip.
UFS Chip Voltage: Low
Can't init device, Code: -112, Reason: Can't boot device
VCC: 3306mV
VCCQ2: 1943mV

Chip Info:
Manufacturer: SKhynix
ProductName: H9HQ21AFAMADAR
SerialNumber: 0x2520B55CAB20
OemID: 01AD
UFS Reference Clock: 19.2MHz
UFS Version: 2.2
Done.

johnoroo37 · 05-19-2023, 21:12

Selected pinout: GEN2 High Speed Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.8.0.4
UFS Socket Info.
Serial: 01235ED5408B79B5EE
Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 22.05.21

Identify UFS Chip.
UFS Chip Voltage: Low
Can't init device, Code: -112, Reason: Can't boot device
VCC: 3306mV
VCCQ2: 1943mV

Chip Info:
Manufacturer: SKhynix
ProductName: H9HQ21AFAMADAR
SerialNumber: 0x2520B55CAB20
OemID: 01AD
UFS Reference Clock: 19.2MHz
UFS Version: 2.2
Done.

08-12-2022, 09:34	#258 (permalink)
akamah Freak Poster Join Date: Sep 2018 Location: korea Posts: 141 Member: 2863121 Status: Offline Thanks Meter: 11	ufs SAMSUNG-KM2V8001CM-B707 firmware update error hello easy jtag team i came across error when i wanned to write ufs firmware for SAMSUNG-KM2V8001CM-B707 chip here is the log: Write UFS Firmware. Input file :C:\Program Files\Z3X\EASYJTAG\UFS Firmware\SAMSUNG-KM2V8001CM-B707.bin Getting Firmware information from file name Update Firmware Can't write firmware to chip, Code: -405, Reason: UAP SCSI: Command sense: ILLEGAL_REQUEST Done. thanks in advanced

11-18-2022, 06:07	#259 (permalink)
md.sufyan Insane Poster Join Date: Mar 2016 Posts: 91 Member: 2543662 Status: Offline Thanks Meter: 401	Easy jtag plus ufs chip connection error Ufs init failed. Error : -112. Reason: can't boot device Last edited by md.sufyan; 11-18-2022 at 13:44.

01-16-2023, 15:33	#263 (permalink)
Ashim Ashram Freak Poster Join Date: Dec 2017 Location: Uganda Posts: 109 Member: 2793734 Status: Offline Thanks Meter: 29	help guys Z3X Card Serial: AADDE0C9 EasyJtag Plus Box Found at: COM27 EasyJtag Plus Box Firmware: 2.53.2 Source: EasyJtag Port [UFS] Generation: GPT [QC/SAMS/BCM/INTEL/MTK] UFS Power Mode: LOW Scanner Thread Created.. Running EasyJtag UFS Mode... UFS ISP Mode: ON UFS Safe Mode: ON UFS: Socket Info: S/N: 0x0123D1B3252FDFB5EE Desc: EasyJTAG UFS Socket BGA-254 by EasyJTAG 27.09.22 Type: EasyJtag UFS Socket BGA-254 ID: 9697 Initialize UFS Engine Fail. Code: -60/ERROR_UFS_BOX_INIT_LINK_AFC Scanner Thread Terminated Elapsed: 00:00:00:676 Found 0 Partition(s).. Search Partitions Fail.. Check Socket/UFS Chip and Try Again.. help please http://ibb.co/VjKqFqf Last edited by layder; 01-16-2023 at 15:39. Reason: merge 2 posts to one

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-25-2022, 18:02	#260 (permalink)
1R0niC No Life Poster Join Date: Jan 2014 Location: San Luis Potosi, Mexico Posts: 571 Member: 2109200 Status: Offline Thanks Meter: 44	support for samsung micron UFS will be released soon ?

12-04-2022, 14:59	#261 (permalink)
niwahal2015 Junior Member Join Date: Oct 2015 Posts: 12 Member: 2469387 Status: Offline Thanks Meter: 0	ufs 2.2 need help Health: Device life time method A: 0x03 (20%-30% device life time used) Device life time method B: 0x04 (30%-40% device life time used) Pre End of Life: 0x01 (Used less then 80% of reserved blocks) Write UFS Chip Config. Can't write Configuration from file, Code: -2303, Reason: UTP: UPIU QUERY result fail: General failure Done.

12-06-2022, 21:02	#262 (permalink)
abofesl Junior Member Join Date: Dec 2022 Location: syria Posts: 16 Member: 3026822 Status: Offline Thanks Meter: 2	its 2.5 MBPS On Moorc 3 in 1 UFS Socket

01-25-2023, 12:25	#264 (permalink)
FrunzyGSM Freak Poster Join Date: Mar 2004 Age: 42 Posts: 179 Member: 56948 Status: Offline Thanks Meter: 15	Hello! I need some help, on my easy jtag plus and easyjtag ufs254 isp adapter , on 3 from 5 phone with ufs 3.1 chip, first time identify chip works very nice, then if i press second time identify get error 113, then 3rd time works identify correct, 4th not work.....any ideea???? i will atach a video to show the problem better! thanks! kind regards! https://youtube.com/shorts/WKzQU9voe0Y?feature=share

02-02-2023, 00:31	#266 (permalink)
theoloco Junior Member Join Date: Feb 2023 Location: germany Posts: 5 Member: 3031045 Status: Offline Thanks Meter: 0	hallo data recovery from ufs 3.1 KLUEG8UHDC is possible? and what the best setup to buy easy jtag or mipi ?

02-02-2023, 00:56	#267 (permalink)
theoloco Junior Member Join Date: Feb 2023 Location: germany Posts: 5 Member: 3031045 Status: Offline Thanks Meter: 0	hallo data recovery from ufs 3.1 KLUEG8UHDC is possible? and what the best setup to buy ?

05-19-2023, 21:01	#269 (permalink)
johnoroo37 No Life Poster Join Date: Sep 2013 Location: INSIDE YOUR MIND Posts: 1,309 Member: 2025428 Status: Offline Thanks Meter: 449	Selected pinout: GEN2 High Speed Pinout Change EasyJTAG Pinout OK Z3X EasyJtag Software ver. 3.8.0.4 UFS Socket Info. Serial: 01235ED5408B79B5EE Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 22.05.21 Identify UFS Chip. UFS Chip Voltage: Low Can't init device, Code: -112, Reason: Can't boot device VCC: 3306mV VCCQ2: 1943mV Chip Info: Manufacturer: SKhynix ProductName: H9HQ21AFAMADAR SerialNumber: 0x2520B55CAB20 OemID: 01AD UFS Reference Clock: 19.2MHz UFS Version: 2.2 Done.

05-19-2023, 21:12	#270 (permalink)
johnoroo37 No Life Poster Join Date: Sep 2013 Location: INSIDE YOUR MIND Posts: 1,309 Member: 2025428 Status: Offline Thanks Meter: 449	Selected pinout: GEN2 High Speed Pinout Change EasyJTAG Pinout OK Z3X EasyJtag Software ver. 3.8.0.4 UFS Socket Info. Serial: 01235ED5408B79B5EE Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 22.05.21 Identify UFS Chip. UFS Chip Voltage: Low Can't init device, Code: -112, Reason: Can't boot device VCC: 3306mV VCCQ2: 1943mV Chip Info: Manufacturer: SKhynix ProductName: H9HQ21AFAMADAR SerialNumber: 0x2520B55CAB20 OemID: 01AD UFS Reference Clock: 19.2MHz UFS Version: 2.2 Done.