Blackberry 8330 8703e 7103e 8130 Esn/Meid Repair
 

ESN/Meid Changing is ILEGAL cHECK your country's LAW

THIS PROCESS STICTLY CONFINED TO EDUCATIONAL PURPOSES ONLY

Blackberry 8330 8703e 7103e 8130 and many more Esn Repair process
Only by CdmaWorkshop Lisenced Version

Ref : CDMA Service Software / ESN Changer, SPC Unlocker...

What you need:

1- Blackberry Device

2- Blackberry Desktop Manager

3- CDMA Workshop 3.x.x *** This is only tested on 3.x.x. and higher ***
By older version only ESN can be repaired not pESNs

4- ESN/MEID That you want to right.

* NOTE
Make sure that the blackberry is on the lowest possible OS. If it is not you can get a "Read Error" in Workshop and you will not be able to Repair your device

* STEPS

Step 1: Open Blackberry Desktop Manage
Step 2: Verify that your Blackberry is on the lowest possible OS.
Step 3: Open CDMA Workshop.
Step 4: Connect to the Blackberry Com Port that pertains to your device. Example > If you notice you will have two ports for Blackberry. They will be called "RIM Virtual Ports" Mine are Com 2 & 3. You will always want to choose the highest one. So in my case I will choose "3"
Step 5: After you are connected click on "Read", then go to the "Security" tab and depending on your Blackberry send the "SPC" to your device.

if spc is correct " SPC is correct phone is unlocked " will be prompted

Here are the locations for the SPC code if your BB is not Verizon.

BlackBerry 8130:1060:1070
BlackBerry 8330:1060:1070
BlackBerry 8830:1060:1070
BlackBerry 8703e:100D:1012

Step 6: Go to MEID and click on "Read" then go to the drop down menu and select "Universal, Ram Method"
Then choose scan:

Blackberry Storm:

0264 : 0269 Scan and save as scan1 or something similar.

Then scan this location:

17B0 : 17FD Scan and save as scan2 or something similar.

Once the scan is done open both of them and take "scan2" and copy all the addresses and paste it right under the last address under "scan1". VERY IMPORTANT *** DO NOT LEAVE A SPACE UNDER THE LAST ADDRESS *** Go ahead an put the cursor and the end of the last number and hit delete to delete any line that maybe under. To test just hit the down key. If it doesn't go down to the next line then you're good.

* Once you have combined the scans save it. Either as scan1 or something else. Just remember what you named it and where it's at.

Now if it is not a BB Storm 1 scan with this location:

1013 : 10D7

you don't need to combine since it's just one scan. Remember none of this will work unless you are running the lowest OS for that model.

Go ahead and save the scan after it's done.

Step 7: Now put the MEID Hex that you want in the box. Example A1000005478893 Meid Hexadecimal
go back to "Universal, Ram Method' and this time choose "Load". Then find either, the combined scan BB Storm 1, or the just one scan, any other BB. Keep in mind that this does not work for the Storm 2, 9530, or the 9630.


br,

ESN address
 

8130 ESN addresses:
1013:2F38
106C:CF60
1070:F7B8
1097: D47C
1098:25CD
10A5: D2F4
10A6:4AE0
10B4:20CE
10B5:44A1


MEID (pESN) addresses:
1015:8430 - pESN
109C:7804 - pESN
109C:C9E5 - pESN
10AA:864C - MEID
10B8:CC70 - MEID
10B8:B18B - pESN
10B8:B48D - pESN
10B9:F879 - MEID
10B9:EF8B - pESN
1071:5398 - MEID
1071:4D10 - pESN
109C:77B4 - pESN
109C:C995 - pESN
10AA:85FC - MEID
10B8:C514 - MEID
10B8:C525 - MEID
10B8:AE39 - pESN
10B8:B137 - pESN
10B9:F825 - MEID
10B8:CC70 - MEID
10B8:B18B - pESN
10B8:B48D - pESN
10B9:F879 - MEID
10B9:EF8B - pESN
1071:5398 - MEID
1071:4D10 - pESN
109C:7170 - pESN
109C:C351 - pESN
10AA:707C - MEID
10AA:E864 - pESN
10B8:A98C - MEID
10B8:A99D - MEID
10B8:9BB8 - pESN
10B9:E29D - MEID
1071:5398 - MEID
1071:4D10 - pESN
1075:7668 - pESN
109C:C9E5 - pESN
10B8:CC70 - MEID
10B8:B18B - pESN
10B8: D88D - pESN
10B9:F879 - MEID
109C:C9E5 - pESN
10B8:CC70 - MEID
10B8:B18B - pESN
10B8:B48D - pESN
10B9:F879 - MEID
10B9:EF8B - pESN
1071:5398 - MEID
1071:4D10 - pESN
1071:48A4 - pESN
1072:6D4C - pESN
1072:75BC - pESN
1075:7198 - pESN
109C:7170 - pESN
109C:C351 - pESN
10AA:E864 - pESN
10B8:A0CA - pESN
10B9:E29D - pESN
10B8:9BB8 - pESN
1071:5398 - MEID
1071:4D10 - pESN
1075:74AC - pESN
1075:7668 - pESN
109C:C9E5 - pESN
10B8:CE70 - MEID
10B8:B18B - pESN
10B8:BC8D - pESN
10B9:F879 - MEID

br,

8330m
 

8330m meid addresses

MEID (pESN) addresses:
1015:8430 - pESN
1071:5398 - MEID
1071:4D10 - pESN
1071:4DE4 - pESN
1072:721C - pESN
1072:7A8C - pESN
1075:7668 - pESN
109C:7804 - pESN
109C:C9E5 - pESN
10AA:864C - MEID
10AA:FE40 - pESN
10B8:CE70 - MEID
10B8:B18A - pESN
10B8:B4A2 - pESN
10B9:F879 - MEID

br,

8703e
 

8703e ESn addresses

ESN addresses:
1005:86F4
1005:B450
1005:C864
1010:5240
1010:5314
1012:0320
1012:0B78
1014:5004
1015:76B0
101F:F084
1028:226D
1015:75D4
1012:0B78

br,

Blackberry 9530 Esn repair
 

- Downgrade firmware to 4.7.0.65
- Input the new MIED
- Scan & save 0264:0269( text file 1 )
- Scan & save 17B0:17FD( text file 2 )
- Copy and paste text file 2 to text file 1
- Hit save and write.
Note: use universal ram methol to scan and write.

br,

7103e Esn Repair
 

BB 7103e RAM scan 1000-1027 and found

ESN addresses:
1005:7934
100C:6CE8
100C:6DBC
100D:296C
100E:1DC8
100E:2620
1010:68A8
1011:8F54
101C:0928
1023:F04D

br,

8330 esn repair
 

8330 esn address from different Firmwares

ESN addresses:
1015:8430
109C:7170
109C:C351
10AA:E864
10B8:9BB8
10B8:A0CA
10B9:E29D
1071:48A4
1074: D614
1075:7198
10B8:A0CA
10B9:E29D
1015:8100
1075:1E94
109C:1E6C
109C:704D
10AA:1D74
10AA:9560
10B8:4833
10B8:4D35
10B8:55FE
10B8:560F
10B9:8633
10B9:8F21
1015:8430
1071:48A4
1075:7198
109C:7170
109C:C351
10AA:7078
10AA:E864
10B8:9B72
10B9:E29D
1015:8430
1071:48A4
1075:6FE0
1075:719C
109C:7174
109C:C355
10AA:707C
10AA:E868
10B8:9BAE
10B9:E2A1
1015:8430
1071:4D10
1075:744C
1075:7608
109C:77B4
109C:C995
10AA:85F8
10AA:FDEC
10B8:B137
10B8:E639
10B9:F825
1015:8100
1075:1E94
109C:1E6C
109C:704D
10AA:1D74
10AA:9560
10B8:47F8
10B9:8F21
1015:8100
1070:F59C
1075:1E94
109C:1E6C
109C:704D
10AA:1D74
10AA:9560
10B8:482E
10B9:8F21
1015:8430
1071:48A4
1072:6D4C
1072:75BC
1075:7198
109C:7170
109C:C351
10AA:E864
10B8:A0CA
10B9:E29D
10B8:9BB8
1071:48A4
1015:8430
109C:7174
109C:C355
10AA:707C
10AA:E868
10B8:9BAE
10B8:A97E
10B8:A98F
10B9:E2A1
1015:8100
1075:1CD8
1075:1E94
109C:1E6C
109C:704D
10AA:1D74
10AA:9560
10B8:4335
10B8:4833
10B9:8F21
1015:8430
109C:7170
109C:C351
10AA:7078
10AA:E864
10B8:9B97
10B9:E29D
1071:48A4
1071:4978


br,
AKSingh

BB OS 4.5...175 and above have memory access restrictions
since phones like 8230, 8530 and 9630 came out with that OS version already there's no known way to enable mamory reading,
and since there's no older versions hence no downgrade :mad:

Beside these there are lot of issues in Blackberry Cdma like corrupted reg id
leading to no spc access

all can be resolved :p

Some particular version of firmware not allows to access proper addresses need to be downgraded to only fixed versions ;);) etc

bla bla ......

br,

Its only for those who have CDMA-WORKSHOP 3.X or higher any info about BB Specially cdma is really important post only relevant things

NO THANKS POST
NO OTHER SPAM or Links to other forums

i will delete that otherwise i hope you people understand

Good info and needs to be sticky

Any info related to shareware software is useless to sticky.
And this whole method can be done via qxdm or unicdma tool.
Free of cost without buying any CDMA workshop.

This look advertisement of CDMA workshop selling only.

All know that akshing have no business now days accept CDMA workshop activation selling at 3x rate and saying bad words to other people at yahoo. Rolf

sir from where we will get the esn addresses for every phone thx ak singh doesnt have full knowledge abt cdma workshop because he just bought the cdmaworkshop start working sajinder from ludhiana have full knowledge abt the working of cdma softwares ak singh is also buying software from him he is a little kid against sajinder because thx.sajinder is using cdmaworkshop from three years and he also have dfs full version which the others doesnt have.i my knowledge he is the king of cdma softwares.

thx Tarun I dint knew that :D :D :D
is there anything left please write it here ;)

.........

sir can we work with the cracked version of cdma workshop also .

sanjubhai.

Answer to your question is clearly stated.. JUSt READ VERY FIRST FEW lines of the first post (highlighted in RED color here)and then USE brain ..



NR

... cracked version can't read blackberry phones

crack version is available only 2.7, which dose not support any BB phone, not even 7130e.
best is use unicdma , winhex, qpst, qxdm and windows calc. if memory is readable all bb are possible this way. not only bb all phone are possible if memory is readable.

Sir , which version of Os you used For Blackberry 8330 ESN Memory .

8330mAMEA_PBr4.5.0_rel188_PL3.4.0.25_A4.5.0.131_Sp rint

br,

Sir i m Asking for Blackberry 8330 not 8330m ???
my Set is ESn Based not MEID .

Hi
I am facing a Problam in BB 8330 (MEID Baesd) Phone version v4.5.0.66 this Phone is Issued by TATA Indicom.

I have to Changed ESN succusfully. Problam in MIN Writing by Both Method Ist is CDMA Workshop v3.6.0 & 2nd is Manual Edit in Programing by ##SPC.

When I Change MIN Manualy Then Show is "Invalid IMSI_S for TATA". & When I Write by CDMA Workshop after succusfull write then Automatic Change Default MIN in the Phone.

Sir Please suggest me how can I Solve this Problam asap.

Thanks & Regards
Rajinder Aggarwal

8330EFS_PBr4.3.0_rel199_PL3.1.0.71_A4.3.0.124_Bell ...

various versions but this will do the best

br,

various versions are available for 8330m but still its a mystry , these tata blackberry are not able to downgrade or upgrade by compatible version
we are working on it
solution will be posted soon

wipe of set completely and try to download this version if fails then wait for solution
http://rs104.rapidshare.com/#!downlo....131.exe|86010


br,

these are the 8330m version available

8330mAMEA_PBr4.5.0_rel179_PL3.4.0.21_A4.5.0.127
8330mAMEA_PBr4.5.0_rel188_PL3.4.0.25_A4.5.0.131
8330mAMEA_PBr4.5.0_rel205_PL3.4.0.30_A4.5.0.138
8330mAMEA_PBr4.5.0_rel253_PL3.4.0.41_A4.5.0.160
8330mAMEA_PBr4.5.0_rel281_PL3.4.0.51_A4.5.0.169
8330mAMEA_PBr4.5.0_rel293_PL3.4.0.55_A4.5.0.173
8330mAMEA_PBr4.5.0_rel295_PL3.4.0.55_A4.5.0.175
8330mAMEA_PBr4.5.0_rel311_PL3.4.0.59_A4.5.0.186

but need to find .77 v that will do the job
http://www.filecrop.com/3246385/index.html lets try ...
as the ram is locked in 8330m yet not possible to downgrade
First use MFI multiloader
Nuke your phone
when PIN becomes 00000000 Upload Software

br,

Normal Downgrade Prcedure:

1. Install Desktop Manager (of course..)
2. Uninstall any Previous BB OS Installs
3. Install the BB OS Version you wish to downgrade to.
   1. Download From Here for Sprint grab the 4.5.0.131
4. Delete the Vendors.xml file located in C:/Program Files/Common Files/Research in Motion/AppLoader directory
5. Start the BB Desktop Manager (always need this open when you want to work with your phone in any other program as well)
6. It will prompt to downgrade the device, if not click Application Loader and then Start on the right.
7. Let the program do its work and then you are downgraded.

It is wise to wipe/nuke your phone before you change OS Versions. This will give you a much cleaner install, just remember to back up your data first of course!
Wiping your phone with JL Commander

1. Download It: http://www.megaupload.com/?d=A8T34DIJ
2. Connect your phone
3. Run JL_Cmder.bat
4. Specify your password if any is required to access the device.
5. Select wipe by pressing 4
6. Enter the phrase it tells you
7. The phone will wipe and there will be no OS on it anymore.
8. After the phone reboots you will see an icon of what looks like a window with an X through it and under that an error 507.
9. With the phone connected to your computer, load Desktop Manager
10. It will prompt you to install the OS on the phone.

If your computer is not picking up the device after you wipe it, then try to turn it on and once it gets to the screen remove the battery with the phone still connected to the computer

thx to .idriss.us

br,

Another great tool you can use with your blackberries is called which can assist you in wiping, upgrading, and downgrading as well.

read this first -

BlackBerry Master Control Program (MCP) is a power tool for BlackBerry devices designed for basic, moderate and advanced users.

You can use BlackBerry Master Control Program (MCP) to (Basic) take screenshots (including auto-capture and auto-save), set the device time, turn the radio/on off, recover memory, gather information, view/clear event logs, display modules, gather module information, create ALX/JAD files, backup and restore third party applications, (Advanced) handheld wipe (all 3 types), factory reset, load, save and erase modules. The Operating System Management page allows you to completely manage and optimize any OS you want to install on your device. The Javaloader CLI page offers a 1:1 GUI for javaloader.exe.

MCP allows you to keep an unlimited number of OS's installed on your PC but at the time you actually install an OS to your device MCP only lets RIM's Application Loader "see" the OS you had selected inside MCP. Most OS 101 articles tell you to uninstall all other OS's from your PC before you begin the process. This is time consuming to say the least. MCP allows you to keep multiple BlackBerry OS's installed on your computer and keep them in their current (possibly optimized) state for later use at any time.

http://www.4shared.com/file/XF5eD9Dr/BlackBerry_Master_Control_Prog.html


br,
AKSingh

how to Transfer Relince Uim In HTC 6850 .

where can i get MEID or pESN from Sim for change MEID in HTC or any other MEID Based Phone .

Tell Me Something more about MEID or pESn in CDMA ..

PLZ Help ME Any body ?????????

SRY FOR MY BAD eNGLISH

Check this ..

http://forum.gsmhosting.com/vbb/f128...4/#post6507203

br,

Sir where can i get MEID or pESN from Sim ?????

Read this might help you

How to Calculate MEID DEC and P(ESN)
[INDENT]For those of you that might be affarid that the calculators will all disapear

The MEID is a string of 14 hexadecimal digits and is comprised of a 56 bit word. The first 8 bits are reserved by TIA, the next 24 bits are the manufacturer identification, and the remaining 24 bits are the unit serial number. To obtain the value of the 56 bit word, one needs to take each string of four bits and convert it to its hexadecimal equivalent. As an Example: 1010 000 100 000 000 000 000 000 000 000 010 010 010 100 101 101 111 0010 =A10000009296F2 (hexadecimal).

The left of the number must be padded with zeros to create enough decimal places to complete the decimal number. The first part will always be 10 digits, and the last part will always be 8 digits.As an example, for hexadecimal MEID=A10000009296F2:
1. Take the first 8 digits and convert them . . . .
2. A1000000 hex is equal to 2701131776 decimal.
3. Take the last 6 digits and convert them . . . .
4. 9296F2 hex is equal to 09606898 decimal (note the padding of 1 zero to the left).
5. Concatenate the first 10 decimal digits in front of the last 8 decimal digits.
6. 270113177609606898 is the 18-digit decimal MEID.

This is how to get you're MEID DEC.

Now for (P)ESN Hex
You will use a Hash Calc.
1. Take A10000009296F2 and paste into you're SHA-1 hash calculator.
2. Calculate the HASH characters in this example A10000009296F2 = 2d0e6efea8f8082c9703cf6636c4a2195c75b7ed
3. Take the last 6 characters and place 80 in front of them = 8075b7ed
4. This is are (P)Esn Hex 0x8075B7ED

So
Binary= 1010 000 100 000 000 000 000 000 000 000 010 010 010 100 101 101 111 0010
MEID Hex = A10000009296F2
MEID Dec = 270113177609606898
P(ESN) Hex = 0x8075B7ED
P(ESN) Dec = 12807714797

thx @amoamre

and this one

http://forum.gsmhosting.com/vbb/f513...n-meid-679859/


You cannot convert ESN > MEID, but you can get a pseudoESN (pESN) from an MEID.

http://www.tiaonline.org/standards/resources/esn/

An ESN type can be distinguished as a pseudo ESN (pESN) based on the first 8 bits ("manufacturer" code) as derived from the MEID using the SHA-1 algorithm to reduce a 56-bit MEID to a 24-bit ESN. The pESN codes are not unique, but will not match any UIMID or true ESN (tESN) because they have a unique manufacturer code of 0x80 (decimal 128).


wbr

Sir, i hv another blackberry 8330m . i want to use it on TATA Network . i write PRL Sucssefully with CDMA Workshope . bt after PRL writing My Phone Show
On standby signal is good but as soon as i make a call *228 the phone signal goes off and says "Call failed "

on ending call signal is full again.
Is there any Solution for TATA network in it .

read a good working Tata handset
read following

SID
NID
MCC 404
MNC 00
P CH A & B
S CH A & B
MODE : Automatic
Prl: Enabled
Otapa: Enabled
System: Standard
Nam lock on

Click on IMSi tab before writing all settings
Make sure you are using New tata Prl
After witing all settings dont forget to Click the mode Tab to reset
the phone

br,

Sir plz Upload TATA Tested PRL. can we transfer TATA Sim in blackberry ????

How can i unlock blackberry cdma from sprint 8530

http://forum.gsmhosting.com/vbb/6376172-post8.html

br,

ak singh upload uicdma qxdm how to do this process i cant understad how to change esn of blackberry 8330 how to use unicdma

here the process by unicdma

br,

I don't think discussing illegal activities is permitted here. It is a federal offense. Meaning JAILTIME, and more than likely fines. Besides, the equipment you would need isn't exactly available at radioshack

ya it,s useful but better it,s not in sticky thread

Dear Dynet

Hope u il be surprised knowing this , no one is authorised to keep a single
file of any brand unless he is having ASC

all files are owned by there respective manufactures & copyrighted
so is there anything to say in this regard ???

give me a single name of tool which is authorised by any manufacturer :D

LOL..........

as far as the ilegality is concerned already mentioned in thread its for educational purpose , check your country's law before using the procedures or software.

:)
True.. Well said
no one reads the "Disclaimers" put on any web sites or forums !
Do we?? Never !!

And as far as the legality is concerned how many of us from india use the licenced copy of windows xp or windows7 ??

All are ***** in bathtub !!

Not using more words to justify but in short i would like to conclude that it purely depends on a particular usage of a particular thing ! The type of Usage can b either positive or negative !
Br

i said better it,s not in sticky thread

ya i know it thanks for info
but not any Indian low involve if any other issue to forms authors by some ***** people

How To change Esn in Motorola Q ??? how to transfer Reliance Sim in motorla Q CDMA .

No solution yet

br,

is there any way to transfer reliance no. in that ???

well one need to transfer or write esn and min for service transfer ,at the moment in MOTO q its not possible

br,

how to unlock blackberry 8330 cdma RIM TO TATA
 

Kindly read this > http://forum.gsmhosting.com/vbb/6376172-post8.html

br,

7250 os ver 4.1.1.12

Scanning memory for readable areas:
Unreadable area from: 0000:0000
- Readable area from: 1000:0000
Unreadable area from: 101C:0000
- Readable area from: 5000:0000
Unreadable area from: 6000:0000
- Readable area from: 8000:0000
Unreadable area from: 8001:0000

ESN address has been found at: 1002:2610
ESN address has been found at: 1006:C9B0
ESN address has been found at: 1007:7780
ESN address has been found at: 1008:846C
ESN address has been found at: 1009:5E0C
ESN address has been found at: 1012:31E4
ESN address has been found at: 1017:9DE9

ESN can be change, how to change PIN ?

@opik

Bad news for you. Your bb pin is device specific and is given at the time of manufacturing and is unique. Thus, you cannot change the pin of your blackberry. You`ll have to do with your current pin.

br,

thx 4 the answer,

Is it posible to chane PIN on CDMA type like 7250 8830 8330 8703e 7103e 8130, etc ?