Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 107 - GSM-Forum

Momo_Gsm · 06-02-2013, 02:38

SAMSUNG S 5830i dead boot repaid via RIFF:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung S5830i V1.0.4476.13359]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
Resurrection complete!

BR MOMO.

naushad09 · 06-02-2013, 16:23

huwai C2830 hang on tata solved

nbkappa · 06-02-2013, 20:06

Quote:

Originally Posted by maplegsm

Br

UMER

hello

i need to flash AMOI WP-S1 (phone stuck on 3 Logo)

where to get ressurector and flash for AMOI WP-S1 ? couldnt find it in DLL's list.

thanks

rpl..beng · 06-03-2013, 12:05

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9100 V1.0.4843.51977]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB

Flashing the dead body...OK
Resurrection complete!

naushad09 · 06-05-2013, 07:53

Samsung corby2 sucessfully recover ....
i got handset conti.. restarting and all usb track missing.

write dump with riff and sucess

thnx

riff team

vuongkien79 · 06-05-2013, 08:55

s5830 repair boot ok

Dilip_Nath · 06-08-2013, 08:51

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung M110S V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 6 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

farodriguez · 06-10-2013, 04:59

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4841.63397]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x007700E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HYNIX, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HYNIX, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

OHIIM · 06-11-2013, 18:14

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung T959 V1.0.4717.12389]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
Resurrection complete!

OHIIM · 06-11-2013, 18:42

boot fix done
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung S5230 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x00BA (256MB)
Flashing the dead body...OK
Resurrection complete!

OHIIM · 06-13-2013, 18:05

samsung boot fixed done by riff

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB

Flashing the dead body...OK
Resurrection complete!

ReyTech · 06-15-2013, 13:59

Quote:

Originally Posted by ******_antonov

Firmware Version: 1.16, JTAG Manager Version: 1.21
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x55BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 2KB

Unlocking the Phone...OK
Unlock complete!

where is the unlock button? or just pressing resurrection unlocks the phone? pls inform, i need to unlock a one v and cant do it!
wbr
ReyTech.

crazygenius3 · 06-16-2013, 11:20

I Repaired Desire X with out any Problem

here is log

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4841.63397]
Restarting target (nRST Low then High)...OK
Connecting to the dead body...OK
Detected dead body ID: 0x007700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HYNIX, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HYNIX, 0x000000200000 Bytes = 2.00 MB)
Flashing the dead body...OK
Resurrection complete!

[email protected] · 06-19-2013, 08:53

samsung P6200 dead boot done....

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung P6200 V1.0.0.0]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (MAG4FA, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0001 (MAG4FA, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...OK
Resurrection complete!

nestor françois · 06-20-2013, 10:53

i try repair boot samsung s5570i with riff jtag but i get this:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung S5570i V1.0.4476.11820]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - IGNORED!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000080000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000100000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000001280000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000001300000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000001480000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF00000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF80000 is handled as Cut Excess.
Resurrection complete!

and phone not power on and cannot enter in dowload mode too
Please help me trying to explain

06-03-2013, 12:05	#1594 (permalink)
rpl..beng Junior Member Join Date: Mar 2008 Posts: 9 Member: 723853 Status: Offline Thanks Meter: 1	I9100 dead boot repaired successfully Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9100 V1.0.4843.51977] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB Flashing the dead body...OK Resurrection complete!

06-16-2013, 11:20	#1603 (permalink)
crazygenius3 No Life Poster Join Date: Mar 2006 Location: PAKISTAN/MULTAN Posts: 657 Member: 242838 Status: Offline Thanks Meter: 83	Desire x done I Repaired Desire X with out any Problem here is log Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4841.63397] Restarting target (nRST Low then High)...OK Connecting to the dead body...OK Detected dead body ID: 0x007700E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HYNIX, 0x0000E7000000 Bytes = 3.61 GB) Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HYNIX, 0x000000200000 Bytes = 2.00 MB) Flashing the dead body...OK Resurrection complete!

06-19-2013, 08:53	#1604 (permalink)
[email protected] Member deceased !! Join Date: Jan 2008 Location: DreamSunlock Canada,TH,CN,BD Age: 36 Posts: 2,846 Member: 670820 Status: Offline Sonork: 100.1583728 Thanks Meter: 1,348	p6200 done samsung P6200 dead boot done.... Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung P6200 V1.0.0.0] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (MAG4FA, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0001 (MAG4FA, 0x000000080000 Bytes = 0.50 MB) Flashing the dead body...OK Resurrection complete!

06-02-2013, 02:38	#1591 (permalink)
Momo_Gsm No Life Poster Join Date: Apr 2008 Location: Where Dreams Comes True...S4U Posts: 5,362 Member: 755709 Status: Offline Sonork: 100.1592000 Momo... Thanks Meter: 6,635	SAMSUNG S 5830i dead boot repaid via RIFF: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung S5830i V1.0.4476.13359] Connecting to the dead body...OK Detected dead body ID: 0x07B3617F - CORRECT! Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Selected Resurrection Data for the NAND Chip with Page size = 4KB Flashing the dead body...OK Resurrection complete! BR MOMO.

06-02-2013, 16:23	#1592 (permalink)
naushad09 No Life Poster Join Date: Jan 2006 Location: E a r T h Posts: 733 Member: 216094 Status: Offline Thanks Meter: 321	huwai C2830 hang on tata solved

06-05-2013, 07:53	#1595 (permalink)
naushad09 No Life Poster Join Date: Jan 2006 Location: E a r T h Posts: 733 Member: 216094 Status: Offline Thanks Meter: 321	Samsung corby2 sucessfully recover .... i got handset conti.. restarting and all usb track missing. write dump with riff and sucess thnx riff team

06-05-2013, 08:55	#1596 (permalink)
vuongkien79 Freak Poster Join Date: Jun 2012 Location: viet nam Posts: 187 Member: 1776297 Status: Offline Thanks Meter: 53	s5830 repair boot ok

06-11-2013, 18:14	#1599 (permalink)
OHIIM Cheater -Don't Deal with him- Join Date: Mar 2006 Location: ACCRA GHANA Age: 39 Posts: 827 Member: 244250 Status: Offline Sonork: 100.160773 Thanks Meter: 196	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung T959 V1.0.4717.12389] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Selected Resurrection Data for the NAND Chip with Page size = 4KB Flashing the dead body...OK Resurrection complete!

06-11-2013, 18:42	#1600 (permalink)
OHIIM Cheater -Don't Deal with him- Join Date: Mar 2006 Location: ACCRA GHANA Age: 39 Posts: 827 Member: 244250 Status: Offline Sonork: 100.160773 Thanks Meter: 196	boot fix done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung S5230 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x07926F0F - CORRECT! Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x002C/0x00BA (256MB) Flashing the dead body...OK Resurrection complete!

06-13-2013, 18:05	#1601 (permalink)
OHIIM Cheater -Don't Deal with him- Join Date: Mar 2006 Location: ACCRA GHANA Age: 39 Posts: 827 Member: 244250 Status: Offline Sonork: 100.160773 Thanks Meter: 196	samsung boot fixed done by riff Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung I8160 V1.0.4705.16807] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB Flashing the dead body...OK Resurrection complete!

06-20-2013, 10:53	#1605 (permalink)
nestor françois Freak Poster Join Date: May 2008 Location: Dakar Posts: 101 Member: 783356 Status: Offline Sonork: 71047 Thanks Meter: 11	i try repair boot samsung s5570i with riff jtag but i get this: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung S5570i V1.0.4476.11820] Connecting to the dead body...OK Detected dead body ID: 0x07B3617F - IGNORED! Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Selected Resurrection Data for the NAND Chip with Page size = 4KB Flashing the dead body...OK WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess. WARNING: Programming Error (0x25) at 0x000000080000 is handled as Cut Excess. WARNING: Programming Error (0x25) at 0x000000100000 is handled as Cut Excess. WARNING: Programming Error (0x25) at 0x000001280000 is handled as Cut Excess. WARNING: Programming Error (0x25) at 0x000001300000 is handled as Cut Excess. WARNING: Programming Error (0x25) at 0x000001480000 is handled as Cut Excess. WARNING: Programming Error (0x25) at 0x00001FF00000 is handled as Cut Excess. WARNING: Programming Error (0x25) at 0x00001FF80000 is handled as Cut Excess. Resurrection complete! and phone not power on and cannot enter in dowload mode too Please help me trying to explain