POST ONLY HERE - Phones we need to be supported Via NCK DONGLE

[luzer]

Verykool SL4502 .....

BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (56Gb+8192Mb) KSI 0x563130303038
EMMC FW VERSION: 50:00:00:00:00:00:00:00
EMMC CID: 70010056313030 : 000000000000000000
EMMC UA SIZE: 0x1c3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c3c00000 [7.059 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM172)
Dumping security....
IMEI[1]: 35437207-------
IMEI[2]: 35437207-------
Dumping Preloader.
Dumping proinfo.
Reading: BEGIN: 0x80000 - LEN: 0x200
Dumping NVRAM.
IMEI[1] from NVRAM: 35437207-------
IMEI[2] from NVRAM: 35437207-------
Dumping protect1
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Dumping protect2
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Dumping SECCFG.
Reading: BEGIN: 0x4f80000 - LEN: 0x80000
Dumping SEC_RO.
Dumping frp.
Reading: BEGIN: 0x6a00000 - LEN: 0x200
Dumping nvdata.
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Saved to : C:\-\MT6735M_S00_EMMC_-_05_04_2016_14_42_19
Wait untill phone will start charging.
All done.

[akaygsm]

PLS I NEED UNLOCK
and FLASH READ/WRITE
for Alview L5 Lite (MT6261)
if it possible
tks

[ridabadredine]

Please ,how about new spd sc7730/31 for flash or unlock?

[zabamich]

New alcatel phones. 6039y, 5054x

Wysłane z mojego SM-G935F przy użyciu Tapatalka

[akaygsm]

Originally Posted by akaygsm

PLS I NEED UNLOCK
and FLASH READ/WRITE
for Alview L5 Lite (MT6261)
if it possible
tks

NCKDongle_Generic_MTK_1.45
SET
HUA 7220W or ZTE 255
DIRECT UNLOCK

USB Connection selected.
EXE VERSION: NCKDongle MTK Tool 1.45
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM8
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI[1]: 356497070XXXXXX
IMEI[2]: 356497070XXXXXX
Start read, wait....
Block1(N) : Unlocked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked
Reading simlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.
All done.

TKS orbita91

[beckam_laci]

Add more Alcatel code calculation and maybe Allview models by cable, +add reset privacy option for more phones.

NCK is the best for Mediatek phones !

[ULTRAF16]

Vodafone ultra 6
vodafone smart mini 7

[cobeon]

All android frp and privacy reset include moto htc lg mi etc. Htc s-on off

[Ronald_dg]

huawei and zte phone if possible thank you.

[luzer]

Huawei GR3 (TAG-L03) - MT6753T

MOLY.LR9.W144.MD.LWTG.MP.V35.P44 2016/01/26

Action : Boot Info.
Selected 0-By CPU:MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.8
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM178)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP
[SECURE BOOT]Wrong model selected or not supported.!!!
Boot Fail.!!!.
All done.

[charikaar]

Please add
Vodafone VFD300 V300
VODAFONE 2036X
ALCATEL 2045X
ALCATEL 5022X
ALCATEL 6039Y
Thanks

[orbita]

Originally Posted by charikaar

Please add
Vodafone VFD300 V300
VODAFONE 2036X
ALCATEL 2045X
ALCATEL 5022X
ALCATEL 6039Y
Thanks

All this phones except 2036x is supported already.
If you have 2036x in hands you can contact me directly.

[charikaar]

Originally Posted by orbita

All this phones except 2036x is supported already.
If you have 2036x in hands you can contact me directly.

Sorry I don't have any physical stock.
I am looking for Remote IMEI/PRD Unlocking.

thanks

[luzer]

Alcaltel Pixi 4 (OT-4017a) ...

Selected : MT6572_EMMC
Action: Security Items
Reinsert battery.
Battery must be charged.
must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM178)
detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
STYLE: EMMC
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
Dumping security....
OTP : 014590000957542
Dumping Preloader.
Dumping PRELOADER RAW.
Reading: BEGIN: 0x0 - LEN: 0x1000000
Dumping proinfo.
Reading: BEGIN: 0x1100000 - LEN: 0x200
Dumping NVRAM.
Dumping PROTECT_F
Reading: BEGIN: 0x1900000 - LEN: 0xa00000
Dumping PROTECT_S
Reading: BEGIN: 0x2300000 - LEN: 0xa00000
Dumping SECCFG.
Reading: BEGIN: 0x2d00000 - LEN: 0x20000
Dumping SEC_RO.
Dumping frp.
Reading: BEGIN: 0x4200000 - LEN: 0x200
Saved to : C:\-\Android_MTK\security_backup\MT6572_S00_EMMC_-_07_25_2016_19_15_46
Wait untill will charging.
All done.

Wrong readed ...

Battery must be charged.
must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM178)
detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
STYLE: EMMC
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
OTP : 01459000-------
MODEL FROM PROINFO: 4017A-2AAVGT1
SECRO FROM PROINFO: LBL1NQS1AZ10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) : 51741789
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please , some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct .
If direct fail,use reset package from support.
If reset package not exist in support,request help in .
Wait untill will charging.
All done.

Direct fails ...

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.6.8
Selected model: MT6572_EMMC
Action:
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
must be off with battery inside.
Please insert USB cable now...
[178]Detected: PreLoader USB VCOM Port (COM178)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[216]META Port Detected: Gadget CDC VCOM Driver (COM216)
USB\VID_0E8D&PID_2007\5&34B1332A&0&3
sync target, waiting responce.....
BaseBand CPU : mt6572,S01
APP_VER: ALPS.L1.MP6.V1_JHZZ6572.WET.L_P39
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1449.MD.WG.MP.V5.P6
HW_VER : JHZZ6572_WET_L_HSPA_HW
[1] : 01459000-------
[2] : 000000000000000
direct [SIM1]
Error read info[wr0]!!
direct [SIM2]
Error read info[wr0]!!
All done.

[luzer]

Alcatel Pixi 4 (OT-4017a, unlisted) ...

Selected : MT6572_EMMC
Action: Security Items
Reinsert battery.
Battery must be charged.
must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM178)
detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
STYLE: EMMC
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
Dumping security....
OTP : 014590000957542
Dumping Preloader.
Dumping PRELOADER RAW.
Reading: BEGIN: 0x0 - LEN: 0x1000000
Dumping proinfo.
Reading: BEGIN: 0x1100000 - LEN: 0x200
Dumping NVRAM.
Dumping PROTECT_F
Reading: BEGIN: 0x1900000 - LEN: 0xa00000
Dumping PROTECT_S
Reading: BEGIN: 0x2300000 - LEN: 0xa00000
Dumping SECCFG.
Reading: BEGIN: 0x2d00000 - LEN: 0x20000
Dumping SEC_RO.
Dumping frp.
Reading: BEGIN: 0x4200000 - LEN: 0x200
Saved to : C:\-\Android_MTK\security_backup\MT6572_S00_EMMC_-_07_25_2016_19_15_46
Wait untill will charging.
All done.

Wrong code readed ...

Battery must be charged.
must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM178)
detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
STYLE: EMMC
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
OTP : 01459000-------
MODEL FROM PROINFO: 4017A-2AAVGT1
SECRO FROM PROINFO: LBL1NQS1AZ10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) : 51741789
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please , some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct .
If direct fail,use reset package from support.
If reset package not exist in support,request help in .
Wait untill will charging.
All done.

Direct unlock failed ...

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.6.8
Selected model: MT6572_EMMC
Action:
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
must be off with battery inside.
Please insert USB cable now...
[178]Detected: PreLoader USB VCOM Port (COM178)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[216]META Port Detected: Gadget CDC VCOM Driver (COM216)
USB\VID_0E8D&PID_2007\5&34B1332A&0&3
sync target, waiting responce.....
BaseBand CPU : mt6572,S01
APP_VER: ALPS.L1.MP6.V1_JHZZ6572.WET.L_P39
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1449.MD.WG.MP.V5.P6
HW_VER : JHZZ6572_WET_L_HSPA_HW
[1] : 01459000-------
[2] : 000000000000000
direct [SIM1]
Error read info[wr0]!!
direct [SIM2]
Error read info[wr0]!!
All done.