Step by step... how to unlock azalis288 100% work!!!!! - GSM-Forum

DarkSkir · 10-04-2002, 22:37

1.use all philips serv.software by andy delock
2.check azalis 238 type 1(2M flash)
3.open flsh file(azalis 2m_cloned flash file) see old post
4.Set speed to 38400
5.press write flash
6.when phone is flashed press tat mode
7.go to eep section edit and selecz sector 11
8.paste this in sect. 11 and press write section
1D 07 01 E4 31 32 33 34 98 12 04 59 74 36 55 84
72 99 27 90 FF FF FF FF 00 00 00 0A FF FF FF FF
FF FF FF FF 00 01 FF FF FF FF FF FF FF FF FF FF
00 02 00 00 FF FF FF FF FF FF FF FF 00 03 00 00
FF FF FF FF FF FF FF FF 00 04 00 00 0A 00 00 00
00 00 00 00 62 F2 00 30 00 FF 00 00 00 FF 00 00
00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 00
00 FF 00 00 FF FF 00 00 00 FF 00 00 FF FF FF FF
FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00
FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00
FF FF 00 00 FF FF FF FF FF FF 00 00 FF FF 00 00
FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00
FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF FF FF
FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00
FF FF 00 00
9.press tat mode again
10.when phone is in tat mode press restore default section

Solution work perfect and tested by my

b.r.

dominik · 10-05-2002, 08:49

What abaut Azalis 288 whith flash 4M
Regards

DarkSkir · 10-05-2002, 12:47

work without flashing
Press only tat mode and restore sect.
thats all

dominik · 10-05-2002, 13:23

DarkSkir can you send me this software.
Thanks Regards
[email protected]

DarkSkir · 10-06-2002, 20:57

see old post all philips service software

*MaTeOoSh* · 10-12-2002, 15:02

Hi all

I have a "little big" problem with aza 288 and Delok - phone enters tat mode, but software still saying "Waiting for ignition" ... And when I tryed to flash him - after loading boot phone answers FF 00 FF 0D 00 48 1C 60 30 81 and freezez ... Any help ?

DarkSkir · 10-13-2002, 21:56

When you will flash the phone you dont need push tat mode buton.
Only load file to program,set speed to 38400 and put write flash.

Thats all

bop_gsm · 10-13-2002, 22:32

hi all
i need this flash
plz i need help
thx

DarkSkir · 10-15-2002, 00:26

Today I found this

hone charging normal but can not charge the batery with this flash!!!!!
I put back the original flash,all normal but locked!!
What is the solution for this problem???

nab · 10-18-2002, 01:27

how about putting in old flash
get codes using reader
put original flash back
type in codes ...

DarkSkir · 10-19-2002, 00:20

Can not read codes!!!!!

nab · 10-19-2002, 11:02

Darksir, you should be able to, as only the new firmware prevents reading of protected area. Or maybe the Old flash is still too new.

gsmsalers · 11-06-2002, 14:35

Hi.
I need this delock soft. Who can help me?
Thanks for attention.

10-04-2002, 22:37	#1 (permalink)
DarkSkir No Life Poster Join Date: Jun 2002 Location: Bosnien Age: 43 Posts: 901 Member: 12904 Status: Offline Sonork: 100.1576801 Thanks Meter: 409	Step by step... how to unlock azalis288 100% work!!!!! 1.use all philips serv.software by andy delock 2.check azalis 238 type 1(2M flash) 3.open flsh file(azalis 2m_cloned flash file) see old post 4.Set speed to 38400 5.press write flash 6.when phone is flashed press tat mode 7.go to eep section edit and selecz sector 11 8.paste this in sect. 11 and press write section 1D 07 01 E4 31 32 33 34 98 12 04 59 74 36 55 84 72 99 27 90 FF FF FF FF 00 00 00 0A FF FF FF FF FF FF FF FF 00 01 FF FF FF FF FF FF FF FF FF FF 00 02 00 00 FF FF FF FF FF FF FF FF 00 03 00 00 FF FF FF FF FF FF FF FF 00 04 00 00 0A 00 00 00 00 00 00 00 62 F2 00 30 00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 00 FF FF 00 00 00 FF 00 00 FF FF FF FF FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF FF FF FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF FF FF FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 FF FF 00 00 9.press tat mode again 10.when phone is in tat mode press restore default section Solution work perfect and tested by my b.r.

10-15-2002, 00:26	#9 (permalink)
DarkSkir No Life Poster Join Date: Jun 2002 Location: Bosnien Age: 43 Posts: 901 Member: 12904 Status: Offline Sonork: 100.1576801 Thanks Meter: 409	Today I found thishone charging normal but can not charge the batery with this flash!!!!! I put back the original flash,all normal but locked!! What is the solution for this problem???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BB5 UNLOCKING step-by-steps 100% working	khem	Nokia Base Band 5 ( BB-5 )	3	05-14-2007 08:22
How to unlock K608i and work in 2G network	amehdi	Cruiser Suite	1	06-05-2006 17:04
How to work with the terminator Step by step !!	GSM SNIPER	Sony Ericsson	3	05-30-2004 11:54
how to unlock azalis288 2mg loop	BLIDA	Philips	2	10-15-2002 12:31

10-05-2002, 08:49	#2 (permalink)
dominik No Life Poster Join Date: Jul 2001 Posts: 877 Member: 5389 Status: Offline Thanks Meter: 1	What abaut Azalis 288 whith flash 4M Regards

10-05-2002, 12:47	#3 (permalink)
DarkSkir No Life Poster Join Date: Jun 2002 Location: Bosnien Age: 43 Posts: 901 Member: 12904 Status: Offline Sonork: 100.1576801 Thanks Meter: 409	work without flashing Press only tat mode and restore sect. thats all

10-05-2002, 13:23	#4 (permalink)
dominik No Life Poster Join Date: Jul 2001 Posts: 877 Member: 5389 Status: Offline Thanks Meter: 1	DarkSkir can you send me this software. Thanks Regards [email protected]

10-06-2002, 20:57	#5 (permalink)
DarkSkir No Life Poster Join Date: Jun 2002 Location: Bosnien Age: 43 Posts: 901 Member: 12904 Status: Offline Sonork: 100.1576801 Thanks Meter: 409	see old post all philips service software

10-12-2002, 15:02	#6 (permalink)
MaTeOoSh No Life Poster Join Date: Dec 2000 Location: gsmdoctor.pl Age: 48 Posts: 1,317 Member: 2755 Status: Offline Thanks Meter: 42	Hi all I have a "little big" problem with aza 288 and Delok - phone enters tat mode, but software still saying "Waiting for ignition" ... And when I tryed to flash him - after loading boot phone answers FF 00 FF 0D 00 48 1C 60 30 81 and freezez ... Any help ?

10-13-2002, 21:56	#7 (permalink)
DarkSkir No Life Poster Join Date: Jun 2002 Location: Bosnien Age: 43 Posts: 901 Member: 12904 Status: Offline Sonork: 100.1576801 Thanks Meter: 409	When you will flash the phone you dont need push tat mode buton. Only load file to program,set speed to 38400 and put write flash. Thats all

10-13-2002, 22:32	#8 (permalink)
bop_gsm Banned Join Date: May 2002 Location: GERMANY Age: 43 Posts: 1,626 Member: 11549 Status: Offline Thanks Meter: 6	hi all i need this flash plz i need help thx

10-18-2002, 01:27	#10 (permalink)
nab No Life Poster Join Date: Apr 2001 Location: UK and PAKISTAN Posts: 643 Member: 4315 Status: Offline Thanks Meter: 1	how about putting in old flash get codes using reader put original flash back type in codes ...

10-19-2002, 00:20	#11 (permalink)
DarkSkir No Life Poster Join Date: Jun 2002 Location: Bosnien Age: 43 Posts: 901 Member: 12904 Status: Offline Sonork: 100.1576801 Thanks Meter: 409	Can not read codes!!!!!

10-19-2002, 11:02	#12 (permalink)
nab No Life Poster Join Date: Apr 2001 Location: UK and PAKISTAN Posts: 643 Member: 4315 Status: Offline Thanks Meter: 1	Darksir, you should be able to, as only the new firmware prevents reading of protected area. Or maybe the Old flash is still too new.

11-06-2002, 14:35	#13 (permalink)
gsmsalers No Life Poster Join Date: Apr 2002 Location: Flash Age: 44 Posts: 1,943 Member: 11208 Status: Offline Thanks Meter: 11	Hi. I need this delock soft. Who can help me? Thanks for attention.