Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 101 - GSM-Forum

llcoolr · 02-10-2013, 09:29

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [LG GT540 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

BABAK NURI · 02-12-2013, 23:56

HTC Rhyme PI46100 Resurrection Log After Replace eMMC via USB

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Rhyme (PI46100) via USB V1.0.4608.62626]

Looking for the HS-USB QDLoader Interface...OK
Open the HS-USB QDLoader Interface Port...OK

Establish connection with the Device...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Flashing the dead body...OK
Resurrection complete!

.::EXTREME::. · 02-16-2013, 08:01

Samsung S5250 or S5253 Hangs on BADA or Dead Boot can be repaired with this procedure with RIFF BOX.

1. Erase Full flash

2. Do Resurrection for BOOT Repair

3. You will get download Mode

4. Flash with Multi Downloader. Use Boot File.+ full pack.

Power On fone With battery
Now Your Fone in Normal Mode. And Now..

Repair IMEI [Original Imei On Sticker] With Tools Like Z3X. SPT...etc

Done!
Thanks To RIFF BOX!

Prem_India · 02-17-2013, 06:27

ZTE S165 Reliance EFS Repair Done

B.R.,
Prem_India

sureshshetty · 02-20-2013, 11:26

HI

HTC NEXUS ONE UNLOCKED SUCCESSFULLY

THANK YOU RIFFBOX
BEST REGARDS

papillon_01 · 02-23-2013, 02:09

Succeed Repair samsung S5830 and HUAWEI U8815
bigggggggg thanks riff team

S5830 log :

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung S5830 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x303C10E1 - CORRECT!
Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Flashing the dead body...OK
Resurrection complete!

U8815 log :

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Huawei U8815 V1.0.4723.8563]

Connecting to the dead body...OK
Detected dead body ID: 0x106230E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (XINYH, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (XINYH, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3,61GB

Flashing the dead body...OK
Resurrection complete!

mobilegsm30 · 02-23-2013, 16:10

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4798.9590]

Connecting to the dead body...OK
Detected dead body ID: 0x007700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (XINYH, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (XINYH, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

arthur1964 · 02-25-2013, 00:40

Repaired boot ok after changing sample speed to 1Mhz

vuongkien79 · 02-25-2013, 06:19

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung E120S V1.0.4792.5295]

Connecting to the dead body...OK
Detected dead body ID: 0x106A10E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (KYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (KYL00M, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...OK
Resurrection complete!

galijus · 02-25-2013, 12:38

Use usb-jig to force download mode after resurrection:

Prem_India · 02-26-2013, 04:40

Nokia 1255 Dead Recover Done

B.R.,
Prem_India

zeroualot_7 · 02-26-2013, 13:42

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung S5830 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x303C10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Flashing the dead body...OK
Resurrection complete!

bk.gsm · 02-27-2013, 15:18

[2/27/2013 3:52:31 PM] [START OPERATION_ID = RESURRECT]
[2/27/2013 3:52:39 PM] Open serial port...OK
[2/27/2013 3:52:39 PM] Connecting to the RIFF Box...OK
[2/27/2013 3:52:39 PM] Firmware Version: 1.34, JTAG Manager Version: 1.48
[2/27/2013 3:52:39 PM] Selected Resurrector: [Samsung I9000 V1.00]
[2/27/2013 3:52:39 PM]
[2/27/2013 3:52:39 PM] Connecting to the dead body...OK
[2/27/2013 3:52:39 PM] Detected dead body ID: 0x1BA00477 - CORRECT!
[2/27/2013 3:52:39 PM] Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz
[2/27/2013 3:52:39 PM]
[2/27/2013 3:52:39 PM] Resurrection sequence started.
[2/27/2013 3:52:39 PM] Establish communication with the phone...OK
[2/27/2013 3:52:39 PM] Initializing internal hardware configuration...OK
[2/27/2013 3:52:39 PM] Uploading resurrector data into memory...OK
[2/27/2013 3:52:39 PM] Starting communication with resurrector...OK
[2/27/2013 3:52:39 PM]
[2/27/2013 3:52:39 PM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
[2/27/2013 3:52:39 PM] Flashing the dead body...
[2/27/2013 3:52:39 PM] [FINISH OPERATION_ID = RESURRECT]

[2/27/2013 3:52:42 PM] [START OPERATION_ID = RESURRECT]
[2/27/2013 3:52:56 PM] Open serial port...OK
[2/27/2013 3:52:56 PM] Connecting to the RIFF Box...OK
[2/27/2013 3:52:56 PM] Firmware Version: 1.34, JTAG Manager Version: 1.48
[2/27/2013 3:52:56 PM] Selected Resurrector: [Samsung I9000 V1.00]
[2/27/2013 3:52:56 PM]
[2/27/2013 3:52:56 PM] Connecting to the dead body...OK
[2/27/2013 3:52:56 PM] Detected dead body ID: 0x1BA00477 - CORRECT!
[2/27/2013 3:52:56 PM] Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz
[2/27/2013 3:52:56 PM]
[2/27/2013 3:52:56 PM] Resurrection sequence started.
[2/27/2013 3:52:56 PM] Establish communication with the phone...OK
[2/27/2013 3:52:56 PM] Initializing internal hardware configuration...OK
[2/27/2013 3:52:56 PM] Uploading resurrector data into memory...OK
[2/27/2013 3:52:56 PM] Starting communication with resurrector...OK
[2/27/2013 3:52:56 PM]
[2/27/2013 3:52:56 PM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
[2/27/2013 3:52:56 PM] Flashing the dead body...OK
[2/27/2013 3:52:56 PM] Resurrection complete!
[2/27/2013 3:52:56 PM] [FINISH OPERATION_ID = RESURRECT]

[2/27/2013 3:53:40 PM] ------------------------------- JTAG Manager Session Closed

bk.gsm · 02-27-2013, 15:19

Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9000 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

Saulcell · 02-27-2013, 16:13

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung i777 V1.0.0.0]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0001 (VYL00M, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...OK
Resurrection complete!

02-16-2013, 08:01	#1503 (permalink)
.::EXTREME::. No Life Poster Join Date: Jul 2011 Location: ۞_ KERALA__۞_INDIA Posts: 3,352 Member: 1619462 Status: Offline Sonork: 100.1606509 Thanks Meter: 1,517	Samsung S5250 or S5253 Hangs on BADA or Dead Boot Can Be Repaired With This Procedure Samsung S5250 or S5253 Hangs on BADA or Dead Boot can be repaired with this procedure with RIFF BOX. 1. Erase Full flash 2. Do Resurrection for BOOT Repair 3. You will get download Mode 4. Flash with Multi Downloader. Use Boot File.+ full pack. Power On fone With battery Now Your Fone in Normal Mode. And Now.. Repair IMEI [Original Imei On Sticker] With Tools Like Z3X. SPT...etc Done! Thanks To RIFF BOX!

02-20-2013, 11:26	#1505 (permalink)
sureshshetty No Life Poster Join Date: Feb 2009 Location: INDIA Posts: 543 Member: 973227 Status: Offline Sonork: 100.1583121 Thanks Meter: 270	Htc nexuS one unlocked successfully HI HTC NEXUS ONE UNLOCKED SUCCESSFULLY THANK YOU RIFFBOX BEST REGARDS

02-25-2013, 00:40	#1508 (permalink)
arthur1964 Freak Poster Join Date: Feb 2008 Location: Spain Posts: 113 Member: 702604 Status: Offline Thanks Meter: 12	HTC HD2 Repair boot OK! Repaired boot ok after changing sample speed to 1Mhz

02-25-2013, 12:38	#1510 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	N7000 done success Use usb-jig to force download mode after resurrection:

02-17-2013, 06:27	#1504 (permalink)
Prem_India Product Supporter Join Date: Mar 2008 Location: India Posts: 1,959 Member: 718725 Status: Offline Sonork: 100.1604953 QQ 2339690693 Thanks Meter: 6,702	ZTE S165 Reliance EFS Repair Done B.R., Prem_India

02-25-2013, 06:19	#1509 (permalink)
vuongkien79 Freak Poster Join Date: Jun 2012 Location: viet nam Posts: 187 Member: 1776297 Status: Offline Thanks Meter: 53	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung E120S V1.0.4792.5295] Connecting to the dead body...OK Detected dead body ID: 0x106A10E1 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (KYL00M, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (KYL00M, 0x000000080000 Bytes = 0.50 MB) Flashing the dead body...OK Resurrection complete!

02-26-2013, 04:40	#1511 (permalink)
Prem_India Product Supporter Join Date: Mar 2008 Location: India Posts: 1,959 Member: 718725 Status: Offline Sonork: 100.1604953 QQ 2339690693 Thanks Meter: 6,702	Nokia 1255 Dead Recover Done B.R., Prem_India

02-26-2013, 13:42	#1512 (permalink)
zeroualot_7 No Life Poster Join Date: Jan 2005 Location: at work Posts: 914 Member: 112112 Status: Offline Sonork: 100.1621373 Thanks Meter: 238	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung S5830 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x303C10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

02-27-2013, 15:19	#1514 (permalink)
bk.gsm Product Supporter Join Date: Sep 2008 Location: UMT Support section Age: 33 Posts: 3,774 Member: 869809 Status: Offline Thanks Meter: 1,706	Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9000 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

02-27-2013, 16:13	#1515 (permalink)
Saulcell No Life Poster Join Date: May 2006 Location: The_Colombian_Team ! Posts: 802 Member: 278939 Status: Offline Sonork: 100.1593095 Thanks Meter: 382	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung i777 V1.0.0.0] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0001 (VYL00M, 0x000000080000 Bytes = 0.50 MB) Flashing the dead body...OK Resurrection complete!