GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Z3X-Team Products

Reply
 
LinkBack Thread Tools Display Modes
Old 06-10-2017, 09:12   #18676 (permalink)
No Life Poster
 
orhan5's Avatar
 
Join Date: Sep 2016
Location: IN THIS WORLD
Age: 27
Posts: 522
Member: 2621892
Status: Offline
Sonork: 1677742
Thanks Meter: 139
Cool E1190 repair imei dine


Selected model: E1190
Selected com port: COM3
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 7A
Sending loader2... OK
Repair IMEI block
Repair IMEI block
Repair - ok
Elapsed time: 70 second, sw ver: 3.5.0040
  Reply With Quote
Old 06-10-2017, 09:22   #18677 (permalink)
No Life Poster
 
orhan5's Avatar
 
Join Date: Sep 2016
Location: IN THIS WORLD
Age: 27
Posts: 522
Member: 2621892
Status: Offline
Sonork: 1677742
Thanks Meter: 139
Smile E1205t repair imei done

Operation: Repair
Selected model: GT-E1205T
Selected port: COM3 USB Serial Port, 460800
Software version: 28.2

Connect phone, press power button
Waiting phone... Ok
Sending PRELOADER... Ok
Flash ID: F8 (Fidelix_FM25M64A)
Sending LOADER... Ok
Checking LOADER... Ok
Reading FLASH... Ok
Phone version: E1205TJPLK2
HW version: MP 0.500
CSC country code: EGY
IMEI: 355974046553407
Writing EEP... Ok
Repair done (time - 00:00:59)

Done with Samsung Tool PRO v.28.2
  Reply With Quote
Old 06-10-2017, 12:13   #18678 (permalink)
No Life Poster
 
orhan5's Avatar
 
Join Date: Sep 2016
Location: IN THIS WORLD
Age: 27
Posts: 522
Member: 2621892
Status: Offline
Sonork: 1677742
Thanks Meter: 139
Cool N920t patch certificate done

Operation: Patch Certificate
Selected model: SM-N920T
Software version: 28.2

Waiting ADB device... Ok
Reading phone info...
Model: SM-N920T
Android version: 6.0.1
Product code: SM2N920TZDAZTO
Phone version: N920TUVU4DPK6
PDA version: N920TUVU4DPK6
CSC version: N920TUVU4DPK6
CSC country code: Brazil
CSC sales code: ZTO
HW version: REV0.2
Phone SN: RF8GC1H4SAZ
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-11-01
RF cal date: 20151224
IMEI:
Checking Super user right... true
Initialization zTool... Ok
Running zTool, please wait... Ok
Reading modem... Ok
Patching modem... Ok
Writing modem... Ok
Rebooting phone... Ok
Patching CERT check... done
Done with Samsung Tool PRO v.28.2
  Reply With Quote
Old 06-11-2017, 11:28   #18679 (permalink)
Freak Poster
 
ripon074's Avatar
 
Join Date: Jan 2014
Location: Cox`s Bazar, Bangladesh
Age: 27
Posts: 430
Member: 2097333
Status: Offline
Sonork: 100.1675582
Thanks Meter: 39
G532G unlock done after root

  Reply With Quote
Old 06-11-2017, 11:34   #18680 (permalink)
Freak Poster
 
ripon074's Avatar
 
Join Date: Jan 2014
Location: Cox`s Bazar, Bangladesh
Age: 27
Posts: 430
Member: 2097333
Status: Offline
Sonork: 100.1675582
Thanks Meter: 39
G361H frp reset done

  Reply With Quote
Old 06-11-2017, 14:08   #18681 (permalink)
No Life Poster
 
bright hlatini's Avatar
 
Join Date: Jul 2011
Location: contact me
Posts: 637
Member: 1614640
Status: Offline
Sonork: 100.1625899
Thanks Meter: 235
Donate money to this user
SAMSUNG GT E1200I NETWORK UNLOCK DONE

Operation: Unlock
Selected model: GT-E1200I
Selected port: COM18 Z3X BOX Serial Port
Software version: 28.0

Waiting phone... detected COM217
Sending FDL... Ok
Reconnecting phone... Ok
Reading NV... Ok
Checking NV... Ok
IMEI: 356561069561810
Phone HW: MP 0.400
Product code: GT-E1200ZKIVOP
Phone SN: R21FA3Q432
Sending NV... Ok
Unlock done

Done with Samsung Tool PRO v.28.0
  Reply With Quote
Old 06-11-2017, 19:44   #18682 (permalink)
No Life Poster
 
Gambitv01's Avatar
 
Join Date: Dec 2010
Location: Romania
Posts: 1,618
Member: 1475064
Status: Offline
Thanks Meter: 446
Donate money to this user
Operation: Reset FRP
Selected model: SM-G935T
Software version: 28.1

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... Ok
Reading phone info...
Model: SM-G935T
Android version: 7.0
Product code: SM-G935TZSATMB
Phone version: G935TUVS4BQC1
PDA version: G935TUVS4BQC1
CSC version: G935TTMB4BQC1
CSC country code: USA
CSC sales code: TMB
HW version: REV0.7
Phone SN: RF8H40WLEFL
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-03-01
RF cal date: 2016.04.09
IMEI:
Bypass FRP... Ok
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.28.1
  Reply With Quote
Old 06-11-2017, 20:23   #18683 (permalink)
No Life Poster
 
Gambitv01's Avatar
 
Join Date: Dec 2010
Location: Romania
Posts: 1,618
Member: 1475064
Status: Offline
Thanks Meter: 446
Donate money to this user
Operation: Write CERT
Selected model: SM-G920T
Software version: 28.1

Waiting ADB device...
Please, allow USB debugging on phone... Ok
Reading phone info...
Model: SM-G920T
Android version: 6.0.1
Product code:
Phone version: G920TUVS5EQA2
PDA version: G920TUVS5EQA2
CSC version: G920TTMB5EQA2
CSC country code: USA
CSC sales code: TMB
HW version:
Phone SN: R1234567890
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-01-01
RF cal date:
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Initialization zTool... Ok
Running zTool, please wait... Ok
HWID: 08 1F 47 1F 36 04 00 00 00 00 00 00 00 00 00 00
Calculating... Ok
Initialization AT RIL...
AT RIL stopped, restarting... Ok
Checking for compatible phone and cert
Phone KEY ID: 0346
Checking certificate file... Ok
KEY ID: 0346
Crypting CERT 1... Ok
Writing NV data... Ok
Rebooting phone... Ok
Write CERT done
Done with Samsung Tool PRO v.28.1

Operation: Unlock
Selected model: SM-G920T
Software version: 28.1

Waiting ADB device...
Please, allow USB debugging on phone... Ok
Reading phone info...
Model: SM-G920T
Android version: 6.0.1
Product code:
Phone version: G920TUVS5EQA2
PDA version: G920TUVS5EQA2
CSC version: G920TTMB5EQA2
CSC country code: USA
CSC sales code: TMB
HW version:
Phone SN: R1234567890
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-01-01
RF cal date:
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Initialization zTool... Ok
Running zTool, please wait... Ok
HWID: 08 1F 47 1F 36 04 00 00 00 00 00 00 00 00 00 00
Calculating... Ok
Unlocking... Ok
Writing NV data... Ok
Rebooting phone... Ok
Unlock done
Done with Samsung Tool PRO v.28.1
  Reply With Quote
Old 06-12-2017, 02:17   #18684 (permalink)
No Life Poster
 
Gambitv01's Avatar
 
Join Date: Dec 2010
Location: Romania
Posts: 1,618
Member: 1475064
Status: Offline
Thanks Meter: 446
Donate money to this user
Operation: Reset FRP
Selected model: SM-A710F
Software version: 28.2

Waiting ADB device... Ok
Reading phone info...
Model: SM-A710F
Android version: 5.1.1
Product code: SM-A710FZDDCAC
Phone version: A710FXXU2BPK1
PDA version: FA51_A710FXXU2APK1
CSC version:
CSC country code:
CSC sales code:
HW version: MP 0.200
Phone SN: RF8H12FPVTB
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2015-11-01
RF cal date: 20160129
IMEI:
Bypass FRP... Ok
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.28.2
  Reply With Quote
Old 06-12-2017, 09:30   #18685 (permalink)
No Life Poster
 
orhan5's Avatar
 
Join Date: Sep 2016
Location: IN THIS WORLD
Age: 27
Posts: 522
Member: 2621892
Status: Offline
Sonork: 1677742
Thanks Meter: 139
patch certificate j100h done

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.

Operation: Patch Certificate
Selected model: SM-J100H/DS
Software version: 28.2

Waiting ADB device...
Please, allow USB debugging on phone... Ok
Reading phone info...
Model: SM-J100H
Android version: 4.4.4
Product code: SM-J100HZWDETL
Phone version: J100HXXU0AOF2
PDA version: J100HXXU0AOF2
CSC version: J100HOJV0AOF2
CSC country code: UNITED ARAB EMIRAT
CSC sales code: THR
HW version: MP 0.201
Phone SN: RV1G82WS7DT
Modem board: sc7727s
RF cal date: 20150904
IMEI: 333333333333333
Checking Super user right... true
Patching CERT check... Ok
Rebooting phone... Ok
Patching CERT check... done

Done with Samsung Tool PRO v.28.2
  Reply With Quote
Old 06-12-2017, 10:03   #18686 (permalink)
No Life Poster
 
orhan5's Avatar
 
Join Date: Sep 2016
Location: IN THIS WORLD
Age: 27
Posts: 522
Member: 2621892
Status: Offline
Sonork: 1677742
Thanks Meter: 139
n920t repair imei done

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Repair
Selected model: SM-N920T
Software version: 28.2

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device...
Please, allow USB debugging on phone... Ok
Reading phone info...
Model: SM-N920T
Android version: 6.0.1
Product code: SM2N920TZDATMB
Phone version: N920TUVS4DQA2
PDA version: N920TUVS4DQA2
CSC version: N920TTMB4DQA2
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone SN: RF8GC1H4SAZ
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-01-01
RF cal date: 20151224
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Initialization zTool... Ok
Running zTool, please wait... Ok
HWID: A8 56 80 4F 95 06 00 00 00 00 00 00 00 00 00 00
Calculating... Ok
Repairing... Ok
Writing NV data... Ok
Rebooting phone... Ok
Repair done

Done with Samsung Tool PRO v.28.2
  Reply With Quote
Old 06-12-2017, 10:07   #18687 (permalink)
No Life Poster
 
orhan5's Avatar
 
Join Date: Sep 2016
Location: IN THIS WORLD
Age: 27
Posts: 522
Member: 2621892
Status: Offline
Sonork: 1677742
Thanks Meter: 139
Patch Certificate SM-N920T

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Patch Certificate
Selected model: SM-N920T
Software version: 28.2

Waiting ADB device... Ok
Reading phone info...
Model: SM-N920T
Android version: 6.0.1
Product code: SM2N920TZDATMB
Phone version: N920TUVS4DQA2
PDA version: N920TUVS4DQA2
CSC version: N920TTMB4DQA2
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone SN: RF8GC1H4SAZ
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-01-01
RF cal date: 20151224
IMEI:
Checking Super user right... true
Initialization zTool... Ok
Running zTool, please wait... Ok
Reading modem... Ok
Patching modem... Ok
Writing modem... Ok
Rebooting phone... Ok
Patching CERT check... done

Done with Samsung Tool PRO v.28.2
  Reply With Quote
Old 06-12-2017, 10:19   #18688 (permalink)
No Life Poster
 
orhan5's Avatar
 
Join Date: Sep 2016
Location: IN THIS WORLD
Age: 27
Posts: 522
Member: 2621892
Status: Offline
Sonork: 1677742
Thanks Meter: 139
G920t repair imei done

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Repair
Selected model: SM-G920T
Software version: 28.2

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device... Ok
Reading phone info...
Model: SM-G920T
Android version: 6.0.1
Product code: SM-G920TZKAXAR
Phone version: G920TUES5DPK1
PDA version: G920TUES5DPK1
CSC version: G920TXAR5DPK1
CSC country code: USA
CSC sales code: XAR
HW version: REV1.0
Phone SN: R58G90F63KJ
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-11-01
RF cal date: 20150905
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Initialization zTool... Ok
Running zTool, please wait... Ok
HWID: 48 4C 44 CF 0D 04 00 00 00 00 00 00 00 00 00 00
Calculating... Ok
Repairing... Ok
Writing NV data... Ok
Rebooting phone... Ok
Repair done

Done with Samsung Tool PRO v.28.2
  Reply With Quote
Old 06-12-2017, 10:25   #18689 (permalink)
No Life Poster
 
orhan5's Avatar
 
Join Date: Sep 2016
Location: IN THIS WORLD
Age: 27
Posts: 522
Member: 2621892
Status: Offline
Sonork: 1677742
Thanks Meter: 139
G920t patch certificate

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Patch Certificate
Selected model: SM-G920T
Software version: 28.2

Waiting ADB device... Ok
Reading phone info...
Model: SM-G920T
Android version: 6.0.1
Product code: SM-G920TZKAXAR
Phone version: G920TUES5DPK1
PDA version: G920TUES5DPK1
CSC version: G920TXAR5DPK1
CSC country code: USA
CSC sales code: XAR
HW version: REV1.0
Phone SN: R58G90F63KJ
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-11-01
RF cal date: 20150905
IMEI:
Checking Super user right... true
Initialization zTool... Ok
Running zTool, please wait... Ok
Reading modem... Ok
Patching modem... Ok
Writing modem... Ok
Rebooting phone... Ok
Patching CERT check... done

Done with Samsung Tool PRO v.28.2
  Reply With Quote
Old 06-12-2017, 13:05   #18690 (permalink)
No Life Poster
 
Join Date: May 2009
Posts: 579
Member: 1043111
Status: Offline
Sonork: 1000.2
Thanks Meter: 159
Operation: Unlock
Selected model: SM-G935F
Software version: 28.2

Searching Samsung modem... detected COM436
Reading phone info... Ok
Model: SM-G935F
AP version: G935FXXU1DQEI
CSC version: G935FVFG1DQE3
CP version: G935FXXU1APG1
Product code: MOB
Phone SN: RF8H40480HJ
Unique number: 988667494E4554445A
Reading IMEI... Ok
IMEI: 358809078890789 (SIGN: OK)
Reading data from phone... Ok
Unlocking... Ok
Rebooting phone... Ok
Unlock done

Done with Samsung Tool PRO v.28.2
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Post here successfully unlock or IMEI repair LG andrew_tm Z3X-Team Products 1556 09-20-2017 19:34
Post here successfully unlock or IMEI repair Infinity Box [email protected] Infinity-Box 3 07-04-2014 16:37
Post here successfully unlock or IMEI repair LG [email protected] Z3X-Team Products 2 02-01-2011 16:29

 



All times are GMT +1. The time now is 14:22.



Powered by Searchlight © 2017 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.42705 seconds with 9 queries

SEO by vBSEO