Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 348 - GSM-Forum

waseem pirmahal · 02-21-2017, 11:29

Successfully Flashed samsung i8262 and repair orignal imei

t3zeu · 02-21-2017, 12:17

Flash files count is :16
Action : Firmware update.
Selected Model: Alcatel: OT-4013D
Exe version: NCKDongle AndroidMTK 2.5.7.4
Scenario: [1]Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x463558354342
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 15010046355835 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM32)
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x1900000 - LEN: 0xa00000
FORMAT EMMC FLASH : BEGIN: 0x2300000 - LEN: 0xa00000
FORMAT EMMC FLASH : BEGIN: 0x61b80000 - LEN: 0xc800000
FORMAT EMMC FLASH : BEGIN: 0x6e380000 - LEN: 0x77500000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.

t3zeu · 02-21-2017, 12:34

Flash files count is :16
Action : Firmware update.
Selected Model: Alcatel: OT-4032X
Exe version: NCKDongle AndroidMTK 2.5.7.1
Scenario: [1]Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004E35585A : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
High speed disabled by user, continue with this settings.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x1900000 - LEN: 0xa00000
FORMAT EMMC FLASH : BEGIN: 0x2300000 - LEN: 0xa00000
FORMAT EMMC FLASH : BEGIN: 0x54480000 - LEN: 0x9200000
FORMAT EMMC FLASH : BEGIN: 0x5d680000 - LEN: 0x88200000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.

luarken · 02-21-2017, 13:09

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.7.7
Selected model: OT-7040A
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB VCOM (Android) (COM3)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : PreLoader USB VCOM (Android) (COM5)
OTP IMEI: 014278004855686
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:6) Code : 3269113009
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.

luarken · 02-21-2017, 13:20

(ADB)Model Selected : SM-G360P
Detecting phone, wait....
LCD must be on.
If phone ask for SU, please allow.
If phone ask for auth please confirm.
MODEL : SM-G360T1
BOARD ID : MSM8916
PLATFORM ID : msm8916
OS VERSION : 5.1.1
BUILD ID : LMY47X
BUILD DATE : ThuJul30223053KST2015
BUILD VERSION : LMY47X.G360T1UVU1AOFA
SOFTWARE VERSION : G360T1UVU1AOFA

(GSM)RIL VERSION : SamsungRILv3.0
(GSM)BASEBAND : G360T1UVU1AOFA
(RIL)SERIAL NUMBER : R58H34F7NQX
(RIL)SW VERSION : G360T1UVU1AOFA
Unlocking please Wait.
Unlock Done, Restarting Phone!
Total Time: 00:00:19

ibrajinja · 02-21-2017, 14:28

Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM14)
BaseBand CPU : MT6276
SW_VER : V322_01A_CFZZ_QVGA_WGD_YC8_V06
HW_VER : V322_01A
Meta mode conected ok, start reading phone....
Phone imei[1] : 359767057998206
Phone imei[2] : 359767057998214
UNLOCK SIM[1]:
Unlock ok sim[1]
UNLOCK SIM[2]:
Unlock ok sim[2]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
SIMLOCK INFO[2]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

ibrajinja · 02-21-2017, 14:35

EXE: NckBox Spreadtrum Module 0.4
SELECTED : SC6531
ACTION: Unlock.
SCENARIO: SC6531.
Start Detect phone.
Remove the battery and connect handset to PC via USB cable.
After long press boot key while inserting the battery.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM73)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6531
FlashId: WINBOND: [0x800000]W25Q64FW
Reading Flash Info, wait...
Flash Size: $800000 Sector Size: $8000
NVRAM Status: NV_MINVALID_SOK
Checking nvram, wait....
Using mode 2
Writing simlock, wait...
Write Done.
Backup saved: backup\spd_nvram_backup\SC6531_355942075814925_sav ed_nv_1.bin
Total Time: 00:00:31
Done.

4G Telecom · 02-21-2017, 14:52

Spice Android One (Mi498) android v. 6.0.1

Read flash (Flash tool Formate ) Done

Code:

 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM51)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6582_S01
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (29Gb+8192Mb) HYNIX 0x483447316404 
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A48344731 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM66)
 [0]Warning, nvram posible damaged!!.
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start procesing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start procesing nvram
 Start procesing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start procesing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start procesing bootloader ......
 Reading:  BEGIN: 0x1cc0000        - LEN: 0x60000         
 Partition: boot seems damaged, skip saving..
 Partition: recovery seems damaged, skip saving..
 Start procesing secro
 Start procesing logo ......
 Error get partition info.
 Start procesing oem ......
 Reading:  BEGIN: 0x3fa0000        - LEN: 0x4000000       
 Start procesing system
 Reading:  BEGIN: 0x9000000        - LEN: 0x3e800000      
 Backup cache disabled, we will skip it....
 Backup userdata disabled, we will skip it....
 Start procesing gen ......
 Reading:  BEGIN: 0xe5000000       - LEN: 0x3f80000       
 Saved to : Q:\Android_MTK\firmware_backup\MT6582_S01_EMMC_02_21_2017_19_10_00
 Wait untill phone will start charging.
 All done.

danisajee · 02-21-2017, 15:40

Code:

 Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.7.7
 Selected model: MT6571_EMMC
 Action: Unlock
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM42)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6580_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (57Gb+4096Mb) KSI 0x454838454134 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 70010045483845 : 000000000000000000
 EMMC UA SIZE: 0x1c8000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1c8c00000      [7.137 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM84)
 IMEI[1]: 358235077615037
 IMEI[2]: 358235077809937
 Reading security, wait...
 SIM[1]: 
 Block1(N): Locked (remain:5) Code : 87654321 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]: 
 Block1(N): Locked (remain:5) Code : 87654321 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Unlocking target...please wait.
 Unlock finished.
 Wait untill phone will start charging.
 All done.

fun · 02-21-2017, 19:26

The job done in 3 seconds.

post img
Thank you

nicnec · 02-21-2017, 21:32

Allview X2 Soul IMEI to repair

Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.5.7.4
Selected phone: Allview X2 Soul
Action : IMEI REPAIR.
IMEI[1] for write : 352713064386321
IMEI[2] for write : 352713064386321
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6592
Phone must be off with battery inside.
Please insert USB cable now...
[32]Detected: MediaTek PreLoader USB VCOM (Android) (COM32)
\\?\usb#vid_0e8d&pid_2000#6&34b836a7&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[41]META Port Detected: MediaTek USB VCOM (Android) (COM41)
USB\VID_0E8D&PID_2007\6&34B836A7&0&5
Start sync target, waiting responce.....
[AP]BaseBand CPU : MT6592,S01
[AP]APP_VER: CBW5702VF_0401_T9041
[META]BaseBand CPU : MT6592, E00
[META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V34.P13
[META]HW_VER : GIONEE92_CWET_KK_HSPA_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 352713064386321
Phone imei[1] : 352713064386321
IMEI to repair: [2] 352713064386321
Phone imei[2] : 352713064386321
Clean Boot flag ok.

nicnec · 02-21-2017, 21:41

Allview A5 Easy Erasing FRP OK!

Exe version: NCKDongle AndroidMTK 2.5.7.4
Selected model: Allview A5 Easy
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM32)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.

luzer · 02-22-2017, 02:10

Haier HaierPhone L54

Quote:

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.5
Selected model: MT6735M
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM178)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) KSI 0x454838434538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 70010045483843 : 000000000000000000
EMMC UA SIZE: 0x1c8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c8c00000 [7.137 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM172)
IMEI[1]: 86205403-------
IMEI[2]: 86205403-------
Reading security, wait...
Block1(N): Locked (remain:5) Code : 20160701
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Block1(N): Locked (remain:5) Code : 20160701
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Wait untill phone will start charging.

Huawei Y3-II (LUA-L03)

Quote:

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.7.5
Selected model: Ascend Y3 II[LUA-L02]
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[178]Detected: PreLoader USB VCOM Port (COM178)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[216]META Port Detected: Gadget CDC VCOM Driver (COM216)
USB\VID_0E8D&PID_2007\5&34B1332A&0&3
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6735m,S01
[AP]APP_VER: ALPS.L1.MP3.V2.95_OT6735M.35GU.LU.L1_P12
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V48.P10
[META]HW_VER : OT6735_65C_LU_L1_HW
Phone imei[1] : 86953102-------
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.

Huawei E5330 (Mobile Wifi)

Quote:

Exe Version: NCKdongle v18.4
IMEI checksum seems ok
Brand: HUAWEI MODEMS
Model: E5330
IMEI: 86454202-------

Algo v1 Code: 56988762
Algo v2 Code: 50331135
Algo v3 Code: 47647506
--------------------------

4G Telecom · 02-22-2017, 08:03

Gionee P2S Flashing Done

Flash files count is :13
Action : Firmware update.
Selected Model: 0-By CPU: MT6572_EMMC
Exe version: NCKBox AndroidMTK 1.8.7.7
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM51)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004E35585A : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM66)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.

wsmobile · 02-22-2017, 08:26

OT-2045X done.

USB Connection selected.
EXE VERSION: NCKDongle MTK Tool 1.49
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM10
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM10)
BaseBand CPU : MT6276
SW_VER : 2045X_L2EN_V1.5_160712_CAM30_MCP128_64_FM_BT_AU_OP TUS
HW_VER : HW01
Meta mode conected ok, start reading phone....
Phone imei[1] : 351530081576820
Phone imei[2] : 351530081576820
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

02-21-2017, 13:09	#5209 (permalink)
luarken Junior Member Join Date: Jun 2014 Posts: 14 Member: 2198181 Status: Offline Thanks Meter: 2	Ot-7040a Selected connection metod: FLASH Mode Exe version: NCKBox AndroidMTK 1.8.7.7 Selected model: OT-7040A Action: Unlock Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB VCOM (Android) (COM3) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6582_S01 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930 EMMC FW VERSION: 10:00:00:00:00:00:00:00 EMMC CID: 11010030303447 : 000000000000000000 EMMC UA SIZE: 0xec000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xec480000 [3.692 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : PreLoader USB VCOM (Android) (COM5) OTP IMEI: 014278004855686 Reading security, wait... SIM[1]: Block1(N): Locked (remain:6) Code : 3269113009 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked Unlocking target...please wait. Unlock finished. Wait untill phone will start charging.

02-21-2017, 13:20	#5210 (permalink)
luarken Junior Member Join Date: Jun 2014 Posts: 14 Member: 2198181 Status: Offline Thanks Meter: 2	Sm-g360p (ADB)Model Selected : SM-G360P Detecting phone, wait.... LCD must be on. If phone ask for SU, please allow. If phone ask for auth please confirm. MODEL : SM-G360T1 BOARD ID : MSM8916 PLATFORM ID : msm8916 OS VERSION : 5.1.1 BUILD ID : LMY47X BUILD DATE : ThuJul30223053KST2015 BUILD VERSION : LMY47X.G360T1UVU1AOFA SOFTWARE VERSION : G360T1UVU1AOFA (GSM)RIL VERSION : SamsungRILv3.0 (GSM)BASEBAND : G360T1UVU1AOFA (RIL)SERIAL NUMBER : R58H34F7NQX (RIL)SW VERSION : G360T1UVU1AOFA Unlocking please Wait. Unlock Done, Restarting Phone! Total Time: 00:00:19

02-21-2017, 14:28	#5211 (permalink)
ibrajinja No Life Poster Join Date: Aug 2007 Location: Africa.uganda Posts: 2,121 Member: 562975 Status: Offline Sonork: better tomorow Thanks Meter: 247	mtn buzz unlocked Phone detected...Please wait Conected ok with target ... Reopen comport(COM14) BaseBand CPU : MT6276 SW_VER : V322_01A_CFZZ_QVGA_WGD_YC8_V06 HW_VER : V322_01A Meta mode conected ok, start reading phone.... Phone imei[1] : 359767057998206 Phone imei[2] : 359767057998214 UNLOCK SIM[1]: Unlock ok sim[1] UNLOCK SIM[2]: Unlock ok sim[2] SIMLOCK INFO[1]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked SIMLOCK INFO[2]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done.

02-21-2017, 19:26	#5215 (permalink)
fun No Life Poster Join Date: Feb 2005 Location: Ireland Posts: 1,396 Member: 117145 Status: Offline Sonork: 1617520 Thanks Meter: 382	Huawei y5 II CUN-L01 FRP The job done in 3 seconds. post img Thank you

02-21-2017, 12:17	#5207 (permalink)
t3zeu Major Poster Join Date: Jul 2014 Location: Romania Posts: 48 Member: 2216077 Status: Offline Thanks Meter: 5	Flash files count is :16 Action : Firmware update. Selected Model: Alcatel: OT-4013D Exe version: NCKDongle AndroidMTK 2.5.7.4 Scenario: [1]Full Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM3) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) SAMSUNG 0x463558354342 EMMC FW VERSION: 01:00:00:00:00:00:00:00 EMMC CID: 15010046355835 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9880000 [3.649 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM (Android) (COM32) Flash EMMC Algo Start. Preloader saved in firmware directory. Starting flash. FORMAT EMMC FLASH : BEGIN: 0x1900000 - LEN: 0xa00000 FORMAT EMMC FLASH : BEGIN: 0x2300000 - LEN: 0xa00000 FORMAT EMMC FLASH : BEGIN: 0x61b80000 - LEN: 0xc800000 FORMAT EMMC FLASH : BEGIN: 0x6e380000 - LEN: 0x77500000 Send preloader... Download firmware to flash now... Wait untill phone will start charging.

02-21-2017, 12:34	#5208 (permalink)
t3zeu Major Poster Join Date: Jul 2014 Location: Romania Posts: 48 Member: 2216077 Status: Offline Thanks Meter: 5	Flash files count is :16 Action : Firmware update. Selected Model: Alcatel: OT-4032X Exe version: NCKDongle AndroidMTK 2.5.7.1 Scenario: [1]Full Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM (Android) (COM3) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42 EMMC FW VERSION: 01:00:00:00:00:00:00:00 EMMC CID: 1501004E35585A : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9880000 [3.649 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED High speed disabled by user, continue with this settings. Flash EMMC Algo Start. Preloader backup already exist, skip saving. Starting flash. FORMAT EMMC FLASH : BEGIN: 0x1900000 - LEN: 0xa00000 FORMAT EMMC FLASH : BEGIN: 0x2300000 - LEN: 0xa00000 FORMAT EMMC FLASH : BEGIN: 0x54480000 - LEN: 0x9200000 FORMAT EMMC FLASH : BEGIN: 0x5d680000 - LEN: 0x88200000 Send preloader... Download firmware to flash now... Wait untill phone will start charging.

02-21-2017, 14:35	#5212 (permalink)
ibrajinja No Life Poster Join Date: Aug 2007 Location: Africa.uganda Posts: 2,121 Member: 562975 Status: Offline Sonork: better tomorow Thanks Meter: 247	EXE: NckBox Spreadtrum Module 0.4 SELECTED : SC6531 ACTION: Unlock. SCENARIO: SC6531. Start Detect phone. Remove the battery and connect handset to PC via USB cable. After long press boot key while inserting the battery. Keep key untill boot complete. Detected: SPRD U2S Diag (COM73) Sending loader, keep boot key untill loader start. Loader OK: nckTeam(2016) Beta 0.3 CPU: 6531 FlashId: WINBOND: [0x800000]W25Q64FW Reading Flash Info, wait... Flash Size: $800000 Sector Size: $8000 NVRAM Status: NV_MINVALID_SOK Checking nvram, wait.... Using mode 2 Writing simlock, wait... Write Done. Backup saved: backup\spd_nvram_backup\SC6531_355942075814925_sav ed_nv_1.bin Total Time: 00:00:31 Done.

02-21-2017, 21:32	#5216 (permalink)
nicnec Freak Poster Join Date: Jan 2004 Location: Romania Age: 56 Posts: 460 Member: 50585 Status: Offline Thanks Meter: 63	Allview X2 Soul IMEI to repair Selected connection metod: Meta Connection Exe version: NCKDongle AndroidMTK 2.5.7.4 Selected phone: Allview X2 Soul Action : IMEI REPAIR. IMEI[1] for write : 352713064386321 IMEI[2] for write : 352713064386321 Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6592 Phone must be off with battery inside. Please insert USB cable now... [32]Detected: MediaTek PreLoader USB VCOM (Android) (COM32) \\?\usb#vid_0e8d&pid_2000#6&34b836a7&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [41]META Port Detected: MediaTek USB VCOM (Android) (COM41) USB\VID_0E8D&PID_2007\6&34B836A7&0&5 Start sync target, waiting responce..... [AP]BaseBand CPU : MT6592,S01 [AP]APP_VER: CBW5702VF_0401_T9041 [META]BaseBand CPU : MT6592, E00 [META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V34.P13 [META]HW_VER : GIONEE92_CWET_KK_HSPA_HW Meta mode conected ok, start reading phone.... IMEI to repair: [1] 352713064386321 Phone imei[1] : 352713064386321 IMEI to repair: [2] 352713064386321 Phone imei[2] : 352713064386321 Clean Boot flag ok.

02-21-2017, 21:41	#5217 (permalink)
nicnec Freak Poster Join Date: Jan 2004 Location: Romania Age: 56 Posts: 460 Member: 50585 Status: Offline Thanks Meter: 63	Allview A5 Easy Erasing FRP OK! Exe version: NCKDongle AndroidMTK 2.5.7.4 Selected model: Allview A5 Easy Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM32) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 EMMC FW VERSION: 07:00:00:00:00:00:00:00 EMMC CID: 90014A48384731 : 000000000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2c00000 [7.293 GB] Preloader SEC version: 2 Checking data, wait... Erasing FRP, wait... FRP Reset Done. Wait untill phone will start charging.

02-22-2017, 08:03	#5219 (permalink)
4G Telecom No Life Poster Join Date: Jul 2015 Location: India Posts: 597 Member: 2421242 Status: Offline Sonork: 100.1614558 Thanks Meter: 700	Gionee P2S Flashing Done Flash files count is :13 Action : Firmware update. Selected Model: 0-By CPU: MT6572_EMMC Exe version: NCKBox AndroidMTK 1.8.7.7 Scenario: [0]Safe Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM51) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42 EMMC FW VERSION: 01:00:00:00:00:00:00:00 EMMC CID: 1501004E35585A : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9880000 [3.649 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM (Android) (COM66) Warning, flashing preloader disabled! If you change android version, preloader must be flashed. Flash EMMC Algo Start. Preloader saved in firmware directory. Starting flash. Download firmware to flash now... Wait untill phone will start charging. All done.

02-22-2017, 08:26	#5220 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	OT-2045X done. USB Connection selected. EXE VERSION: NCKDongle MTK Tool 1.49 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM10 Phone detected...Please wait Conected ok with target ... Reopen comport(COM10) BaseBand CPU : MT6276 SW_VER : 2045X_L2EN_V1.5_160712_CAM30_MCP128_64_FM_BT_AU_OP TUS HW_VER : HW01 Meta mode conected ok, start reading phone.... Phone imei[1] : 351530081576820 Phone imei[2] : 351530081576820 UNLOCK SIM[1]: Unlock ok sim[1] SIMLOCK INFO[1]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done.