Post here successfully operations via NCK BOX / Dongle PREMIUM v2

[Braycel]

 Flash files count is :16
 Action : Firmware update.
 Selected Model: Alcatel: OT-7041D
 Exe version: NCKDongle AndroidMTK 2.5.7.4
 Scenario: [1]Full Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM (Android) (COM26)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6582_S01
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 11010030303447 : 000000000000000000
 EMMC UA SIZE: 0xec000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 High speed disabled by user, continue with this settings.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 FORMAT EMMC FLASH :  BEGIN: 0x1900000        - LEN: 0xa00000        
 FORMAT EMMC FLASH :  BEGIN: 0x2300000        - LEN: 0xa00000        
 FORMAT EMMC FLASH :  BEGIN: 0x51f80000       - LEN: 0x13900000      
 FORMAT EMMC FLASH :  BEGIN: 0x65880000       - LEN: 0x82c00000      
 Send preloader...
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

[bright hlatini]

HUAWEI Y3II_LUA-U22 FRP UNLOCK DONE


Exe version: NCKBox AndroidMTK 1.8.7.7
Selected model: Ascend Y3 II[LUA-U22]
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM45)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

[spd3]

Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.5.7.4
Selected phone: MT6735M
Action : IMEI REPAIR.
IMEI[1] for write : xxxxxxxxxxxxxxxx
IMEI[2] for write : xxxxx503821xxxx
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6735M
Phone must be off with battery inside.
Please insert USB cable now...
[119]Detected: MediaTek PreLoader USB VCOM (Android) (COM119)
\\?\usb#vid_0e8d&pid_2000#fercfqlrscgmzds4#{a5dcbf 10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[5]META Port Detected: MediaTek USB VCOM (Android) (COM5)
USB\VID_0E8D&PID_2007\6&29A21A1A&1&4
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6582,S01
[AP]APP_VER: ALPS.L1.MP12.V1.2_WT6582.WE.SH.L1_P37
[META]BaseBand CPU : MT6582, E01
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V32.P10
[META]HW_VER : WT6582_WE_SH_L1_HSPA_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 355475038221322
Phone imei[1] : 355475038226666
IMEI to repair: [2] 356475038211256
Phone imei[2] : 355475038216666
Clean Boot flag ok.
All done.

[spd3]

Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.5.7.4
Selected phone: MT6735M
Action : IMEI REPAIR.
IMEI[1] for write : xxxxxxxxxxxxxxxx
IMEI[2] for write : xxxxx503821xxxx
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6735M
Phone must be off with battery inside.
Please insert USB cable now...
[119]Detected: MediaTek PreLoader USB VCOM (Android) (COM119)
\\?\usb#vid_0e8d&pid_2000#fercfqlrscgmzds4#{a5dcbf 10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[5]META Port Detected: MediaTek USB VCOM (Android) (COM5)
USB\VID_0E8D&PID_2007\6&29A21A1A&1&4
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6582,S01
[AP]APP_VER: ALPS.L1.MP12.V1.2_WT6582.WE.SH.L1_P37
[META]BaseBand CPU : MT6582, E01
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V32.P10
[META]HW_VER : WT6582_WE_SH_L1_HSPA_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 355475038221322
Phone imei[1] : 355475038226666
IMEI to repair: [2] 356475038211256
Phone imei[2] : 355475038216666
Clean Boot flag ok.
All done.

[zamkallytel]

AHSANTENI ;GOOD JOB,GOOOD TEAM[IMG]mk_zpsgymhjhyt.png[/IMG][/URL][/IMG]

[wsmobile]

Mobiwier pictor done.

USB Connection selected.
EXE VERSION: NCKDongle MTK Tool 1.49
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM75
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI[1]: 357717061405732
IMEI[2]: 357717061405732
Start read, wait....
Block1[N]: Locked (remain:5) Code : 12345678
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
Unlock file done
Unlock file done
Processing done.
Unlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.
All done.

[zvrrr]

Flash files count is :16
Action : Firmware update.
Selected Model: Alcatel: OT-6037Y
Exe version: NCKDongle AndroidMTK 2.5.7.4
Scenario: [1]Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM314)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x4b3758564d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004B375856 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM315)
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x1900000 - LEN: 0xa00000
FORMAT EMMC FLASH : BEGIN: 0x2300000 - LEN: 0xa00000
FORMAT EMMC FLASH : BEGIN: 0x55380000 - LEN: 0xc800000
FORMAT EMMC FLASH : BEGIN: 0x61b80000 - LEN: 0x16cd00000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.

[wsmobile]

OT-5022X done.

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.5
Selected model: OT-5022X
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM56)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39 : 000000000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM85)
OTP IMEI: 352934071773166
MODEL FROM PROINFO: 5022X-2ATWGB1-1
SECRO FROM PROINFO: LMP16X1YGBTW
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:3) Code : 1479843380588521
Block2(NS): Unlocked
Block3(SP): Locked (remain:1) Code : 0724445094571284
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

[4mula]

GT-I8190 Privacy reset
Exe version: NCKBox AndroidMTK 1.8.7.6
Selected model: MT6571_EMMC
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM85)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6571_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [TOSHIBA] TYBC0A111557KC
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 128 BMT Blocks 80
Preloader SEC version: 2
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000
[2]Part: NVRAM Begin: 0x200000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000
[4]Part: SECCFG Begin: 0x800000 Len: 0x40000
[5]Part: UBOOT Begin: 0x840000 Len: 0x80000
[6]Part: BOOTIMG Begin: 0x8c0000 Len: 0x600000
[7]Part: RECOVERY Begin: 0xec0000 Len: 0x600000
[8]Part: SEC_RO Begin: 0x14c0000 Len: 0x40000
[9]Part: MISC Begin: 0x1500000 Len: 0xc0000
[10]Part: LOGO Begin: 0x15c0000 Len: 0x100000
[11]Part: EXPDB Begin: 0x16c0000 Len: 0x200000
[12]Part: FAT Begin: 0x18c0000 Len: 0x1400000
[13]Part: ANDROID Begin: 0x2cc0000 Len: 0xf800000
[14]Part: CACHE Begin: 0x124c0000 Len: 0x180000
[15]Part: USRDATA Begin: 0x12640000 Len: 0xcb40000
[16]Part: BMTPOOL Begin: 0xffff0038 Len: 0x0
Offset: 0x1efc0000 Count: 17
Dumping data, wait.
Value found, procesing[010c][001c0000]
Resetting phone.
FORMAT NAND FLASH : BEGIN: 0x12640000 - LEN: 0xcb40000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
All done.

[gunit1]

Infinix Note 2 reset privacy code done one clic !

 Exe version: NCKDongle AndroidMTK 2.5.7.5
 Selected model: MT6753
 Action: Reset Privacy
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6753_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x463832324d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010046383232 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Preloader SEC version: 2
 Dumping data, wait.
 Value found, procesing[010c][00460000]
 Resetting phone.
 FORMAT EMMC FLASH :  BEGIN: 0x6b00000        - LEN: 0x2000000       
 All done.

[gunit1]

ZTE KIS MAX 2(orange ) unlock done !

 Selected connection metod: META Mode
 Exe version: NCKDongle AndroidMTK 2.5.7.5
 Selected model: MT6572_EMMC
 Action: Unlock
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [7]Detected: MediaTek PreLoader USB VCOM (Android) (COM7) 
 \\?\usb#vid_0e8d&pid_2000#6&61bf49f&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [87]META Port Detected: MediaTek USB VCOM (Android) (COM87) 
 USB\VID_0E8D&PID_2007\6&61BF49F&0&1 
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : MT6572,S01
 [AP]APP_VER: ORA_CI_QB18S_P172R10V1.0.0B01
 [META]BaseBand CPU : MT6572, E01
 [META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P29
 [META]HW_VER : ZZTENJ72_WE_72_KK_HSPA_HW
 Phone imei[1] : 867134027280071
 Start direct unlock[SIM1]
 Direct unlock done
 All done

[bright hlatini]

ALCATEL 4010X DIRECT UNLOCK DONE

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.6
Selected model: MT6575_NAND
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6575
Phone must be off with battery inside.
Please insert USB cable now...
[14]Detected: PreLoader USB VCOM Port (COM14)
\\?\usb#vid_0e8d&pid_2000#5&299bbfcc&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[37]META Port Detected: MediaTek USB VCOM (Android) (COM37)
USB\VID_0E8D&PID_2007\5&299BBFCC&0&1
Start sync target, waiting responce.....
[AP]BaseBand CPU : MT6575,S01
[AP]APP_VER: ALPS.GB2.MP.V2.24
[META]BaseBand CPU : MT6575
[META]SW_VER : MAUI.11AMD.W11.50.SP.V31.F2.P12
[META]HW_VER : JRDHZZ75_GB2_HW
Phone imei[1] : 869294015398869
Start direct unlock[SIM1]
Direct unlock done
All done.

[waseem pirmahal]

Successfully Flashed samsuns i9060 with nck dongle
hang on logo done

[gunit1]

infinix X510 opération Fail

Exe version: NCKDongle AndroidMTK 2.5.7.5
Selected model: MT6580
Action: Read Pattern
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
Boot mode: Preloader
BBCHIP
Please restart exe, if error persist check if exe opened in ADMIN MODE.
Boot Fail.!!!.
All done.

[gunit1]

infinix X510 opération solved i was change usb port

 Exe version: NCKDongle AndroidMTK 2.5.7.5
 Selected model: MT6580
 Action: Read Pattern
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
 Boot mode: Preloader
 BBCHIP 
 Please restart exe, if error persist check if exe opened in ADMIN MODE.
 Boot Fail.!!!.
 All done.
 Action : Format UserData.
 Selected 0-By CPU:MT6580
 Exe version: NCKDongle AndroidMTK 2.5.7.5
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
 Boot mode: Preloader
 BBCHIP 
 Please restart exe, if error persist check if exe opened in ADMIN MODE.
 Boot Fail.!!!.
 All done.
 Action : Format UserData.
 Selected 0-By CPU:MT6580
 Exe version: NCKDongle AndroidMTK 2.5.7.5
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
 Boot mode: Preloader
 BBCHIP 
 Please restart exe, if error persist check if exe opened in ADMIN MODE.
 Boot Fail.!!!.
 All done.
 Action : Format UserData.
 Selected 0-By CPU:MT6580
 Exe version: NCKDongle AndroidMTK 2.5.7.5
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM55)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6580_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x513832534d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010051383253 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Detecting format adress....wait!
 
 Starting generic userdata format...!
 FORMAT EMMC FLASH :  BEGIN: 0x90000000       - LEN: 0x10000000      
 FORMAT EMMC FLASH :  BEGIN: 0xa0000000       - LEN: 0x302d80000     
 All done.

 Exe version: NCKDongle AndroidMTK 2.5.7.5
 Selected model: MT6580
 Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM55)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6580_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x513832534d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010051383253 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Preloader SEC version: 2
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.