3.7 Beta Version test report !!

[.::Gsmdenis::.]

To testers:


This only for beta tester, do not ask download link !


Can test for Diag function for S1 S2 S3 ! Also can test flash/restore !


This version have many improves and changes, Once the release version ready we will write more information !


thank you for support us !


Br.,


Have a great day ahead !


Denis

[.::Gsmdenis::.]

Seems now people all are using facebook , anyway here have something you may interesting

https://www.facebook.com/gsmdenis

[cfrancoov]

Have tested a S1 42mm diags and everything was fine.
But when trying to enter diags on a S1 38mm this happens:

[info] Selected port: COM6
[info] Use DCSD cable selected
[info] Device present connection uses normal backend
[info] Connecting...
[info] Current thread priority is 0x0
[info] stage 1, heap grooming ...
[info] stage 2, aquired
[info] stage 3, exploit
[info] Uploading payload
[done] Device is now in pwned DFU Mode!
[info] Allready installed usb driver.
[info] Sending FirstStage
[info] Allready installed usb driver.
[info] Sending DiagsStage
Device not found but should be allready in Diag Mode.
Please check driver and manually update the driver if required or try again!
[done] Operation finished!


App says that it should be already in dfu mode but isn't, when closing and reopen the app the watch is not recognized, need to force exit dfu to make it work again.

This exact same thing happen on 2 S1 38mm...

[LuandersonGama]

Originally Posted by .::Gsmdenis::.

Seems now people all are using facebook , anyway here have something you may interesting

https://www.facebook.com/gsmdenis

news about ipad a1673?

[.::Gsmdenis::.]

Originally Posted by LuandersonGama

news about ipad a1673?

no yes ! it's watch only !

[.::Gsmdenis::.]

Originally Posted by cfrancoov

Have tested a S1 42mm diags and everything was fine.
But when trying to enter diags on a S1 38mm this happens:

[info] Selected port: COM6
[info] Use DCSD cable selected
[info] Device present connection uses normal backend
[info] Connecting...
[info] Current thread priority is 0x0
[info] stage 1, heap grooming ...
[info] stage 2, aquired
[info] stage 3, exploit
[info] Uploading payload
[done] Device is now in pwned DFU Mode!
[info] Allready installed usb driver.
[info] Sending FirstStage
[info] Allready installed usb driver.
[info] Sending DiagsStage
Device not found but should be allready in Diag Mode.
Please check driver and manually update the driver if required or try again!
[done] Operation finished!


App says that it should be already in dfu mode but isn't, when closing and reopen the app the watch is not recognized, need to force exit dfu to make it work again.

This exact same thing happen on 2 S1 38mm...

Seems working , you may try again , thanks

[harry_gupta]

[info] Selected port: COM1
[info] Device present connection uses normal backend
[info] Connecting...
[info] Current thread priority is 0x0
[info] stage 1, heap grooming ...
[info] stage 2, aquired
[info] stage 3, exploit
[erro] Exploit failed! stage 3
[done] Operation finished!
[info] Opening \\.\COM1 with baudrate 115200
[erro] Opening aborted, no response from device!
[info] Device is not detected in DFU mode! Please put your device in DFU mode manually!
[done] Operation finished!
[info] Device present connection uses normal backend
[info] Connecting...
[info] Current thread priority is 0x0
[info] stage 1, heap grooming ...
[info] stage 2, aquired
[erro] Failed to push forward overwrite offset.
[info] stage 3, exploit
[info] Uploading payload
[erro] Exploit failed!
[done] Operation finished!
[info] Device present connection uses normal backend
[info] Connecting...
[info] Current thread priority is 0x0
[info] stage 1, heap grooming ...
[info] stage 2, aquired
[erro] Failed to push forward overwrite offset.
[info] stage 3, exploit
[info] Uploading payload
[erro] Exploit failed!
[done] Operation finished!

[harry_gupta]

this error on iwatch s2

[iluxa_s]

I tested two s1 38 mm diag function - works fine

[iluxa_s]

I tested two s1 38 mm diag function - works fine

[.::Gsmdenis::.]

Originally Posted by harry_gupta

this error on iwatch s2

Repeat the procedure again then

[oljack]

How can I become a beta tester?

[.::Gsmdenis::.]

Originally Posted by oljack

How can I become a beta tester?

Send email to [email protected] with username information etc.


thanks

[sotovikcpsg]

Originally Posted by cfrancoov

Have tested a S1 42mm diags and everything was fine.
But when trying to enter diags on a S1 38mm this happens:

[info] Selected port: COM6
[info] Use DCSD cable selected
[info] Device present connection uses normal backend
[info] Connecting...
[info] Current thread priority is 0x0
[info] stage 1, heap grooming ...
[info] stage 2, aquired
[info] stage 3, exploit
[info] Uploading payload
[done] Device is now in pwned DFU Mode!
[info] Allready installed usb driver.
[info] Sending FirstStage
[info] Allready installed usb driver.
[info] Sending DiagsStage
Device not found but should be allready in Diag Mode.
Please check driver and manually update the driver if required or try again!
[done] Operation finished!


App says that it should be already in dfu mode but isn't, when closing and reopen the app the watch is not recognized, need to force exit dfu to make it work again.

This exact same thing happen on 2 S1 38mm...

has same issue with s1 38mm. tried on 2 different pc with normal cable and with dcsd cable. devices disconnects from pc after all procedures, need to put again to dfu mode.

[.::Gsmdenis::.]

This topic closed , using release version !

https://forum.gsmhosting.com/vbb/f93...3-7-a-2985425/