★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ - Page 167 - GSM-Forum

rehmani · 04-19-2017, 08:54

lyf ls 5016 reset and read rom done

Code:

Operation    : Reset FRP
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.0.8.7
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1009600 [8909] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8909.ufl]... Done
Executing Loader... OK
Hardware    : 8909, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device    : LYF LS-5016 [msm8909]
Software    : LS-5016-S17B_LYF_L12EN_200_160824, 3da208e [Sat Dec 31 20:51:49 CST 2016]
Android Ver.    : 6.0.1
Resetting FRP Lock... . . Done
Operation Finished.

Code:

Operation    : Read Firmware
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.0.8.7
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1009600 [8909] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8909.ufl]... Done
Executing Loader... OK
Hardware    : 8909, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device    : LYF LS-5016 [msm8909]
Software    : LS-5016-S17B_LYF_L12EN_200_160824, 3da208e [Sat Dec 31 20:51:49 CST 2016]
Android Ver.    : 6.0.1
Reading [modem]... Done
Reading [sbl1]... Done
Reading [sbl1bak]... Done
Reading [aboot]... Done
Reading [abootbak]... Done
Reading [rpm]... Done
Reading [rpmbak]... Done
Reading [tz]... Done
Reading [tzbak]... Done
Reading [misc]... Done
Reading [splash]... Done
Reading [sec]... Done
Reading [boot]... Done
Reading [system]... Done
Reading [persist]... Done
Reading [cache]... Done
Reading [recovery]... Done
Reading [userdata]... Done
Reading [PrimaryGPT]... Done
Reading [BackupGPT]... Done
Operation Finished.

niloy2007 · 04-19-2017, 14:36

Operation : Format FS
Checking for existing devices... Found
Port : COM4
Opening Port... OK
Init Handshake Sequence... OK
Hardware ID : E1009600 [8909] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8909.ufl]... Done
Executing Loader... OK
Hardware : 8909, eMMC, 16 GB
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : unknown LS-5016 [msm8909]
Software : LS-5016-S17A_LYF_L11EN_202_160229, cbf86c6 [Sat Aug 20 16:55:42 CST 2016]
Android Ver. : 5.1.1
Preparing Data... Done
Formatting Userdata... Done
Operation Finished.

niloy2007 · 04-20-2017, 09:02

Code:

Operation : Flash Checking for existing devices... Found Port : COM4 Opening Port... OK Init Handshake Sequence... OK Hardware ID : E1009600 [8909] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8909.ufl]... Done Executing Loader... OK Hardware : 8909, eMMC, 16 GB Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512 Writing NON-HLOS.bin ... Done Writing sbl1.mbn ... Done Writing sbl1.mbn ... Done Writing emmc_appsboot.mbn ... Done Writing emmc_appsboot.mbn ... Done Writing rpm.mbn ... Done Writing rpm.mbn ... Done Writing tz.mbn ... Done Writing tz.mbn ... Done Writing splash.img ... Done Writing sec.dat ... Done Writing boot.img ... Done Writing system_1.img ... Done Writing system_2.img ... Done Writing system_3.img ... Done Writing system_4.img ... Done Writing system_5.img ... Done Writing system_6.img ... Done Writing system_7.img ... Done Writing system_8.img ... Done Writing system_9.img ... Done Writing system_10.img ... Done Writing system_11.img ... Done Writing system_12.img ... Done Writing system_13.img ... Done Writing system_14.img ... Done Writing system_15.img ... Done Writing system_16.img ... Done Writing system_17.img ... Done Writing system_18.img ... Done Writing system_19.img ... Done Writing system_20.img ... Done Writing system_21.img ... Done Writing system_22.img ... Done Writing system_23.img ... Done Writing system_24.img ... Done Writing system_25.img ... Done Writing system_26.img ... Done Writing system_27.img ... Done Writing system_28.img ... Done Writing system_29.img ... Done Writing system_30.img ... Done Writing system_31.img ... Done Writing system_32.img ... Done Writing system_33.img ... Done Writing persist_1.img ... Done Writing cache_1.img ... Done Writing cache_2.img ... Done Writing cache_3.img ... Done Writing recovery.img ... Done Writing zero_512k.bin ... Done Writing userdata_1.img ... Done Writing userdata_2.img ... Done Writing userdata_3.img ... Done Writing userdata_4.img ... Done Writing userdata_5.img ... Done Writing userdata_6.img ... Done Writing userdata_7.img ... Done Writing userdata_8.img ... Done Writing userdata_9.img ... Done Writing userdata_10.img ... Done Writing userdata_11.img ... Done Writing userdata_12.img ... Done Writing userdata_13.img ... Done Writing userdata_14.img ... Done Writing userdata_15.img ... Done Writing userdata_16.img ... Done Writing userdata_17.img ... Done Writing userdata_18.img ... Done Writing userdata_19.img ... Done Writing userdata_20.img ... Done Writing gpt_main0.bin ... Done Writing gpt_backup0.bin ... Done Applying Patches... . . . . . . . . . . . . . Done Resetting device... Done Operation Finished.

niloy2007 · 04-20-2017, 10:02

Code:

Operation    : Format FS
Checking for existing devices... Found
Port    : COM4
Opening Port... OK
Init Handshake Sequence... OK
Hardware ID    : E1507000 [8916] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8916.ufl]... Done
Executing Loader... OK
Hardware    : 8916, eMMC, 16 GB
Payload Info    : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device    : YU YU5010A [msm8916]
Software    : YU-YU5010_V010_081015, YU-YU5010_V010_081015 [Mon Jan 18 12:07:59 CST 2016]
Android Ver.    : 5.1.1
Preparing Data... Done
Formatting Userdata... Done
Operation Finished.

niloy2007 · 04-20-2017, 12:29

Code:

Operation    : Flash
Checking for existing devices... Found
Port    : COM4
Opening Port...
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1507000 [8916] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8916.ufl]... Done
Executing Loader... OK
Hardware    : 8916, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Writing NON-HLOS.bin ... Done
Writing sbl1.mbn ... Done
Writing sbl1.mbn ... Done
Writing rpm.mbn ... Done
Writing rpm.mbn ... Done
Writing tz.mbn ... Done
Writing tz.mbn ... Done
Writing hyp.mbn ... Done
Writing hyp.mbn ... Done
Writing splash.img ... Done
Writing sec.dat ... Done
Writing emmc_appsboot.mbn ... Done
Writing emmc_appsboot.mbn ... Done
Writing boot.img ... Done
Writing recovery.img ... Done
Writing system.img ... Done
Writing cache.img ... Done
Writing persist.img ... Done
Writing userdata.img ... Done
Writing gpt_main0.bin ... Done
Writing gpt_backup0.bin ... Done
Applying Patches... . . . . . . . . . . . . . Done
Resetting device... Done
Operation Finished.

rehmani · 04-20-2017, 14:06

redmi 3s flash done

Code:

Operation    : Flash
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM42)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.0.8.7
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1F00400 [8937] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8937.ufl]... Done
Executing Loader... OK
Hardware    : 8937, eMMC, 32 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing NON-HLOS.bin ... Done
Writing sbl1.mbn ... Done
Writing sbl1.mbn ... Done
Writing rpm.mbn ... Done
Writing rpm.mbn ... Done
Writing tz.mbn ... Done
Writing tz.mbn ... Done
Writing devcfg.mbn ... Done
Writing devcfg.mbn ... Done
Writing adspso.bin ... Done
Writing splash.img ... Done
Writing emmc_appsboot.mbn ... Done
Writing emmc_appsboot.mbn ... Done
Writing boot.img ... Done
Writing recovery.img ... Done
Writing system.img ... Done
Writing cache.img ... Done
Writing persist.img ... Done
Writing mdtp.img ... Done
Writing lksecapp.mbn ... Done
Writing lksecapp.mbn ... Done
Writing cmnlib.mbn ... Done
Writing cmnlib.mbn ... Done
Writing cmnlib64.mbn ... Done
Writing cmnlib64.mbn ... Done
Writing keymaster.mbn ... Done
Writing keymaster.mbn ... Done
Writing cust.img ... Done
Writing userdata.img ... Done
Writing gpt_main0.bin ... Done
Writing gpt_backup0.bin ... Done
Applying Patches... . . . . . . . . . . . . . Done
Resetting device... Done
Operation Finished.

.::THE ROCK::. · 04-20-2017, 14:28

Operation : Format FS
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : HS-USB Diagnostics 9008 (COM21)
Driver Info : Mobile, qcusbser.sys, 2.1.0.3
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1507000 [8916] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8916.ufl]... Done
Executing Loader... OK
Hardware : 8916, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : vivo vivo Y21L [msm8916]
Software : LMY47V release-keys, eng.compiler.20170228 [Tue Feb 28 18:18:53 CST 2017]
Android Ver. : 5.1.1
Preparing Data... Done
Formatting Userdata... Done
Operation Finished.

vinodkumarswc · 04-20-2017, 16:06

One more a37f frp done n lyf 4503 frp done with ease
Yes umt rocks

Sent from my 2014818 using Tapatalk

mr_ashiq · 04-20-2017, 17:05

Port : ADB Interface
Baud Rate : Not Applicable
Device : Samsung Marvel Phones
Operation : Direct Unlock
Searching for Device... Found
Model : SM-G531F
Version : 5.1.1
Hardware : pxa1908
Baseband : G531FDDU1AOH1
CPU : armeabi-v7a
SIM Card : READY
Type : Unknown
MEID(1) : Null/Empty
Checking Root Access... OK
Root : Rooted
Reading Data from Phone... Done
Reading MSL Data... Done
Enabling UART Port... OK
Initializing AT Daemon...

NOT WORK WITH 10 MIN

Rui Romano · 04-20-2017, 23:21

SM-J320F flashing done with UMT

Quote:

Device: GT-I8190
Operation: Flash Firmware
Port: COM37 : SAMSUNG Mobile USB Modem #6
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Sending Partition [KERNEL]... Done
Sending Partition [CACHE]... Done
Sending Partition [HIDDEN]... Done
Sending Partition [l_fixnv2]... Done
Sending Partition [pm_sys]... Done
Sending Partition [RECOVERY]... Done
Sending Partition [SBOOT2]... Done
Sending Partition [SBOOT]... Done
Sending Partition [BOOT]... Done
Sending Partition [l_modem]... Done
Sending Partition [l_gdsp]... Done
Sending Partition [l_ldsp]... Done
Sending Partition [l_warm]... Done
Sending Partition [SYSTEM]... Done
Closing Session... Done
Operation Finished.
Elapsed Time: 05:44
[Ultimate Samsung Flasher v0.9]

vinodkumarswc · 04-21-2017, 06:01

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM28 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:13
[Ultimate Samsung Flasher v1.1]

Mobile_Care® · 04-21-2017, 07:22

Moto Z Play XT1635 FRP Remove Done

4G Telecom · 04-21-2017, 14:00

Mi 4a User lock Remove done

niloy2007 · 04-22-2017, 07:05

Code:

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM47 : SAMSUNG Mobile USB Modem #9
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J210F
IMEI: 354175081019749
Software: J210FXXU0APH2/J210FODD0APH2/J210FXXU0APF8/J210FXXU0APH2
Init Download Mode... OK
Port: COM10 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:01
[Ultimate Samsung Flasher v1.1]

niloy2007 · 04-22-2017, 12:52

Code:

Device: SM-G531F
Operation: FRP Reset Package
Processing Reset Package... Done
Port: COM10 : SAMSUNG Mobile USB Modem
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: PXA1L88 [HiSpeed]
Applying Reset Package... Done
Closing Session... Done
Operation Finished.
Elapsed Time: 00:16
[Ultimate Samsung Flasher v1.1]
Reset Package Applied. Now you can reset FRP.

Code:

Device: GT-I8190
Operation: Reset FRP / RL / EE
Port: COM48 : SAMSUNG Mobile USB Modem #10
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G531F
IMEI: 352302075823520
Software: G531FDDU1AOH2/G531FODD1AOH2/G531FDDU1AOH1/G531FDDU1AOH2
Init Download Mode... OK
Port: COM10 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: PXA1L88 [HiSpeed]
Resetting FRP Lock Data... Done
Elapsed Time: 00:55
[Ultimate Samsung Flasher v1.1]

04-19-2017, 14:36	#2492 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	Lyf-5016 done Operation : Format FS Checking for existing devices... Found Port : COM4 Opening Port... OK Init Handshake Sequence... OK Hardware ID : E1009600 [8909] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8909.ufl]... Done Executing Loader... OK Hardware : 8909, eMMC, 16 GB Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : unknown LS-5016 [msm8909] Software : LS-5016-S17A_LYF_L11EN_202_160229, cbf86c6 [Sat Aug 20 16:55:42 CST 2016] Android Ver. : 5.1.1 Preparing Data... Done Formatting Userdata... Done Operation Finished.

04-20-2017, 14:28	#2497 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	Vivo y21l pattern remove just click format phone Operation : Format FS Checking for existing devices... Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : HS-USB Diagnostics 9008 (COM21) Driver Info : Mobile, qcusbser.sys, 2.1.0.3 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1507000 [8916] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8916.ufl]... Done Executing Loader... OK Hardware : 8916, eMMC, 16 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : vivo vivo Y21L [msm8916] Software : LMY47V release-keys, eng.compiler.20170228 [Tue Feb 28 18:18:53 CST 2017] Android Ver. : 5.1.1 Preparing Data... Done Formatting Userdata... Done Operation Finished.

04-21-2017, 06:01	#2501 (permalink)
vinodkumarswc Freak Poster Join Date: Mar 2008 Location: India Posts: 435 Member: 718338 Status: Offline Sonork: 100.1623688 Thanks Meter: 43	j200g frp done with single click Device: Samsung Device Operation: Reset FRP (New Method) Port: COM28 : SAMSUNG Mobile USB Modem #4 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: LSI3475 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 00:13 [Ultimate Samsung Flasher v1.1]

04-20-2017, 16:06	#2498 (permalink)
vinodkumarswc Freak Poster Join Date: Mar 2008 Location: India Posts: 435 Member: 718338 Status: Offline Sonork: 100.1623688 Thanks Meter: 43	One more a37f frp done n lyf 4503 frp done with ease Yes umt rocks Sent from my 2014818 using Tapatalk

04-20-2017, 17:05	#2499 (permalink)
mr_ashiq Insane Poster Join Date: Mar 2010 Location: GHURKA BELTOLA,SIRAJGONJ ,BD Posts: 97 Member: 1265808 Status: Offline Sonork: 1660165 Thanks Meter: 21	Port : ADB Interface Baud Rate : Not Applicable Device : Samsung Marvel Phones Operation : Direct Unlock Searching for Device... Found Model : SM-G531F Version : 5.1.1 Hardware : pxa1908 Baseband : G531FDDU1AOH1 CPU : armeabi-v7a SIM Card : READY Type : Unknown MEID(1) : Null/Empty Checking Root Access... OK Root : Rooted Reading Data from Phone... Done Reading MSL Data... Done Enabling UART Port... OK Initializing AT Daemon... NOT WORK WITH 10 MIN

04-21-2017, 07:22	#2502 (permalink)
Mobile_Care® Insane Poster Join Date: Jan 2014 Location: India Posts: 95 Member: 2110293 Status: Offline Sonork: 12312345 Thanks Meter: 103	Moto Z Play XT1635 FRP Remove Done

04-21-2017, 14:00	#2503 (permalink)
4G Telecom No Life Poster Join Date: Jul 2015 Location: India Posts: 597 Member: 2421242 Status: Offline Sonork: 100.1614558 Thanks Meter: 700	Mi 4a User lock Remove done