Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 57 - GSM-Forum

MOHIT_THAREJA · 09-24-2011, 14:10

huawei c2821 red blink repair done

Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Huawei C2801]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8852 (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
Completed in 00:03:01.891 (Average Transfer Rate: 22.52 kB/s)

perotskie · 09-24-2011, 17:47

Thanks a lot with riffbox
Today i done 13pcs G-I9000
Dead Boot...
Flashing very fast and very easy to operated.

thank you very much and keep on supporting us.

this is the last one i've done, LOGS

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.23, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung I9000]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 18 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

SFR-_-MAN · 09-24-2011, 21:04

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Flashing the dead body...OK
Resurrection complete!

Akili Bulent · 09-25-2011, 12:37

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC WildfireS]

Connecting to the dead body...OK
Detected dead body ID: 0x203C10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 4KB

Unlocking the Phone...OK
Unlock code is: 01801210
Unlock complete!

MOHIT_THAREJA · 09-26-2011, 13:00

huawei c2801 blink repair done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Huawei C2801]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8852 (4MB)

Resuming write FLASH1 memory from 0x0000000000 to 0x00003FFFFF on 0x00003B0000
Completed in 00:00:10.281 (Average Transfer Rate: 398.40 kB/s)

MOHIT_THAREJA · 09-26-2011, 14:20

huawei c2808 dead recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Huawei C2801]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)

Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...
Settings Code: 0x0900010000800000000000000026
Settings Code: 0x0900010000800000000000000026
Settings Code: 0x0900010000800000000000000026
Settings Code: 0x0900010000800000000000000026
Settings Code: 0x0900010000800000000000000026
Settings Code: 0x0900010000800000000000000026OK
Completed in 00:05:16.875 (Average Transfer Rate: 25.85 kB/s)

MOHIT_THAREJA · 09-26-2011, 14:40

huawei c2806 recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Huawei C2801]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...
Settings Code: 0x0900010000400000000000000026
Settings Code: 0x0900010000400000000000000026
Settings Code: 0x0900010000400000000000000026OK
Completed in 00:02:47.266 (Average Transfer Rate: 24.49 kB/s)

M0YAL · 09-26-2011, 16:17

[9/26/2011 7:40:54 PM] Open serial port...OK
[9/26/2011 7:40:54 PM] Connecting to the RIFF Box...OK
[9/26/2011 7:40:54 PM] Firmware Version: 1.26, JTAG Manager Version: 1.35
[9/26/2011 7:40:54 PM] Selected Resurrector: [QSC60XX L20 D08]
[9/26/2011 7:40:54 PM]
[9/26/2011 7:40:54 PM] Connecting to the dead body...OK
[9/26/2011 7:40:54 PM] Detected dead body ID: 0x220B10E1 - CORRECT!
[9/26/2011 7:40:54 PM] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[9/26/2011 7:40:54 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[9/26/2011 7:40:54 PM] Settings Code: 0x0000010000800000000000000034
[9/26/2011 7:40:54 PM]
[9/26/2011 7:40:54 PM] Resurrection sequence started.
[9/26/2011 7:40:54 PM] Establish communication with the phone...OK
[9/26/2011 7:40:54 PM] Initializing internal hardware configuration...OK
[9/26/2011 7:40:54 PM] Uploading resurrector data into memory...OK
[9/26/2011 7:40:54 PM] Starting communication with resurrector...OK
[9/26/2011 7:40:54 PM]
[9/26/2011 7:40:54 PM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)
[9/26/2011 7:40:54 PM]
[9/26/2011 7:40:54 PM] Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
[9/26/2011 7:40:54 PM] Completed in 00:02:20.188 (Average Transfer Rate: 58.44 kB/s)
[9/26/2011 7:40:54 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]

DHEERAJ_SHARMA · 09-27-2011, 05:25

riff box best box...............

M0YAL · 09-27-2011, 08:09

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Nokia 1255]

Connecting to the dead body...OK
Detected dead body ID: 0x1F0F0F0F - CORRECT!
Set I/O Voltage reads as 2.98V, TCK Frequency is 4 MHz
Settings Code: 0x0009010000800000000000000034

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x017E/0x220A (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
Completed in 00:01:27.437 (Average Transfer Rate: 46.85 kB/s)

M0YAL · 09-27-2011, 12:44

[9/27/2011 5:13:41 PM] Open serial port...OK
[9/27/2011 5:13:41 PM] Connecting to the RIFF Box...OK
[9/27/2011 5:13:41 PM] Firmware Version: 1.26, JTAG Manager Version: 1.35
[9/27/2011 5:13:41 PM] Selected Resurrector: [QSC60XX L20 D08]
[9/27/2011 5:13:41 PM]
[9/27/2011 5:13:41 PM] Connecting to the dead body...OK
[9/27/2011 5:13:41 PM] Detected dead body ID: 0x200B10E1 - CORRECT!
[9/27/2011 5:13:41 PM] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[9/27/2011 5:13:41 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[9/27/2011 5:13:41 PM] Settings Code: 0x0000010000400000000000000034
[9/27/2011 5:13:41 PM]
[9/27/2011 5:13:41 PM] Resurrection sequence started.
[9/27/2011 5:13:41 PM] Establish communication with the phone...OK
[9/27/2011 5:13:41 PM] Initializing internal hardware configuration...OK
[9/27/2011 5:13:41 PM] Uploading resurrector data into memory...OK
[9/27/2011 5:13:41 PM] Starting communication with resurrector...OK
[9/27/2011 5:13:41 PM]
[9/27/2011 5:13:41 PM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)
[9/27/2011 5:13:41 PM]
[9/27/2011 5:13:41 PM] Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
[9/27/2011 5:13:41 PM] Completed in 00:02:17.469 (Average Transfer Rate: 59.59 kB/s)
[9/27/2011 5:13:41 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]

M0YAL · 09-27-2011, 12:58

[9/27/2011 5:23:06 PM] Open serial port...OK
[9/27/2011 5:23:06 PM] Connecting to the RIFF Box...OK
[9/27/2011 5:23:06 PM] Firmware Version: 1.26, JTAG Manager Version: 1.35
[9/27/2011 5:23:06 PM] Selected Resurrector: [QSC60XX L20 D08]
[9/27/2011 5:23:06 PM]
[9/27/2011 5:23:06 PM] Connecting to the dead body...OK
[9/27/2011 5:23:06 PM] Detected dead body ID: 0x220B10E1 - CORRECT!
[9/27/2011 5:23:06 PM] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[9/27/2011 5:23:06 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[9/27/2011 5:23:06 PM] Settings Code: 0x0000010000800000000000000034
[9/27/2011 5:23:06 PM]
[9/27/2011 5:23:06 PM] Resurrection sequence started.
[9/27/2011 5:23:06 PM] Establish communication with the phone...OK
[9/27/2011 5:23:06 PM] Initializing internal hardware configuration...OK
[9/27/2011 5:23:06 PM] Uploading resurrector data into memory...OK
[9/27/2011 5:23:06 PM] Starting communication with resurrector...OK
[9/27/2011 5:23:06 PM]
[9/27/2011 5:23:06 PM] Detected an Initialized FLASH1 Chip, ID: 0x0098/0x0096 (8MB)
[9/27/2011 5:23:06 PM]
[9/27/2011 5:23:06 PM] Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
[9/27/2011 5:23:06 PM] Completed in 00:02:24.703 (Average Transfer Rate: 56.61 kB/s)
[9/27/2011 5:23:06 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]

mayank.gupta · 09-27-2011, 14:45

Quote:

Originally Posted by lalitg

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [USB Modem EC1260]

Connecting to the dead body...OK
Detected dead body ID: 0x120F80E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x0036 (64MB)

Writting FLASH1 address space from 0x00000000 to 0x03FFFFFF
Completed in 00:02:39.765 (Average Transfer Rate: 423.02 kB/s)

WBR
LALITG

need Huawei ec1260 unlock dump file pl help

thanks

M0YAL · 09-28-2011, 07:32

[9/28/2011 11:58:24 AM] Open serial port...OK
[9/28/2011 11:58:25 AM] Connecting to the RIFF Box...OK
[9/28/2011 11:58:25 AM] Firmware Version: 1.26, JTAG Manager Version: 1.35
[9/28/2011 11:58:25 AM] Selected Resurrector: [QSC60XX L20 D08]
[9/28/2011 11:58:25 AM]
[9/28/2011 11:58:25 AM] Connecting to the dead body...OK
[9/28/2011 11:58:25 AM] Detected dead body ID: 0x220B10E1 - CORRECT!
[9/28/2011 11:58:25 AM] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[9/28/2011 11:58:25 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[9/28/2011 11:58:25 AM] Settings Code: 0x0000010000800000000000000034
[9/28/2011 11:58:25 AM]
[9/28/2011 11:58:25 AM] Resurrection sequence started.
[9/28/2011 11:58:25 AM] Establish communication with the phone...OK
[9/28/2011 11:58:25 AM] Initializing internal hardware configuration...OK
[9/28/2011 11:58:25 AM] Uploading resurrector data into memory...OK
[9/28/2011 11:58:25 AM] Starting communication with resurrector...OK
[9/28/2011 11:58:25 AM]
[9/28/2011 11:58:25 AM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)
[9/28/2011 11:58:25 AM]
[9/28/2011 11:58:25 AM] Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
[9/28/2011 11:58:25 AM] Completed in 00:02:19.329 (Average Transfer Rate: 58.80 kB/s)
[9/28/2011 11:58:25 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]

M0YAL · 09-28-2011, 07:42

[9/28/2011 12:10:45 PM] Open serial port...OK
[9/28/2011 12:10:45 PM] Connecting to the RIFF Box...OK
[9/28/2011 12:10:45 PM] Firmware Version: 1.26, JTAG Manager Version: 1.35
[9/28/2011 12:10:45 PM] Selected Resurrector: [QSC60XX L20 D08]
[9/28/2011 12:10:45 PM]
[9/28/2011 12:10:45 PM] Connecting to the dead body...OK
[9/28/2011 12:10:45 PM] Detected dead body ID: 0x220B10E1 - CORRECT!
[9/28/2011 12:10:45 PM] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[9/28/2011 12:10:45 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[9/28/2011 12:10:45 PM] Settings Code: 0x0000010000800000000000000034
[9/28/2011 12:10:45 PM]
[9/28/2011 12:10:45 PM] Resurrection sequence started.
[9/28/2011 12:10:45 PM] Establish communication with the phone...OK
[9/28/2011 12:10:45 PM] Initializing internal hardware configuration...OK
[9/28/2011 12:10:45 PM] Uploading resurrector data into memory...OK
[9/28/2011 12:10:45 PM] Starting communication with resurrector...OK
[9/28/2011 12:10:45 PM]
[9/28/2011 12:10:45 PM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)
[9/28/2011 12:10:45 PM]
[9/28/2011 12:10:45 PM] Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
[9/28/2011 12:10:45 PM] Completed in 00:02:21.750 (Average Transfer Rate: 57.79 kB/s)
[9/28/2011 12:10:45 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]

09-27-2011, 08:09	#850 (permalink)
M0YAL No Life Poster Join Date: May 2011 Location: india Posts: 1,679 Member: 1583254 Status: Offline Sonork: 100.1602320 Thanks Meter: 4,792	Zte C401 Off-Line Recover Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Nokia 1255] Connecting to the dead body...OK Detected dead body ID: 0x1F0F0F0F - CORRECT! Set I/O Voltage reads as 2.98V, TCK Frequency is 4 MHz Settings Code: 0x0009010000800000000000000034 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x017E/0x220A (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF Completed in 00:01:27.437 (Average Transfer Rate: 46.85 kB/s)

09-24-2011, 14:10	#841 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2821 red blink repair done Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Huawei C2801] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8852 (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF Completed in 00:03:01.891 (Average Transfer Rate: 22.52 kB/s)

09-24-2011, 17:47	#842 (permalink)
perotskie Major Poster Join Date: Jul 2008 Location: kingdom of saudi arabia Posts: 40 Member: 804793 Status: Offline Sonork: perotskie Thanks Meter: 3	Thanks a lot with riffbox Today i done 13pcs G-I9000 Dead Boot... Flashing very fast and very easy to operated. thank you very much and keep on supporting us. this is the last one i've done, LOGS Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.23, JTAG Manager Version: 1.29 Selected Resurrector: [Samsung I9000] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 18 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

09-24-2011, 21:04	#843 (permalink)
SFR-_-MAN Freak Poster Join Date: Aug 2011 Location: SFR Posts: 209 Member: 1633151 Status: Offline Sonork: SFR-_-MAN Thanks Meter: 72	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Flashing the dead body...OK Resurrection complete!

09-25-2011, 12:37	#844 (permalink)
Akili Bulent Freak Poster Join Date: Feb 2005 Location: Paris Age: 47 Posts: 239 Member: 113924 Status: Offline Thanks Meter: 29	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC WildfireS] Connecting to the dead body...OK Detected dead body ID: 0x203C10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB) Selected Unlocking Data for the NAND Chip with Page size = 4KB Unlocking the Phone...OK Unlock code is: 01801210 Unlock complete!

09-26-2011, 13:00	#845 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2801 blink repair done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Huawei C2801] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8852 (4MB) Resuming write FLASH1 memory from 0x0000000000 to 0x00003FFFFF on 0x00003B0000 Completed in 00:00:10.281 (Average Transfer Rate: 398.40 kB/s)

09-26-2011, 14:20	#846 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2808 dead recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Huawei C2801] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB) Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF ERROR: Timeout while waiting for DCC Loader response. Trying to recover... Settings Code: 0x0900010000800000000000000026 Settings Code: 0x0900010000800000000000000026 Settings Code: 0x0900010000800000000000000026 Settings Code: 0x0900010000800000000000000026 Settings Code: 0x0900010000800000000000000026 Settings Code: 0x0900010000800000000000000026OK Completed in 00:05:16.875 (Average Transfer Rate: 25.85 kB/s)

09-26-2011, 14:40	#847 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2806 recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Huawei C2801] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF ERROR: Timeout while waiting for DCC Loader response. Trying to recover... Settings Code: 0x0900010000400000000000000026 Settings Code: 0x0900010000400000000000000026 Settings Code: 0x0900010000400000000000000026OK Completed in 00:02:47.266 (Average Transfer Rate: 24.49 kB/s)