🐙 Octoplus/Octopus Box LG Software 2.9.1 is out! 🐙 - Page 2 - GSM-Forum

Octopus box · 12-14-2018, 06:17

Post full Software log, not reduced. What firmware version was in your device at the beginning exactly?

kimanh_gsm · 12-14-2018, 08:01

Hi

LG SP200 flash done SP20013b_to_X210ULMA10d_for_unlock.oct by ''install_octopus_LG_2.8.9.5_lite.exe'' hang logo LG K8+, Writing EEPROM error

Quote:

Welcome to Octoplus/Octopus Box LG Software version 2.9.1
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM56
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM317
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...OK
Opening "SP200_35198009552696_30-10-2018_17-59-38.eep"...OK
Writing EEPROM...OK
EEPROM succesfully repaired.
Performed by 2.9.1 Software version.

Writing EEPROM ok new Octopus Box LG Software 2.9.1, still hang logo LG K8+

Octopus box · 12-14-2018, 09:08

Currently we don't have firmwares for SP200. If You also can't find firmware, You can repair device via eMMC.

Octopus box · 12-14-2018, 09:16

@ Mr_F10ch3

Error with writing modem:

Quote:

Writing 2/6 modem...Failed!

is because of You use firmware ("LS777ZV6_03.tot"), which was read out from another device. As was written many times earlier, firmwares, which were read out from devices, don't contain partitions' signatures, so it is not possible to write them via Download Mode, it is possible to write such partitions only via eMMC.

Atifs6e · 12-14-2018, 14:40

good costum paration
waiting for long time this

Mr_F10ch3 · 12-14-2018, 15:32

Quote:

Originally Posted by Octopus box

@ Mr_F10ch3

Error with writing modem:

is because of You use firmware ("LS777ZV6_03.tot"), which was read out from another device. As was written many times earlier, firmwares, which were read out from devices, don't contain partitions' signatures, so it is not possible to write them via Download Mode, it is possible to write such partitions only via eMMC.

I know that, i was only testing and confirming that, to all people who is asking same question....

i can't find LS777 original firmware any way

androidone · 12-14-2018, 19:24

so, what's the solution for ls777

Mr_F10ch3 · 12-14-2018, 21:17

Quote:

Originally Posted by androidone

so, what's the solution for ls777

Only EMMC method with medusa pro till now.

Mr_F10ch3 · 12-14-2018, 21:30

Quote:

Originally Posted by kimanh_gsm

Hi

LG SP200 flash done SP20013b_to_X210ULMA10d_for_unlock.oct by ''install_octopus_LG_2.8.9.5_lite.exe'' hang logo LG K8+, Writing EEPROM error

Writing EEPROM ok new Octopus Box LG Software 2.9.1, still hang logo LG K8+

You can solve your problem following this http://forum.gsmhosting.com/vbb/13458025-post14.html

Anatonimico · 12-16-2018, 00:26

please add UNLOCK for lg ls777 software version zvf

Datchou 0r · 12-19-2018, 02:58

add lm-x410asr pleaes

Octopus box · 12-19-2018, 09:59

Quote:

Originally Posted by Datchou 0r

add lm-x410asr pleaes

We work in this, unfortunately, still no solution at the moment.

ppdavisito · 12-19-2018, 16:47

Quote:

Originally Posted by kimanh_gsm

Hi

LG SP200 flash done SP20013b_to_X210ULMA10d_for_unlock.oct by ''install_octopus_LG_2.8.9.5_lite.exe'' hang logo LG K8+, Writing EEPROM error

Writing EEPROM ok new Octopus Box LG Software 2.9.1, still hang logo LG K8+

Bro you need LG up Developer for save the cell,its happen to me and i save the cell, mark option in LG UP of Chip erase and then write flash X210ULMA10d.kdz

nguyenthaiau · 12-22-2018, 08:38

please support LS997 v20a

umerkhalid1992 · 12-26-2018, 19:34

hi team plz help me i got g6 h870 i try to reset frp via download mode and now phone is not coming on plzzz help

12-14-2018, 06:17	#16 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,907 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,420	Post full Software log, not reduced. What firmware version was in your device at the beginning exactly?

12-14-2018, 09:08	#18 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,907 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,420	Currently we don't have firmwares for SP200. If You also can't find firmware, You can repair device via eMMC.

12-14-2018, 14:40	#20 (permalink)
Atifs6e Freak Poster Join Date: Dec 2016 Posts: 383 Member: 2659114 Status: Offline Thanks Meter: 475	good costum paration waiting for long time this

12-14-2018, 19:24	#22 (permalink)
androidone Junior Member Join Date: Feb 2016 Posts: 3 Member: 2525557 Status: Offline Thanks Meter: 0	so, what's the solution for ls777

12-16-2018, 00:26	#25 (permalink)
Anatonimico Junior Member Join Date: Jan 2018 Location: mexico Posts: 33 Member: 2796001 Status: Offline Thanks Meter: 4	please add UNLOCK for lg ls777 software version zvf

12-19-2018, 02:58	#26 (permalink)
Datchou 0r Junior Member Join Date: Jun 2018 Posts: 25 Member: 2845028 Status: Offline Thanks Meter: 3	add lm-x410asr pleaes

12-22-2018, 08:38	#29 (permalink)
nguyenthaiau Freak Poster Join Date: Mar 2014 Posts: 172 Member: 2147680 Status: Offline Thanks Meter: 32	please support LS997 v20a

12-26-2018, 19:34	#30 (permalink)
umerkhalid1992 Freak Poster Join Date: Mar 2017 Location: south africa Posts: 360 Member: 2696842 Status: Offline Sonork: 100.1683002 Thanks Meter: 296	hi team plz help me i got g6 h870 i try to reset frp via download mode and now phone is not coming on plzzz help