|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
| LinkBack | Thread Tools | Display Modes |
04-07-2012, 17:07 | #1 (permalink) |
No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42
Posts: 3,030
Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350 | All success stories Volcano BOX with Huawei, ZTE , Vodafone ,and other Last edited by Volcano Box; 04-17-2012 at 13:43. |
The Following 6 Users Say Thank You to LuisinhoCell For This Useful Post: |
04-10-2012, 14:05 | #4 (permalink) |
No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42
Posts: 3,030
Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350 | LG X335 Supported Read Info, Read Flash, Format, Write Imei and other Code: Connecting... Connecting... Hardware version:8A04 Hardware version:8A04 Software version:8A01 Software version:8A01 CPU TYPE:6235 CPU TYPE:6235 Internal version:0000 Internal version:0000 Boot downloading... 0Boot downloading... Flash ID: 00EC00B1 Flash ID: 00EC00B1 Flash Type: NAND_K9F1G16Q0M Flash Type: NAND_K9F1G16Q0M Chip Capacity: 0x8000000(128MB) Chip Capacity: 0x8000000(128MB) Mobile phone software version for:X335-00-V10j-724-XX-APR-14-2011 Mobile phone software version for:X335-00-V10j-724-XX-APR-14-2011 Baud adjust... Baud adjust... Read phone information success. Read phone information success. Detection initiated, connect the phone and power on it... Vcc: null Gnd: 5 RX: 3, TX: 2 2Connecting... Connecting... Hardware version:8A04 Hardware version:8A04 Software version:8A01 Software version:8A01 CPU TYPE:6235 CPU TYPE:6235 Internal version:0000 Internal version:0000 Boot downloading... Boot downloading... Flash ID: 00EC00B1 Flash ID: 00EC00B1 Flash Type: NAND_K9F1G16Q0M Flash Type: NAND_K9F1G16Q0M Chip Capacity: 0x8000000(128MB) Chip Capacity: 0x8000000(128MB) Mobile phone software version for:X335-00-V10j-724-XX-APR-14-2011 Mobile phone software version for:X335-00-V10j-724-XX-APR-14-2011 Baud adjust... Baud adjust... Flash reading... Flash reading... Spend time: 1734.5 s Spend time: 1734.5 s The data has been saved in C:\Documents and Settings\Luisinho\Desktop\Firmware\Ching Link\lg\A7267_BRAZIL_BOOTLOADER_V005_MT6235B_X335-00-V10J-724-XX-APR-14-V005.bin, size: 132 M. 2012-04-09 16:24:50 >>C:\Arquivos de programas\Volcano Team\VolcanoBox\PrtScn\PIC_2012_04_09_16_24_49.jpg saved. Last edited by LuisinhoCell; 04-10-2012 at 14:10. |
The Following 4 Users Say Thank You to LuisinhoCell For This Useful Post: |
04-10-2012, 15:39 | #5 (permalink) |
No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42
Posts: 3,030
Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350 | ZTE X760 Read Info Code: Detection initiated, connect the phone and power on it... Vcc: null Gnd: 2 RX: 7, TX: 9 Connecting... Hardware version:8A03 Software version:8A00 CPU TYPE:6225 Internal version:0000 CPUID :035D0A00 Boot downloading complete! Flash ID: 0001227E Flash Type: NOR_S29WS128N Chip Capacity: 0x1000000(16MB) Mobile phone software version for:X760_Z1_P_B07A108 Baud adjust...complete. >>Read phone information success. Code: Vcc: null Gnd: null RX: 7, TX: 9 Connecting... Hardware version:8A03 Software version:8A00 CPU TYPE:6225 Internal version:0000 CPUID :035D0A00 Boot downloading complete! Flash ID: 0001227E Flash Type: NOR_S29WS128N Chip Capacity: 0x1000000(16MB) Mobile phone software version for:X760_Z1_P_B07A108 Baud adjust...complete. Flash reading complete! 0000[User Lock] Found 1 possible passwords. The data has been saved in C:\Documents and Settings\Luisinho\Desktop\Firmware\Ching Link\ZTe\ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X760_Z1_P_B07A108.BIN, size: 16 M. Detection initiated, connect the phone and power on it... Code: Vcc: null Gnd: 2 RX: 7, TX: 9 Connecting... Hardware version:8A03 Software version:8A00 CPU TYPE:6225 Internal version:0000 Connecting, please hold on the power key... Can loosen the phone is switched on key Start analysis flash internal data. >>Solution of complete network lock. |
The Following 3 Users Say Thank You to LuisinhoCell For This Useful Post: |
04-10-2012, 16:27 | #6 (permalink) |
No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42
Posts: 3,030
Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350 | Alcatel One Touch 678G Read Info Code: Gnd: 7 8 Detection initiated... D+ = 4, D- = 3 Detection D+/D- with 17,09 seconds! Continue to detect BOOT pin... BOOT(Pull Up) = 5 Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) Detection completed. Setting pinouts... Find USB device:SCI USB2Serial (COM69), (VID_1782&PID_4D00) Pinout setting complete. Internal version: Spreadtrum Boot Block version 2.0 Boot downloaded. CPU TYPE:SC6600L [66007019] FLASH ID:00EC225400000000 Flash Type: NOR_K5N6433ATM Size:0x800000(8MB) Start analysis flash internal data. IMEI1: 012871002486413 IMEI2: 910575601400468 NV Addr: 0x2948A422 Product Information Addr: 0x910A451C MMI Resource Addr: 0x917239C0 Format Start Addr: 0x000000 Format End Addr: 0x000000 Code: Detection initiated... Vcc: null Gnd: 7 8 Analyzing D+ and D-... D+ = 4, D- = 3 Detection D+/D- with 1,36 seconds. Continue to detect BOOT pin... Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) BOOT(Pull Up) = 5 Setting... Find USB device:SCI USB2Serial (COM69), (VID_1782&PID_4D00) Pinouts setting complete! Internal version: Spreadtrum Boot Block version 2.0 Boot downloaded. Start boot please wait a moment.... BOOT Ver: Spreadtrum Boot Block version 1.2 CPU TYPE:SC6600L [66007019] FLASH ID: 00EC225400000000 Flash Type: NOR_K5N6433ATM Size:0x800000(8MB) Reading completed. >>The data has been saved in C:\Documents and Settings\Luisinho\Desktop\Firmware\Ching Link\Alcatel\OneTouch_678G__20120410_121823_FullFlash.bin, size: 8 M. |
The Following 2 Users Say Thank You to LuisinhoCell For This Useful Post: |
04-11-2012, 20:30 | #7 (permalink) |
No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42
Posts: 3,030
Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350 | ZTE N290 Format Code: Detection initiated, connect the phone and power on it... Vcc: null Gnd: null RX: 3, TX: 19 Connecting... Hardware version:8A04 Software version:8A01 CPU TYPE:6235 Internal version:0000 Boot downloading complete! Flash ID: 00AD0076 Flash Type: NAND_HY27XS08121M Chip Capacity: 0x4000000(64MB) Mobile phone software version for:CLARO_ISDB_900B_P107A2V1.0.0B07 Baud adjust...complete. Format parameters may cause not switch on mobile phones, if continue to format please adjust rate 115200 try again. Format range: Start Address: 0x2000000,Format Length :0x2000000 Flash erasing complete! Code: Detection initiated, connect the phone and power on it... Vcc: null Gnd: null RX: 3, TX: 19 Connecting... Hardware version:8A04 Software version:8A01 CPU TYPE:6235 Internal version:0000 Boot downloading complete! Flash ID: 00AD0076 Flash Type: NAND_HY27XS08121M Chip Capacity: 0x4000000(64MB) Mobile phone software version for:CLARO_ISDB_900B_P107A2V1.0.0B07 Baud adjust...complete. Flash reading complete! Spend time: 911.5 s >>The data has been saved in C:\Documents and Settings\Luisinho\Desktop\Firmware\Ching Link\ZTe\b+^RZTENJ35_09A_BOOTLOADER_V005_MT6235B_AAT_ISDB_900B_P107A2V1_0_0B0V005.bin, size: 66 M. Code: Vcc: null Gnd: null RX: 3, TX: 19 Available Ports:COM1 COM12 COM22 COM52 Mobile Information: Baseband chip Version:MT6235, E04 DSP Firmware Version:2000.00.00 DSP Patch Version:1.0 Software Version:CLARO_ISDB_900B_P107A2V1.0.0B07 Hardware Version:09A ZZTENJ35_09A Audio Version:Melody V0.0 CPUID:00000300 UserCode:1122 IMEI1:355473026001458 >>IMEI2:000000000000000 Code: Detection initiated, connect the phone and power on it... Vcc: null Gnd: null RX: 3, TX: 19 Connecting... Hardware version:8A04 Software version:8A01 CPU TYPE:6235 Internal version:0000 Connecting, please hold on the power key... Can loosen the phone is switched on key Start analysis flash internal data. >>Solution of complete network lock. |
04-17-2012, 13:40 | #8 (permalink) |
No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42
Posts: 3,030
Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350 | Huawei G6600 Read Info Code: Vcc: null Gnd: 5 RX: 2, TX: 3 Connecting... Hardware version:8A04 Software version:8A01 CPU TYPE:6235 Internal version:0000 Boot downloading complete! Flash ID: 00200036 Flash Type: NAND_ST512R3A Chip Capacity: 0x4000000(64MB) Mobile phone software version for:E5.2BX01V01.08 Baud adjust...complete. Read phone information success. Code: Vcc: null Gnd: 5 RX: 2, TX: 3 Connecting... Hardware version:8A04 Software version:8A01 CPU TYPE:6235 Internal version:0000 Connecting, please hold on the power key... Can loosen the phone is switched on key Start analysis flash internal data. Solution of complete network lock. Code: Vcc: null Gnd: 5 RX: 2, TX: 3 Connecting... Hardware version:8A04 Software version:8A01 CPU TYPE:6235 Internal version:0000 Boot downloading complete! Flash ID: 00200036 Flash Type: NAND_ST512R3A Chip Capacity: 0x4000000(64MB) Mobile phone software version for:E5.2BX01V01.08 Baud adjust...complete. Flash reading complete! Spend time: 913.2 s usercode:1234 >>The data has been saved in C:\Documents and Settings\Luisinho\Desktop\Firmware\Ching Link\Huawei\BYD35_09A_PMWY_BOOTLOADER_V005_MT6235B_E5_2BX01V01_08.bin, size: 66 M. Last edited by LuisinhoCell; 04-17-2012 at 13:50. |
04-26-2012, 15:20 | #10 (permalink) |
No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42
Posts: 3,030
Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350 | Huawei 6620S Read Info Code: Vcc: null Gnd: 5 RX: 3, TX: 2 Connecting... Hardware version:8A02 Software version:8A00 CPU TYPE:6253 Internal version:0000 Boot downloading complete! Flash ID: 0098005F Flash Type: NOR_TC58FYM8T8D Chip Capacity: 0x2000000(32MB) Mobile phone software version for:G6620SS_C86_M40_05_01 Baud adjust...complete. >>Read phone information success. Code: Gnd: 5 RX: 3, TX: 2 Connecting... Hardware version:8A02 Software version:8A00 CPU TYPE:6253 Internal version:0000 Boot downloading complete! Flash ID: 0098005F Flash Type: NOR_TC58FYM8T8D Chip Capacity: 0x2000000(32MB) Mobile phone software version for:G6620SS_C86_M40_05_01 Baud adjust...complete. Format parameters may cause not switch on mobile phones, if continue to format please adjust rate 115200 try again. Format range: Start Address: 0x1C00000,Format Length :0x400000 >>Flash erasing complete! Code: Analyzing Rx and Tx... MT6253, RX: 3, TX: 2 Setting... Pinouts setting complete! Waiting for phone's response,please press Power on/off button... Connecting... Hardware version:8A02 Software version:8A00 CPU TYPE:6253 Internal version:0000 Connecting, please hold on the power key... Can loosen the phone is switched on key Start analysis flash internal data. Solution of complete network lock. Last edited by LuisinhoCell; 04-26-2012 at 15:28. |
04-27-2012, 12:55 | #11 (permalink) |
Insane Poster Join Date: Mar 2008 Location: SHAHKOT [NANKAN SAHIB]
Posts: 64
Member: 729392 Status: Offline Sonork: YAHOO Thanks Meter: 3 | Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 1:11:33 PM+++++++++++++++++++ -------------------Created: 4/24/2012 1:11:40 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 1:11:47 PM+++++++++++++++++++ -------------------Created: 4/24/2012 1:12:08 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 1:12:14 PM+++++++++++++++++++ -------------------Created: 4/24/2012 1:12:28 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 1:12:34 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:02:06 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=Auto-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 2:02:13 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:02:22 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Failed to set Flash parameters... +++++++++++++++++++End at: 4/24/2012 2:02:36 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:02:56 PM------------------- Chip=SpreadTrum Action=Format FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Failed to set Flash parameters... +++++++++++++++++++End at: 4/24/2012 2:03:10 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:03:18 PM------------------- Chip=SpreadTrum Action=Format FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Failed to set Flash parameters... +++++++++++++++++++End at: 4/24/2012 2:03:32 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:04:12 PM------------------- Chip=SpreadTrum Action=Format FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 115200 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Reading FileSystem info... FileSystem Version: 0A Start=0x003B0000, Size=0x00050000 Unlocking all blocks before program/erase... Unlock Done. Auto formatting... Done. +++++++++++++++++++End at: 4/24/2012 2:04:39 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:06:54 PM------------------- Chip=SpreadTrum Action=Reset FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 115200 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Unlocking all blocks before program/erase... Unlock Done. Analyzing FileSystem... Done. Reset the user data area... Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action. All Done. +++++++++++++++++++End at: 4/24/2012 2:07:13 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:26:36 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 115200 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=352396060020209 IMEI 2=910575601400468 ------Auto Format Address------- Start=0x003B0000 Size =0x00050000 Read FS info...done +++++++++++++++++++End at: 4/24/2012 2:26:56 PM+++++++++++++++++++ -------------------Created: 4/26/2012 1:58:03 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=Ver3.1108 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=MT6252 CPU_ID=00000007 NOR_ID=00EF004000150000 NOR_Size=0MB NOR_Name=Unsupport Flash NOR_DieCnt= NAND_ID=0000000000000000 NAND_Size=0MB NAND_Name=Nand:N/A Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=21 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6252, HardwareVer:8B00, SoftwareVer:CA05 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 00EF004000150000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... ProjectID Not Found. +++++++++++++++++++End at: 4/26/2012 1:58:15 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:00:13 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=InternalRamBoot Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=MT6252 CPU_ID=00000007 NOR_ID=00EF004000150000 NOR_Size=2MB NOR_Name=SF_W25Q16CV NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=21 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... BB:6252, HardwareVer:8B00, SoftwareVer:CA05 Loading boot... Boot init completed. Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Reading phone HW info... Read info is done. BB: MT6252 Flash: SF_W25Q16CV setting the Flash Parameters... Settings have been completed! Changing baudrate... Set baudrate to 921600 ...ok +++++++++++++++++++End at: 4/26/2012 2:00:20 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:00:31 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=Ver3.1108 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=MT6252 CPU_ID=00000007 NOR_ID=00EF004000150000 NOR_Size=0MB NOR_Name=Unsupport Flash NOR_DieCnt= NAND_ID=0000000000000000 NAND_Size=0MB NAND_Name=Nand:N/A Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=21 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6252, HardwareVer:8B00, SoftwareVer:CA05 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 00EF004000150000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... ProjectID Not Found. +++++++++++++++++++End at: 4/26/2012 2:00:43 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:17:59 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=Ver3.1108 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. User abort, freeing Download Agent, please wait... +++++++++++++++++++End at: 4/26/2012 2:18:07 PM+++++++++++++++++++ Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. User abort, freeing Download Agent, please wait... The process stopped. +++++++++++++++++++End at: 4/26/2012 2:18:08 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:18:20 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=Ver3.848 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=MT6253 CPU_ID=0000000F NOR_ID=0089890300000000 NOR_Size=16MB NOR_Name=[INTEL] PF38F30xxM0x1xx NOR_DieCnt= NAND_ID=0000000000000000 NAND_Size=0MB NAND_Name=Nand:N/A Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0089890300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: D35_GFIVE_IT64H_CIF_V05 +++++++++++++++++++End at: 4/26/2012 2:19:05 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:19:16 PM------------------- Chip=MTK Action=Format FlashType=NOR boot=Ver3.848 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. User abort, freeing Download Agent, please wait... +++++++++++++++++++End at: 4/26/2012 2:19:48 PM+++++++++++++++++++ Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. User abort, freeing Download Agent, please wait... The process stopped. +++++++++++++++++++End at: 4/26/2012 2:19:49 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:19:57 PM------------------- Chip=MTK Action=Format FlashType=NOR boot=Ver3.848 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=MT6253 CPU_ID=0000000F NOR_ID=0089890300000000 NOR_Size=16MB NOR_Name=[INTEL] PF38F30xxM0x1xx NOR_DieCnt= NAND_ID=0000000000000000 NAND_Size=0MB NAND_Name=Nand:N/A Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0089890300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: D35_GFIVE_IT64H_CIF_V05 Changing baudrate to 115200... Done. Formatting Flash... AutoFormat address: start=0x00E00000, size=0x00200000 All Done +++++++++++++++++++End at: 4/26/2012 2:20:50 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:21:22 PM------------------- Chip=MTK Action=IMEI FlashType=NOR boot=Ver3.848 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 Initializing... DA_LIB_VER_4.0.3.2 Tip: The phone must be able to power-on normally It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Read info...ok, Waitting enter meta... Connected...can release Power button now, tracking... IMEI=358688000000158 IMEI=358688000000158 Rebulid IMEI1=353056241231327 Rebulid IMEI2=353056413213213 +++++++++++++++++++End at: 4/26/2012 2:22:00 PM+++++++++++++++++++ |
05-11-2012, 14:34 | #13 (permalink) |
No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42
Posts: 3,030
Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350 | Phone Huawei G6608 Read Info Code: Detection initiated, connect the phone and power on it... Vcc: null Gnd: 5 Analyzing Rx and Tx... MT6235, RX: 3, TX: 2 Setting... Pinouts setting complete! Connecting... Hardware version:8C00 Software version:8A01 CPU TYPE:6235 Internal version:0000 Boot downloading complete! Flash ID: 009800D0 Flash Type: NAND_TC58NWM9S3B Chip Capacity: 0x4000000(64MB) Mobile phone software version for:G6608SDW.C147.M49.00.04 Baud adjust...complete. >>Read phone information success. Code: Detection initiated, connect the phone and power on it... Vcc: null Gnd: 5 Analyzing Rx and Tx... MT6235, RX: 3, TX: 2 Setting... Waiting for phone's response,please press Power on/off button... Connecting... Hardware version:8C00 Software version:8A01 CPU TYPE:6235 Internal version:0000 Boot downloading complete! Flash ID: 009800D0 Flash Type: NAND_TC58NWM9S3B Chip Capacity: 0x4000000(64MB) Mobile phone software version for:G6608SDW.C147.M49.00.04 Baud adjust...complete. Format range: Start Address: 0x2000000,Format Length :0x2000000 >>Flash erasing complete! Code: Detection initiated, connect the phone and power on it... Vcc: null Gnd: 5 Analyzing Rx and Tx... MT6235, RX: 3, TX: 2 Setting... Pinouts setting complete! Waiting for phone's response,please press Power on/off button.. Connecting... Hardware version:8C00 Software version:8A01 CPU TYPE:6235 Connecting, please hold on the power key... Can loosen the phone is switched on key Start analysis flash internal data. >>Solution of complete network lock. LuisinhoCell |
The Following 2 Users Say Thank You to LuisinhoCell For This Useful Post: |
Bookmarks |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
IR between 6150 and IBM TP 600 | favdijck | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 3 | 11-15-2011 13:08 |
Help with 6110 | paulomt1 | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 2 | 05-25-2009 16:29 |
wt603 and .pkd | ARt | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 0 | 06-13-1999 19:18 |
Netmonitor with FBus???? | ratzfatz | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 4 | 06-09-1999 17:04 |
|