Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 453 - GSM-Forum

aymandh4 · 10-17-2018, 12:06

Rest frp asus_x00ad done

https://f.top4top.net/p_102077ooq1.png

bright hlatini · 10-18-2018, 15:39

ITEL IT14085 5.1 READ INFO DONE

EXE: NckBox Spreadtrum Module 0.5
SELECTED: SC7731G_EMMC 5.x
ACTION: BootInfo
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM7)
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
Reconnecting phone...
Detected: SCI USB2Serial (COM7)
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: Itel
Hardware: SP7731GEA_V1.0.0
Platform: sc8830
Board: sp7731gea_it1408
Build Id: LMY47D
Model: itel it1408
Android Release: 5.1
Android Version: IT1408-W404-20180119-PA
IMEI 1: 35XXXXXXXXXXXX
IMEI 2: 35XXXXXXXXXXXX
[CUST]Simlock Status: UNLOCKED
[USER]Simlock Status: UNLOCKED
Simlock Type: 0
Total Time: 00:00:09
Done.

technomak · 10-20-2018, 11:48

Code:

Exe version: NCKDongle AndroidMTK 2.5.9.3
 Selected model: AF51
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM14)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) UNKNOWN_EMMC_DEVICE 
 EMMC FW VERSION: 12:00:00:00:00:00:00:00
 EMMC CID: 8801034E4361726420 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

fokal2008 · 10-20-2018, 13:49

OT9002X CODE CALCULED DONE

DUSKnenixs · 10-21-2018, 01:41

Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM10)
Boot mode: Preloader
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) TOSIBA 0x303038473730
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 110100303038473730 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

technomak · 10-21-2018, 15:57

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.3
 Selected model: K10A40
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM29)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A393652 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

technomak · 10-21-2018, 16:47

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.3
 Selected model: ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM29)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42 
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463732324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

luzer · 10-23-2018, 03:55

Huawei Y5 2017 .....

Quote:

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: Ascend Y6 PRO [MYA-L03]
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
IMEI[1]: 862650039324321
IMEI[2]: 862650039324321
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:8) Code : 8493274994153391
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:255) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[SIM_EX_1]Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
[2]Unlock finished.
[3]Unlock finished.
Wait untill phone will start charging.
All done.

---------

Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: Ascend Y6 PRO [MYA-L03]
[erase]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FORMAT EMMC FLASH : BEGIN: 0x18200000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.

luzer · 10-23-2018, 03:55

Huawei Y5 2017 .....

Quote:

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: Ascend Y6 PRO [MYA-L03]
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
IMEI[1]: 862650039324321
IMEI[2]: 862650039324321
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:8) Code : 8493274994153391
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:255) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[SIM_EX_1]Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
[2]Unlock finished.
[3]Unlock finished.
Wait untill phone will start charging.
All done.

---------

Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: Ascend Y6 PRO [MYA-L03]
[erase]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FORMAT EMMC FLASH : BEGIN: 0x18200000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.

DUSKnenixs · 10-23-2018, 15:03

Operation: Unlock phone.
Searching for phone.....
Port: Android HS-USB Diagnostics AF07 (COM36)
Rebooting in download mode, wait...
Waiting for download mode...
Port: Android HS-USB QDLoader 9008
Hello received.
HW ID: 00000000E1009600 MSM8909
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998 421ADAD42A380F
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 7.28 GB Partitions count: 40
Userdata Size: 4.53 GB
Manufacturer: TCL
Cpu: armeabi-v7a
Build Id: LMY47V
Model: 5054X
Android Release: 5.1.1
Android Version: LMY47V release-keys
Security patch: 2016-09-05
IMEI: 3527300xxxxxxxxxxx
Model: 5054X-2APMPT1
Secro: X8C0CP00BR10
Step 1 ok.
Writing simlock ok.
Restarting phone.....
*************************************

wsmobile · 10-24-2018, 07:46

Wiko jerry3 frp done.

Exe version: NCKDongle AndroidMTK 2.5.9.3
Selected model: Jerry 2
[erase]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM51)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FORMAT EMMC FLASH : BEGIN: 0x1b200000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.

atyhicham · 10-25-2018, 11:35

Exe version: NCKBox AndroidMTK 1.8.9.4
Selected model: ELBRUS
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM15)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e36324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464E36324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
-Reading GPT Drive OK
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

technomak · 10-25-2018, 12:59

Code:

 Action : Format UserData.
 Selected HTC:HTC 820
 Exe version: NCKDongle AndroidMTK 2.5.9.5
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM29)
 Boot mode: Preloader
 BBCHIP: 6592 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6592
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+8192Mb) HYNIX 0x484147326505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A484147326505 : 00000000000000
 EMMC UA SIZE: 0x3ab800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac400000      [14.691 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM31)
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: CACHE  begin: 0x88000000        length: 0x2c000000      
 Partition: USRDATA  begin: 0xb4000000        length: 0x2f6300000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

DUSKnenixs · 10-25-2018, 15:19

Exe version: NCKDongle AndroidMTK 2.5.9.5
Selected model: Alcatel VFD-620[MT6739]
Will be used database connection.
Scanning for presents meta ports...
Detected(4) : Dispositivo de Série USB (COM4)
ChipID: MT6739,S01
Using Algo 5.
Starting META using port[COM4], wait...
BaseBand CPU : MT6739
MODEM SW Version : MOLY.LR12A.R2.MP.V18.P16
MODEM HW Version : TK_MD_L4_HW
IMEI location: OTP
IMEI[1] : 353429090xxxxxxxx
IMEI[2] : 000000000000000
Loading database ok
[1]Reading simlock info:

Block1(N): Locked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[2]Reading simlock info:

Block1(N): Unlocked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
All done.

Exe version: NCKDongle AndroidMTK 2.5.9.5
Selected model: Alcatel VFD-620[MT6739]
Action: Unlock
Will be used database connection.
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[3]Detected: Dispositivo de Série USB (COM3)
\\?\usb#vid_0e8d&pid_0003#5&436822d&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[4]META Port Detected: Dispositivo de Série USB (COM4)
USB\VID_0E8D&PID_200E&MI_01\6&D2CF733&0&0001
ChipID: MT6739,S01
Using Algo 5.
Starting META using port[COM4], wait...
BaseBand CPU : MT6739
MODEM SW Version : MOLY.LR12A.R2.MP.V18.P16
MODEM HW Version : TK_MD_L4_HW
IMEI location: OTP
IMEI[1] : 353429090xxxxxx
IMEI[2] : 000000000000000
Loading database ok
[1]Reading simlock info:

Block1(N): Locked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[1]Unlocking target, wait

Direct Unlock Done.
[2]Reading simlock info:

Block1(N): Unlocked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[2]Unlocking target, wait

Direct Unlock Done.
All done.

anupamstk · 10-26-2018, 12:00

Nova Young Country Unlock Done

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.9.3
Selected model: Nova Young [MYA-L11]
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM52)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM119)
IMEI[1]: 862665035530903
IMEI[2]: 862665035530903
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:8) Code : 5814678212328916
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:255) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[SIM_EX_1]Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
[2]Unlock finished.
[3]Unlock finished.
Wait untill phone will start charging.
All done.

10-17-2018, 12:06	#6781 (permalink)
aymandh4 Freak Poster Join Date: Feb 2016 Location: Paris Age: 31 Posts: 210 Member: 2529545 Status: Offline Sonork: aymandh4 Thanks Meter: 68	Rest frp asus_x00ad done https://f.top4top.net/p_102077ooq1.png Last edited by Fast Unlocking; 10-17-2018 at 13:55.

10-20-2018, 13:49	#6784 (permalink)
fokal2008 No Life Poster Join Date: Jan 2009 Location: cameroon Posts: 1,773 Member: 953931 Status: Offline Sonork: 1652252 Thanks Meter: 897	alcatel ot9002x network unlock by calculed OT9002X CODE CALCULED DONE

10-21-2018, 01:41	#6785 (permalink)
DUSKnenixs No Life Poster Join Date: Jul 2001 Location: Planet earth Posts: 2,641 Member: 5169 Status: Offline Thanks Meter: 684	alcatel 8050d frp done Exe version: NCKDongle AndroidMTK 2.5.9.0 Selected model: MT6580 Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM (Android) (COM10) Boot mode: Preloader Using Algo 1. Scatter file loaded, not need emmi. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) TOSIBA 0x303038473730 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 110100303038473730 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2c00000 [7.293 GB] -Reading GPT Drive OK Checking data, wait... Erasing FRP, wait... FRP Reset Done. Wait untill phone will start charging. All done.

10-25-2018, 11:35	#6792 (permalink)
atyhicham Crazy Poster Join Date: Oct 2017 Location: Morocco Posts: 54 Member: 2767980 Status: Offline Thanks Meter: 25	Itel S12 frp Done using NCK Box log Exe version: NCKBox AndroidMTK 1.8.9.4 Selected model: ELBRUS [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM Port (COM15) Boot mode: Preloader BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) SAMSUNG 0x464e36324d42 EMMC FW VERSION: 03:00:00:00:00:00:00:00 EMMC CID: 150100464E36324D42 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2880000 [7.290 GB] -Reading GPT Drive OK Checking data, wait... Writing FRP, wait... FRP Reset Done. Wait untill phone will start charging. All done.

10-25-2018, 15:19	#6794 (permalink)
DUSKnenixs No Life Poster Join Date: Jul 2001 Location: Planet earth Posts: 2,641 Member: 5169 Status: Offline Thanks Meter: 684	vdf 620 sucessufull unlock done Exe version: NCKDongle AndroidMTK 2.5.9.5 Selected model: Alcatel VFD-620[MT6739] Will be used database connection. Scanning for presents meta ports... Detected(4) : Dispositivo de Série USB (COM4) ChipID: MT6739,S01 Using Algo 5. Starting META using port[COM4], wait... BaseBand CPU : MT6739 MODEM SW Version : MOLY.LR12A.R2.MP.V18.P16 MODEM HW Version : TK_MD_L4_HW IMEI location: OTP IMEI[1] : 353429090xxxxxxxx IMEI[2] : 000000000000000 Loading database ok [1]Reading simlock info: Block1(N): Locked Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [2]Reading simlock info: Block1(N): Unlocked Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked All done. Exe version: NCKDongle AndroidMTK 2.5.9.5 Selected model: Alcatel VFD-620[MT6739] Action: Unlock Will be used database connection. Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [3]Detected: Dispositivo de Série USB (COM3) \\?\usb#vid_0e8d&pid_0003#5&436822d&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [4]META Port Detected: Dispositivo de Série USB (COM4) USB\VID_0E8D&PID_200E&MI_01\6&D2CF733&0&0001 ChipID: MT6739,S01 Using Algo 5. Starting META using port[COM4], wait... BaseBand CPU : MT6739 MODEM SW Version : MOLY.LR12A.R2.MP.V18.P16 MODEM HW Version : TK_MD_L4_HW IMEI location: OTP IMEI[1] : 353429090xxxxxx IMEI[2] : 000000000000000 Loading database ok [1]Reading simlock info: Block1(N): Locked Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [1]Unlocking target, wait Direct Unlock Done. [2]Reading simlock info: Block1(N): Unlocked Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [2]Unlocking target, wait Direct Unlock Done. All done.

10-18-2018, 15:39	#6782 (permalink)
bright hlatini No Life Poster Join Date: Jul 2011 Location: malawi Posts: 1,121 Member: 1614640 Status: Offline Thanks Meter: 468	ITEL IT14085 5.1 READ INFO DONE EXE: NckBox Spreadtrum Module 0.5 SELECTED: SC7731G_EMMC 5.x ACTION: BootInfo Start Detect phone. Phone must be off with battery inside. Long press "VOL -" key while inserting usb cable. For some phones need to Long press "VOL -"+ "VOL +" key while inserting usb cable. Keep key untill boot complete. Detected: SCI USB2Serial (COM7) BOOT: SPRD3 Sending loader, keep boot key untill loader start. Reconnecting phone... Detected: SCI USB2Serial (COM7) Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. FileSystem: EMMC Manufacturer: Itel Hardware: SP7731GEA_V1.0.0 Platform: sc8830 Board: sp7731gea_it1408 Build Id: LMY47D Model: itel it1408 Android Release: 5.1 Android Version: IT1408-W404-20180119-PA IMEI 1: 35XXXXXXXXXXXX IMEI 2: 35XXXXXXXXXXXX [CUST]Simlock Status: UNLOCKED [USER]Simlock Status: UNLOCKED Simlock Type: 0 Total Time: 00:00:09 Done.

10-23-2018, 15:03	#6790 (permalink)
DUSKnenixs No Life Poster Join Date: Jul 2001 Location: Planet earth Posts: 2,641 Member: 5169 Status: Offline Thanks Meter: 684	Operation: Unlock phone. Searching for phone..... Port: Android HS-USB Diagnostics AF07 (COM36) Rebooting in download mode, wait... Waiting for download mode... Port: Android HS-USB QDLoader 9008 Hello received. HW ID: 00000000E1009600 MSM8909 PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998 421ADAD42A380F Arhitecture:32 bits [32]Sending loader, please wait.. Waiting for loader to start... MaxPayloadSizeFromTargetInBytes: 4096 MaxPayloadSizeToTargetInBytes: 8192 Reading partition info, wait. Volume[0] Size: 7.28 GB Partitions count: 40 Userdata Size: 4.53 GB Manufacturer: TCL Cpu: armeabi-v7a Build Id: LMY47V Model: 5054X Android Release: 5.1.1 Android Version: LMY47V release-keys Security patch: 2016-09-05 IMEI: 3527300xxxxxxxxxxx Model: 5054X-2APMPT1 Secro: X8C0CP00BR10 Step 1 ok. Writing simlock ok. Restarting phone..... *************************************

10-24-2018, 07:46	#6791 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Wiko jerry3 frp done. Exe version: NCKDongle AndroidMTK 2.5.9.3 Selected model: Jerry 2 [erase]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM Port (COM51) Boot mode: Preloader BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42 EMMC FW VERSION: 03:00:00:00:00:00:00:00 EMMC CID: 150100464536324D42 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] -Reading GPT Drive OK Checking data, wait... Erasing FRP, wait... FORMAT EMMC FLASH : BEGIN: 0x1b200000 - LEN: 0x100000 FRP Reset Done. Wait untill phone will start charging. All done.

10-26-2018, 12:00	#6795 (permalink)
anupamstk Insane Poster Join Date: Mar 2018 Location: Sitakunda Ctg bd Posts: 62 Member: 2816932 Status: Offline Thanks Meter: 49	Nova Young Country Unlock Done Selected connection metod: FLASH Mode Exe version: NCKDongle AndroidMTK 2.5.9.3 Selected model: Nova Young [MYA-L11] Action: Unlock Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM52) Boot mode: Preloader BBCHIP: 321 0 ca00 Using Algo 2. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6737T BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (117Gb+16384Mb) HYNIX 0x484147346132 EMMC FW VERSION: d4:00:00:00:00:00:00:00 EMMC CID: 90014A484147346132 : 00000000000000 EMMC UA SIZE: 0x3ab400000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3ac000000 [14.688 GB] -Reading GPT Drive OK Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM119) IMEI[1]: 862665035530903 IMEI[2]: 862665035530903 Reading security, wait... SIM[1]: Block1(N): Locked (remain:8) Code : 5814678212328916 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked SIM[2]: Block1(N): Unlocked (remain:255) Code : 12345678 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [SIM_EX_1]Unlocking target...please wait. [0]Unlock finished. [1]Unlock finished. [2]Unlock finished. [3]Unlock finished. Wait untill phone will start charging. All done.