Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 105 - GSM-Forum

unlock phones · 04-27-2013, 07:39

Repaired dead boot HTC desire

recekeshgosh · 04-27-2013, 15:15

samsung n7000 note1 boot repair done

recekeshgosh · 04-27-2013, 15:20

samsung n7000 note1 boot repair done

mastersgsm · 04-30-2013, 19:51

CDMA 450 QUALCOMM QSC 1110 flashing done THANKS!!! I love RIFF JTAG

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Target: [QSC1110, 1.80V, TAP0]

Connecting to the QSC1110 target...OK
Detected dead body ID: 0x122CF0E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 800 kHz]

Resetting and Halting target...OK

R0 = 0x00005DC0 R6 = 0x58014DF8 R12 = 0xFFFF5EB3
R1 = 0x00005DC0 R7 = 0x58000128 R13 = 0x5800FFB8
R2 = 0x0000FFFF R8 = 0x019C794C R14 = 0x080443AC
R3 = 0x80002000 R9 = 0x680F8101 R15 = 0x080443D4
R4 = 0x000001F4 R10 = 0x8C6142EC CPSR = 0x800000D3
R5 = 0x00000014 R11 = 0x8A884804

Connecting to the NOR Memory based at 0x00000000...OK
Detected an Initialized FLASH1 Chip, ID: 0x0020/0x88C0 (8MB)

Flashing directly the NOR Memory based at 0x00000000...OK
Completed in 00:06:06.312 (Average Transfer Rate: 22.36 kB/s)

shinod · 05-02-2013, 11:09

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung W299 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x120FC0E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0x0079 (128MB)
Selected Resurrection Data for the NAND Chip with Page size = 512B

Flashing the dead body...OK
Resurrection complete!
success fully repaired W299 thanks riff team

dimityr.milev · 05-03-2013, 12:11

i8320 repair done............

vuongkien79 · 05-05-2013, 05:09

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Pantech A830L V1.0.4702.8081]

Connecting to the dead body...OK
Detected dead body ID: 0x406B10E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

jmr · 05-07-2013, 09:43

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [HTC OneX (PJ8310000) V1.0.4800.54064]

Connecting to the dead body...OK
Detected dead body ID: 0x406B50E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

galijus · 05-08-2013, 14:34

mogrem.soft · 05-09-2013, 17:35

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9070 V1.0.4762.51152]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D2000000 Bytes = 7.28 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB

Flashing the dead body...OK
Resurrection complete!

.:MobileLife:. · 05-11-2013, 09:39

Samsung i9070 dead boot repair done.

.:MobileLife:.

pulian · 05-11-2013, 23:50

LG e615

Benhure · 05-14-2013, 09:56

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I535 V1.0.4717.59182]

Connecting to the dead body...OK
Detected dead body ID: 0x406B10E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB

Flashing the dead body...OK
Resurrection complete!

sebY7676 · 05-14-2013, 14:03

Lg P500 repaired successfully, but lost imei..

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [LG P500 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

jmr · 05-18-2013, 23:46

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [HTC Magic 32A V1.02]

Connecting to the dead body...OK
Detected dead body ID: 0x201700E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00AD/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

05-08-2013, 14:34	#1569 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	Unlock Htc Desire X

05-11-2013, 09:39	#1571 (permalink)
.:MobileLife:. No Life Poster Join Date: Oct 2005 Location: iSiddeque Age: 41 Posts: 2,009 Member: 188260 Status: Offline Sonork: 100.1590438 Thanks Meter: 428	Samsung i9070 dead boot repair done. Samsung i9070 dead boot repair done. .:MobileLife:.

04-27-2013, 07:39	#1561 (permalink)
unlock phones No Life Poster Join Date: Apr 2011 Posts: 3,207 Member: 1552610 Status: Offline Sonork: 100.1604734 Thanks Meter: 1,370	Repaired dead boot HTC desire

04-30-2013, 19:51	#1564 (permalink)
mastersgsm Freak Poster Join Date: Dec 2010 Location: Uzbekistan/Jizzakh Posts: 425 Member: 1470188 Status: Offline Sonork: 100.1638921 Thanks Meter: 88	CDMA 450 QUALCOMM QSC 1110 flashing done THANKS!!! I love RIFF JTAG Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Target: [QSC1110, 1.80V, TAP0] Connecting to the QSC1110 target...OK Detected dead body ID: 0x122CF0E1 - IGNORED! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 800 kHz] Resetting and Halting target...OK R0 = 0x00005DC0 R6 = 0x58014DF8 R12 = 0xFFFF5EB3 R1 = 0x00005DC0 R7 = 0x58000128 R13 = 0x5800FFB8 R2 = 0x0000FFFF R8 = 0x019C794C R14 = 0x080443AC R3 = 0x80002000 R9 = 0x680F8101 R15 = 0x080443D4 R4 = 0x000001F4 R10 = 0x8C6142EC CPSR = 0x800000D3 R5 = 0x00000014 R11 = 0x8A884804 Connecting to the NOR Memory based at 0x00000000...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x88C0 (8MB) Flashing directly the NOR Memory based at 0x00000000...OK Completed in 00:06:06.312 (Average Transfer Rate: 22.36 kB/s)

05-02-2013, 11:09	#1565 (permalink)
shinod No Life Poster Join Date: Feb 2004 Location: India Age: 51 Posts: 1,175 Member: 55363 Status: Offline Thanks Meter: 146	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung W299 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x120FC0E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0098/0x0079 (128MB) Selected Resurrection Data for the NAND Chip with Page size = 512B Flashing the dead body...OK Resurrection complete! success fully repaired W299 thanks riff team

05-05-2013, 05:09	#1567 (permalink)
vuongkien79 Freak Poster Join Date: Jun 2012 Location: viet nam Posts: 187 Member: 1776297 Status: Offline Thanks Meter: 53	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Pantech A830L V1.0.4702.8081] Connecting to the dead body...OK Detected dead body ID: 0x406B10E1 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MAG2GA, 0x000000200000 Bytes = 2.00 MB) Flashing the dead body...OK Resurrection complete!

05-07-2013, 09:43	#1568 (permalink)
jmr No Life Poster Join Date: Oct 2007 Location: Colombia Posts: 1,812 Member: 614683 Status: Offline Sonork: 100.1605379 Thanks Meter: 370	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [HTC OneX (PJ8310000) V1.0.4800.54064] Connecting to the dead body...OK Detected dead body ID: 0x406B50E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB) Flashing the dead body...OK Resurrection complete!

05-09-2013, 17:35	#1570 (permalink)
mogrem.soft No Life Poster Join Date: Dec 2008 Location: Cairo/Egypt Age: 36 Posts: 632 Member: 914426 Status: Offline Sonork: 01017474627 Thanks Meter: 235	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9070 V1.0.4762.51152] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D2000000 Bytes = 7.28 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB Flashing the dead body...OK Resurrection complete!

05-11-2013, 23:50	#1572 (permalink)
pulian Freak Poster Join Date: Mar 2006 Location: COL Posts: 262 Member: 242451 Status: Offline Thanks Meter: 63	LG e615

05-14-2013, 09:56	#1573 (permalink)
Benhure Freak Poster Join Date: Oct 2001 Location: Earth Posts: 248 Member: 6884 Status: Offline Sonork: 100.1621477 Thanks Meter: 105	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung I535 V1.0.4717.59182] Connecting to the dead body...OK Detected dead body ID: 0x406B10E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x000000200000 Bytes = 2.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB Flashing the dead body...OK Resurrection complete!

05-18-2013, 23:46	#1575 (permalink)
jmr No Life Poster Join Date: Oct 2007 Location: Colombia Posts: 1,812 Member: 614683 Status: Offline Sonork: 100.1605379 Thanks Meter: 370	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [HTC Magic 32A V1.02] Connecting to the dead body...OK Detected dead body ID: 0x201700E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00AD/0x55BC (512MB) Flashing the dead body...OK Resurrection complete!