★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ - Page 166 - GSM-Forum

rehmani · 04-16-2017, 14:19

zte m131 unlock done

Code:

Port    : COM73 : ZTE CDMA Handset Diagnostics Interface (COM73)
Baud Rate    : 921600
Device    : ZTE C132
Operation    : Unlock
Opening Port... OK
Reading Information... OK
Compile    : Nov 13 2013 19:01:55
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.C1
ESN    : 80427---
MEID    : A1000049BE----
Unlocking Security... OK
Build    : V.MTS.C132.B05
Soft Ver.    : SSTL_S183_NL_RBTL40NV1.0.0B02
Detected    : C132
User Code    : 0000
Checking if Supported for Unlock... OK
Setting Download Mode... OK
Waiting for Reconnect... OK
Preparing Phone... OK
Sending Bootloader... OK
Initializing Bootloader... OK
Initializing Flash Chip... OK
Flash Chip    : SPANSION S71VS128RC0
Chip Size    : 16 MB
Unlocking Phone... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:57
Module Ver. [1.6]
Error Saving Log File!

pinki222 · 04-17-2017, 05:51

samsung s6 edge network lock unlock by umt tested by me

pinki222 · 04-17-2017, 05:53

redme 3s prime pattern unlock by umt qcfire0.5 formate fs tested by me but use edl cable

.::THE ROCK::. · 04-17-2017, 09:28

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Mi Account Reset (Fastboot)
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver. : 0.5
Product : MSM8226
Warranty : Yes
Bootloader : Locked
Resetting Mi Account Lock... Done
Rebooting to Normal Mode... Done
Operation Finished.
Elapsed Time: 00:05
[Module Ver. 3.8]
Log Saved to Logs\170417_124819.log

pratikbiswas36 · 04-17-2017, 15:58

Asus X003 Indian read and write done

.::THE ROCK::. · 04-17-2017, 16:32

Operation : Reset Mi Account
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : HS-USB Diagnostics 9008 (COM21)
Driver Info : Mobile, qcusbser.sys, 2.1.0.3
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1F00400 [8937] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8937.ufl]... Done
Executing Loader... OK
Hardware : 8937, eMMC, 32 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : Xiaomi Redmi 3S [msm8937]
Software : MMB29M, V8.1.1.0.MALMIDI [Tue Nov 8 11:47:48 CST 2016]
Android Ver. : 6.0.1
Reading Data... Done
Resetting Mi Account... Done
Operation Finished.

pcphone · 04-17-2017, 18:11

niloy2007 · 04-18-2017, 06:55

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM43 : SAMSUNG Mobile USB Modem #6
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J320F
IMEI: 355923072108982
Software: J320FDDU0APL1/J320FODD0APK4/J320FDDU0APK3/J320FDDU0APL1
Init Download Mode... OK
Port: COM10 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:02
[Ultimate Samsung Flasher v1.1]

rehmani · 04-18-2017, 08:06

samsung g355h flash done

Code:

Device: GT-I8190
Operation: Flash Firmware
Port: COM10 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SC7715 [HiSpeed]
Sending Partition [BOOT]... Done
Sending Partition [SBL1]... Done
Sending Partition [SBL2]... Done
Sending Partition [PARAM]... Done
Sending Partition [KERNEL]... Done
Sending Partition [RECOVERY]... Done
Sending Partition [system]... Done
Sending Partition [MODEM]... Done
Sending Partition [WDSP]... Done
Sending Partition [FIXNV2]... Done
Sending Partition [CSC]... Done
Sending Partition [HIDDEN]... Done
Closing Session... Done
Operation Finished.
Elapsed Time: 07:51
[Ultimate Samsung Flasher v1.1]

niloy2007 · 04-18-2017, 14:23

Device: SM-G531F
Operation: FRP Reset Package
Processing Reset Package... Done
Port: COM46 : SAMSUNG Mobile USB Modem #8
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G531F
IMEI: 355261074022137
Software: G531FDDU1APJ2/G531FODD1APJ2/G531FDDU1APJ2/G531FDDU1APJ2
Init Download Mode... OK
Port: COM10 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: PXA1L88 [HiSpeed]
Applying Reset Package... Done
Closing Session... Done
Operation Finished.
Elapsed Time: 01:00
[Ultimate Samsung Flasher v1.1]

Device: GT-I8190
Operation: Reset FRP / RL / EE
Port: COM46 : SAMSUNG Mobile USB Modem #8
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G531F
IMEI: 355261074022137
Software: G531FDDU1APJ2/G531FODD1APJ2/G531FDDU1APJ2/G531FDDU1APJ2
Init Download Mode... OK
Port: COM10 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: PXA1L88 [HiSpeed]
Resetting FRP Lock Data... Done
Elapsed Time: 00:56
[Ultimate Samsung Flasher v1.1]

.::THE ROCK::. · 04-18-2017, 15:25

Operation : Format FS
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : HS-USB Diagnostics 9008 (COM21)
Driver Info : Mobile, qcusbser.sys, 2.1.0.3
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1507000 [8916] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8916.ufl]... Done
Executing Loader... OK
Hardware : 8916, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : vivo vivo Y21L [msm8916]
Software : LMY47V release-keys, eng.compiler.20170217 [Fri Feb 17 19:20:15 CST 2017]
Android Ver. : 5.1.1
Preparing Data... Done
Formatting Userdata... Done
Operation Finished.

vinodkumarswc · 04-18-2017, 15:48

Operation : Reset FRP
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1B00600 [8940] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8940.ufl]... Done
Executing Loader... OK
Hardware : 8937, eMMC, 32 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : OPPO CPH1701 [msm8937]
Software : CPH1701EX_11_A.08_170310, eng.root.20170310.110221 [Fri Mar 10 11:05:05 CST 2017]
Android Ver. : 6.0.1
Resetting FRP Lock... . . Done
Operation Finished.

vinodkumarswc · 04-18-2017, 15:49

Operation : Format FS
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1B00600 [8940] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8940.ufl]... Done
Executing Loader... OK
Hardware : 8937, eMMC, 32 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : OPPO CPH1701 [msm8937]
Software : CPH1701EX_11_A.08_170310, eng.root.20170310.110221 [Fri Mar 10 11:05:05 CST 2017]
Android Ver. : 6.0.1
Preparing Data... Done
Formatting Userdata... Done
Operation Finished.

.::THE ROCK::. · 04-18-2017, 17:47

Operation : Format FS
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : HS-USB Diagnostics 9008 (COM21)
Driver Info : Mobile, qcusbser.sys, 2.1.0.3
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1507000 [8916] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8916.ufl]... Done
Executing Loader... OK
Hardware : 8916, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : Xiaomi wt88047 [msm8916]
Software : LMY47V, V7.2.1.0.LHJMIDB [Fri Apr 8 14:46:19 CST 2016]
Android Ver. : 5.1.1
Preparing Data... Done
Formatting Userdata... Done
Operation Finished.

vinodkumarswc · 04-19-2017, 06:47

a37f oppo pettern done
Operation : Format FS
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1507000 [8916] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8916.ufl]... Done
Executing Loader... OK
Hardware : 8916, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_170302, 1480422943 [Thu Mar 2 08:44:55 CST 2017]
Android Ver. : 5.1.1
Preparing Data... Done
Formatting Userdata... Done
Operation Finished.

04-17-2017, 09:28	#2479 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	mi 2014712 not 4g mi account done Port : Fastboot Interface Baud Rate : Not Applicable Device : Generic Operation : Mi Account Reset (Fastboot) Searching for Device in FastBoot Mode... OK Reading Information... OK FastBoot Ver. : 0.5 Product : MSM8226 Warranty : Yes Bootloader : Locked Resetting Mi Account Lock... Done Rebooting to Normal Mode... Done Operation Finished. Elapsed Time: 00:05 [Module Ver. 3.8] Log Saved to Logs\170417_124819.log

04-17-2017, 16:32	#2481 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	MI 3S PRIME mi account or + when power on mi account done Operation : Reset Mi Account Checking for existing devices... Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : HS-USB Diagnostics 9008 (COM21) Driver Info : Mobile, qcusbser.sys, 2.1.0.3 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1F00400 [8937] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8937.ufl]... Done Executing Loader... OK Hardware : 8937, eMMC, 32 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : Xiaomi Redmi 3S [msm8937] Software : MMB29M, V8.1.1.0.MALMIDI [Tue Nov 8 11:47:48 CST 2016] Android Ver. : 6.0.1 Reading Data... Done Resetting Mi Account... Done Operation Finished.

04-17-2017, 18:11	#2482 (permalink)
pcphone Junior Member Join Date: Apr 2003 Location: Taiwan Posts: 31 Member: 25981 Status: Offline Thanks Meter: 13	oppo A37F read pattern

04-18-2017, 06:55	#2483 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	Samsung j320f.......frp done...... Device: Samsung Device Operation: Reset FRP (New Method) Port: COM43 : SAMSUNG Mobile USB Modem #6 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-J320F IMEI: 355923072108982 Software: J320FDDU0APL1/J320FODD0APK4/J320FDDU0APK3/J320FDDU0APL1 Init Download Mode... OK Port: COM10 : SAMSUNG Mobile USB Modem Reading Data from Phone... Done Chipset: SPRD8735 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 01:02 [Ultimate Samsung Flasher v1.1]

04-18-2017, 14:23	#2485 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	Samsung g531f........ Device: SM-G531F Operation: FRP Reset Package Processing Reset Package... Done Port: COM46 : SAMSUNG Mobile USB Modem #8 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-G531F IMEI: 355261074022137 Software: G531FDDU1APJ2/G531FODD1APJ2/G531FDDU1APJ2/G531FDDU1APJ2 Init Download Mode... OK Port: COM10 : SAMSUNG Mobile USB Modem Reading Data from Phone... Done Chipset: PXA1L88 [HiSpeed] Applying Reset Package... Done Closing Session... Done Operation Finished. Elapsed Time: 01:00 [Ultimate Samsung Flasher v1.1] Device: GT-I8190 Operation: Reset FRP / RL / EE Port: COM46 : SAMSUNG Mobile USB Modem #8 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-G531F IMEI: 355261074022137 Software: G531FDDU1APJ2/G531FODD1APJ2/G531FDDU1APJ2/G531FDDU1APJ2 Init Download Mode... OK Port: COM10 : SAMSUNG Mobile USB Modem Reading Data from Phone... Done Chipset: PXA1L88 [HiSpeed] Resetting FRP Lock Data... Done Elapsed Time: 00:56 [Ultimate Samsung Flasher v1.1]

04-17-2017, 05:51	#2477 (permalink)
pinki222 Major Poster Join Date: Oct 2011 Posts: 42 Member: 1667288 Status: Offline Sonork: 7808907822 Thanks Meter: 4	samsung s6 edge network lock unlock by umt tested by me

04-17-2017, 05:53	#2478 (permalink)
pinki222 Major Poster Join Date: Oct 2011 Posts: 42 Member: 1667288 Status: Offline Sonork: 7808907822 Thanks Meter: 4	redme 3s prime pattern unlock by umt qcfire0.5 formate fs tested by me but use edl cable

04-17-2017, 15:58	#2480 (permalink)
pratikbiswas36 Junior Member Join Date: Aug 2015 Location: Shyamnagar Posts: 25 Member: 2438354 Status: Offline Thanks Meter: 0	Asus X003 Indian read and write done

04-18-2017, 15:25	#2486 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	Vivo y21l pattern remove just click format phone Operation : Format FS Checking for existing devices... Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : HS-USB Diagnostics 9008 (COM21) Driver Info : Mobile, qcusbser.sys, 2.1.0.3 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1507000 [8916] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8916.ufl]... Done Executing Loader... OK Hardware : 8916, eMMC, 16 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : vivo vivo Y21L [msm8916] Software : LMY47V release-keys, eng.compiler.20170217 [Fri Feb 17 19:20:15 CST 2017] Android Ver. : 5.1.1 Preparing Data... Done Formatting Userdata... Done Operation Finished.

04-18-2017, 15:48	#2487 (permalink)
vinodkumarswc Freak Poster Join Date: Mar 2008 Location: India Posts: 435 Member: 718338 Status: Offline Sonork: 100.1623688 Thanks Meter: 43	oppo a57 frp n pettern Operation : Reset FRP Checking for existing devices... Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : Qualcomm HS-USB QDLoader 9008 (COM6) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1B00600 [8940] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8940.ufl]... Done Executing Loader... OK Hardware : 8937, eMMC, 32 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : OPPO CPH1701 [msm8937] Software : CPH1701EX_11_A.08_170310, eng.root.20170310.110221 [Fri Mar 10 11:05:05 CST 2017] Android Ver. : 6.0.1 Resetting FRP Lock... . . Done Operation Finished.

04-18-2017, 15:49	#2488 (permalink)
vinodkumarswc Freak Poster Join Date: Mar 2008 Location: India Posts: 435 Member: 718338 Status: Offline Sonork: 100.1623688 Thanks Meter: 43	Operation : Format FS Checking for existing devices... Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : Qualcomm HS-USB QDLoader 9008 (COM6) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1B00600 [8940] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8940.ufl]... Done Executing Loader... OK Hardware : 8937, eMMC, 32 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : OPPO CPH1701 [msm8937] Software : CPH1701EX_11_A.08_170310, eng.root.20170310.110221 [Fri Mar 10 11:05:05 CST 2017] Android Ver. : 6.0.1 Preparing Data... Done Formatting Userdata... Done Operation Finished.

04-18-2017, 17:47	#2489 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	mi 2014818 pattern format done (no imei+bassbend lost risk) Operation : Format FS Checking for existing devices... Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : HS-USB Diagnostics 9008 (COM21) Driver Info : Mobile, qcusbser.sys, 2.1.0.3 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1507000 [8916] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8916.ufl]... Done Executing Loader... OK Hardware : 8916, eMMC, 16 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : Xiaomi wt88047 [msm8916] Software : LMY47V, V7.2.1.0.LHJMIDB [Fri Apr 8 14:46:19 CST 2016] Android Ver. : 5.1.1 Preparing Data... Done Formatting Userdata... Done Operation Finished.

04-19-2017, 06:47	#2490 (permalink)
vinodkumarswc Freak Poster Join Date: Mar 2008 Location: India Posts: 435 Member: 718338 Status: Offline Sonork: 100.1623688 Thanks Meter: 43	a37f oppo pettern done Operation : Format FS Checking for existing devices... Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : Qualcomm HS-USB QDLoader 9008 (COM6) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1507000 [8916] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8916.ufl]... Done Executing Loader... OK Hardware : 8916, eMMC, 16 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : OPPO A37f [msm8916] Software : A37fEX_11_170302, 1480422943 [Thu Mar 2 08:44:55 CST 2017] Android Ver. : 5.1.1 Preparing Data... Done Formatting Userdata... Done Operation Finished.