Dear Member I Have This Problem If I Flash 6300

[Mansoor]

I have 6300 which i was suppose to unlock it was verion 4.71 i wanted to downgread it to verion 4.70 so as i could unlock it(dont ask which box to use to unlock it)i downgreaded it to 4.70 and it was ok but could not unlock cause the conter was 3/3 and fbus was 10/10 i flashed it back to version 5.00 to use another box to unlock but becouse the counter was 3/3 and 10/10 it could not do it i read in the forum and got the idea to flash it with 5200 verion 3.92 snd unlock it i flash it but now the phone is dead if i use usb i get this as below:

FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw
PPM Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.ppm_c
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,French,Italian,Dutch,Spanish,Turkis h,Portuguese
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw
PPM Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.ppm_c
CNT Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.image_c
APE Variant file: NONE
Languages in ppm: English,German,French,Italian,Dutch,Spanish,Turkis h,Portuguese
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90000C70
P-key nokia module version 01.00
Init usb communication...
Found
Starting DEAD USB phone flashing...
Using 06.02.002
Elf2flash 02.33.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting.......................................... ....................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching phone...Found!
Phone failed to boot in flash mode CMT...
AND IF I USE FBUS I GET THIS:
JAF version 1.98.42
Detected PKEY: 90000C70
Card life counter: 52.35%
P-key nokia module version 01.00
Detected version: 01.B0, Driver version: 0, Library version: 0
JAF DCT4/BB5 LOADERS DIR: D:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: D:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: D:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: D:\Program Files\ODEON\JAF\Flash3\
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw
PPM Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.ppm_f
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Hebrew,Arabic,Russian
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw
PPM Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.ppm_f
CNT Flash file: D:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.image_d
APE Variant file: NONE
Languages in ppm: English,German,Hebrew,Arabic,Russian
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...
AND IF I UNLOCK CRT 308 I GET THIS:
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...
SO what can do??????

[tito millo]

Ok bro u should flash with verison 05.00 and ASK for RPL calculation if u want to unlock and dont try to make a 5200 a 6300

BR,
Tito Millo

[Mansoor]

but read in the forum many member make 6300 to 5200 and unlock them but now the phone is dead the fist thing i need to revive it before unlock it

[mohamed75]

Originally Posted by Mansoor

but read in the forum many member make 6300 to 5200 and unlock them but now the phone is dead the fist thing i need to revive it before unlock it

in which fourm man,this method was posted in uid section and it is not atrustable method so better ask there for help

[Mansoor]

Originally Posted by mohamed75

in which fourm man,this method was posted in uid section and it is not atrustable method so better ask there for help

for me i just need to revive the phone this is my main problem as i talk now iam using JAF and it is the only box i have